[PATCH] drm/bridge: ti-sn65dsi83: Do not generate HFP/HBP/HSA and EOT packet

Laurent Pinchart laurent.pinchart at ideasonboard.com
Tue Apr 4 03:11:50 UTC 2023


Hi Marek,

Thank you for the patch.

On Mon, Apr 03, 2023 at 09:02:42PM +0200, Marek Vasut wrote:
> Do not generate the HS front and back porch gaps, the HSA gap and
> EOT packet, as per "SN65DSI83 datasheet SLLSEC1I - SEPTEMBER 2012
> - REVISED OCTOBER 2020", page 22, these packets are not required.
> This makes the TI SN65DSI83 bridge work with Samsung DSIM on i.MX8MN.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>

I have successfully used this driver with a Raspberry Pi CM4. The VC4
DSI driver does not seem to support the newly added flags, so this patch
shouldn't have any effect there.

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
> Cc: Andrzej Hajda <andrzej.hajda at intel.com>
> Cc: Daniel Vetter <daniel at ffwll.ch>
> Cc: David Airlie <airlied at gmail.com>
> Cc: Jagan Teki <jagan at amarulasolutions.com>
> Cc: Jernej Skrabec <jernej.skrabec at gmail.com>
> Cc: Jonas Karlman <jonas at kwiboo.se>
> Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
> Cc: Michael Walle <michael at walle.cc>
> Cc: Neil Armstrong <neil.armstrong at linaro.org>
> Cc: Robert Foss <rfoss at kernel.org>
> Cc: dri-devel at lists.freedesktop.org
> ---
>  drivers/gpu/drm/bridge/ti-sn65dsi83.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> index 91ecfbe45bf90..b60ae1dc1191d 100644
> --- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> @@ -642,7 +642,9 @@ static int sn65dsi83_host_attach(struct sn65dsi83 *ctx)
>  
>  	dsi->lanes = dsi_lanes;
>  	dsi->format = MIPI_DSI_FMT_RGB888;
> -	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST;
> +	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> +			  MIPI_DSI_MODE_VIDEO_NO_HFP | MIPI_DSI_MODE_VIDEO_NO_HBP |
> +			  MIPI_DSI_MODE_VIDEO_NO_HSA | MIPI_DSI_MODE_NO_EOT_PACKET;
>  
>  	ret = devm_mipi_dsi_attach(dev, dsi);
>  	if (ret < 0) {

-- 
Regards,

Laurent Pinchart


More information about the dri-devel mailing list