[PATCH v2 2/2] drm/bridge: fsl-ldb: Add i.MX6SX support

[Marek Vasut]

On 3/30/23 12:42, Fabio Estevam wrote:
> From: Fabio Estevam <festevam at denx.de>
> 
> i.MX6SX has a single LVDS port and share a similar LDB_CTRL register layout
> with i.MX8MP and i.MX93.
> 
> There is no LVDS CTRL register on the i.MX6SX, so only write to
> this register on the appropriate SoCs.
> 
> Add support for the i.MX6SX LDB.
> 
> Tested on a imx6sx-sdb board with a Hannstar HSD100PXN1 LVDS panel
> and also on a custom i.MX6SX-based board.
> 
> Signed-off-by: Fabio Estevam <festevam at denx.de>
> ---
> Changes since v1:
> - None
> 
>   drivers/gpu/drm/bridge/fsl-ldb.c | 14 +++++++++++++-
>   1 file changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/bridge/fsl-ldb.c b/drivers/gpu/drm/bridge/fsl-ldb.c
> index 450b352914f4..f8e5d8ab98e3 100644
> --- a/drivers/gpu/drm/bridge/fsl-ldb.c
> +++ b/drivers/gpu/drm/bridge/fsl-ldb.c
> @@ -56,6 +56,7 @@
>   #define LVDS_CTRL_VBG_ADJ_MASK			GENMASK(19, 17)
>   
>   enum fsl_ldb_devtype {
> +	IMX6SX_LDB,
>   	IMX8MP_LDB,
>   	IMX93_LDB,
>   };
> @@ -64,9 +65,14 @@ struct fsl_ldb_devdata {
>   	u32 ldb_ctrl;
>   	u32 lvds_ctrl;
>   	bool lvds_en_bit;
> +	bool not_lvds_ctrl;

You might want to rename this one to something like 
"composite_control_reg" since the MX6SX only has one LDB control 
register instead of two like the newer SoCs. But that's optional change.

Reviewed-by: Marek Vasut <marex at denx.de>