[PATCH v4 10/30] drm/connector: Add TV standard property

[Noralf Trønnes]

Den 29.09.2022 18.31, skrev Maxime Ripard:
> The TV mode property has been around for a while now to select and get the
> current TV mode output on an analog TV connector.
> 
> Despite that property name being generic, its content isn't and has been
> driver-specific which makes it hard to build any generic behaviour on top
> of it, both in kernel and user-space.
> 
> Let's create a new enum tv norm property, that can contain any of the
> analog TV standards currently supported by kernel drivers. Each driver can
> then pass in a bitmask of the modes it supports, and the property
> creation function will filter out the modes not supported.
> 
> We'll then be able to phase out the older tv mode property.
> 
> Signed-off-by: Maxime Ripard <maxime at cerno.tech>
> 
> ---
> Changes in v4:
> - Add property documentation to kms-properties.csv
> - Fix documentation
> ---
>  Documentation/gpu/kms-properties.csv |  1 +
>  drivers/gpu/drm/drm_atomic_uapi.c    |  4 +++
>  drivers/gpu/drm/drm_connector.c      | 57 +++++++++++++++++++++++++++++++-
>  include/drm/drm_connector.h          | 64 ++++++++++++++++++++++++++++++++++++
>  include/drm/drm_mode_config.h        |  8 +++++
>  5 files changed, 133 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/gpu/kms-properties.csv b/Documentation/gpu/kms-properties.csv
> index 45c12e3e82f4..3498bd5d5856 100644
> --- a/Documentation/gpu/kms-properties.csv
> +++ b/Documentation/gpu/kms-properties.csv
> @@ -91,6 +91,7 @@ omap,Generic,“zorder”,RANGE,"Min=0, Max=3","CRTC, Plane",TBD
>  qxl,Generic,"“hotplug_mode_update""",RANGE,"Min=0, Max=1",Connector,TBD
>  radeon,DVI-I,“coherent”,RANGE,"Min=0, Max=1",Connector,TBD
>  ,DAC enable load detect,“load detection”,RANGE,"Min=0, Max=1",Connector,TBD
> +,TV Mode,"""TV Mode""",ENUM,"{ ""NTSC"", ""NTSC-443"", ""NTSC-J"", ""PAL"", ""PAL-M"", ""PAL-N"", ""SECAM"" }",Connector,TBD
>  ,legacy TMDS PLL detect,"""tmds_pll""",ENUM,"{ ""driver"", ""bios"" }",-,TBD
>  ,Underscan,"""underscan""",ENUM,"{ ""off"", ""on"", ""auto"" }",Connector,TBD
>  ,,"""underscan hborder""",RANGE,"Min=0, Max=128",Connector,TBD

Turns out I was wrong about adding the property to this file, Daniel
says it's deprecated in f0f0657b108c ("drm/doc: Drop "content type" from
the legacy kms property table").

If you look at the Fixes commit it adds a kernel doc HDMI property
section and TV should probably have something like that.

Noralf.