[PATCH v1 3/6] dt-bindings: display: bridge: toshiba,tc358768: add parallel input mode

[Rob Herring]

On Fri, Mar 31, 2023 at 11:40:01AM +0200, Francesco Dolcini wrote:
> On Fri, Mar 31, 2023 at 10:48:15AM +0200, Krzysztof Kozlowski wrote:
> > On 30/03/2023 11:59, Francesco Dolcini wrote:
> > > From: Francesco Dolcini <francesco.dolcini at toradex.com>
> > > 
> > > Add new toshiba,input-rgb-mode property to describe the actual signal
> > > connection on the parallel RGB input interface.
> > > 
> > > Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
> > > ---
> > >  .../bindings/display/bridge/toshiba,tc358768.yaml | 15 +++++++++++++++
> > >  1 file changed, 15 insertions(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
> > > index 8f22093b61ae..2638121a2223 100644
> > > --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
> > > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
> > > @@ -42,6 +42,21 @@ properties:
> > >    clock-names:
> > >      const: refclk
> > >  
> > > +  toshiba,input-rgb-mode:
> > > +    description: |
> > > +      Parallel Input (RGB) Mode.
> > > +
> > > +      RGB inputs (PD[23:0]) color arrangement as documented in the datasheet
> > > +      and in the table below.
> > > +
> > > +      0 = R[7:0], G[7:0], B[7:0]
> > 
> > RGB888?
> 
> Or anything else - like a RGB666 - just connecting to GND the unused
> pins.

If the bridge is configured for RGB666, then that's fine. If not, the 
unused pins should be driven with either the MSB of each component. 
Otherwise, you'd can't fully saturate the colors.

> > > +      1 = R[1:0], G[1:0], B[1:0], R[7:2], G[7:2], B[7:2]
> > > +      2 = 8’b0, R[4:0], G[5:0], B[4:0]
> > 
> > Isn't this RGB565?
> > 
> > Don't we have already properties like this? e.g. colorspace?
> 
> It's not really the colorspace this property.
> 
> tc358768 is a parallel RGB to DSI bridge, it has 24 bit parallel input
> line.
> 
> The way this lines are connected is configurable with this parameter, if you
> look at mode 0 and 1 they all allow to have a RGB888 or a RGB666 or a
> RGB565 mapping. This just configure some internal mux, it's not strictly
> about the RGB mode.

This is the same as other cases. There's a need for describing the 
interface. It keeps coming up and I keep saying to go create something 
common.

Rob