[PATCH 10/10] drm/panel: simple: Use dev_err_probe() to simplify code
Yuan Can
yuancan at huawei.com
Thu Sep 29 01:26:36 UTC 2022
在 2022/9/29 7:03, Doug Anderson 写道:
> Hi,
>
> On Fri, Sep 23, 2022 at 6:59 PM Yuan Can <yuancan at huawei.com> wrote:
>> In the probe path, dev_err() can be replaced with dev_err_probe()
>> which will check if error code is -EPROBE_DEFER and prints the
>> error name. It also sets the defer probe reason which can be
>> checked later through debugfs.
>>
>> Signed-off-by: Yuan Can <yuancan at huawei.com>
>> ---
>> drivers/gpu/drm/panel/panel-simple.c | 9 +++------
>> 1 file changed, 3 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>> index 0cb3be26e2e6..1607824dc2b3 100644
>> --- a/drivers/gpu/drm/panel/panel-simple.c
>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>> @@ -575,12 +575,9 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
>>
>> panel->enable_gpio = devm_gpiod_get_optional(dev, "enable",
>> GPIOD_OUT_LOW);
>> - if (IS_ERR(panel->enable_gpio)) {
>> - err = PTR_ERR(panel->enable_gpio);
>> - if (err != -EPROBE_DEFER)
>> - dev_err(dev, "failed to request GPIO: %d\n", err);
>> - return err;
>> - }
>> + if (IS_ERR(panel->enable_gpio))
>> + return dev_err_probe(dev, PTR_ERR(panel->enable_gpio),
>> + "failed to request GPIO\n");
> Reviewed-by: Douglas Anderson <dianders at chromium.org>
>
> I'd be happy to land this patch and the panel-edp one into drm-misc
> just because I've touched those panel drivers in the past. I'd tend to
> leave the other panel drivers to others unless you really get stuck.
>
> For now I'll sit tight because I think you can make a 2nd fix to the
> panel-edp one and put them into the same patch.
Thanks for the notice, I will fix the case in panel_edp_probe in the v2
patch and
send it ASAP.
--
Best regards,
Yuan Can
More information about the dri-devel
mailing list