[PATCH 1/4] dt-bindings: display: Add bindings for JDI LPM102A188A

[Krzysztof Kozlowski]

On 29/09/2022 19:04, Diogo Ivo wrote:
> The LPM102A188A is a 10.2" 2560x1800 IPS panel found in
> the Google Pixel C.
> 


Thank you for your patch. There is something to discuss/improve.

> +  Each of the DSI channels controls a separate DSI peripheral. The peripheral
> +  driven by the first link (DSI-LINK1) is considered the primary peripheral
> +  and controls the device. The 'link2' property contains a phandle to the
> +  peripheral driven by the second link (DSI-LINK2).
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: jdi,lpm102a188a
> +
> +  reg: true
> +  enable-gpios: true
> +  reset-gpios: true
> +  power-supply: true
> +  backlight: true
> +
> +  ts-reset-gpios:
> +    maxItems: 1
> +    description: |
> +      Specifier for a GPIO connected to the touchscreen reset control signal.
> +      The reset signal is active low.

Isn't touchscreen a separate (input) device?

> +
> +  ddi-supply:
> +    description: The regulator that provides IOVCC (1.8V).
> +
> +  link2:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: |
> +      phandle to the DSI peripheral on the secondary link. Note that the
> +      presence of this property marks the containing node as DSI-LINK1.

Best regards,
Krzysztof