[PATCH v4 4/6] drm/msm/dsi: Use MSM and DRM DSC helper methods

Jessica Zhang quic_jesszhan at quicinc.com
Wed Apr 5 20:39:27 UTC 2023



On 4/5/2023 12:27 PM, Dmitry Baryshkov wrote:
> On 05/04/2023 03:41, Jessica Zhang wrote:
>> Use MSM and DRM DSC helper methods to configure DSC for DSI.
>>
>> Changes in V2:
>> - *_calculate_initial_scale_value --> *_set_initial_scale_value
>> - Split pkt_per_line and eol_byte_num changes to a separate patch
>> - Moved pclk_per_line calculation to hdisplay adjustment in `if (dsc)`
>>    block of dsi_update_dsc_timing()
>>
>> Changes in v3:
>> - Split pclk_per_intf calculation into a separate patch
>> - Added slice_width check to dsi_timing_setup
>> - Used MSM DSC helper to calculate total_bytes_per_intf
>>
>> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
>> ---
>>   drivers/gpu/drm/msm/dsi/dsi_host.c | 13 ++++++++++---
>>   1 file changed, 10 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c 
>> b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> index 74d38f90398a..6a6218a9655f 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> @@ -28,6 +28,7 @@
>>   #include "dsi.xml.h"
>>   #include "sfpb.xml.h"
>>   #include "dsi_cfg.h"
>> +#include "msm_dsc_helper.h"
>>   #include "msm_kms.h"
>>   #include "msm_gem.h"
>>   #include "phy/dsi_phy.h"
>> @@ -848,7 +849,7 @@ static void dsi_update_dsc_timing(struct 
>> msm_dsi_host *msm_host, bool is_cmd_mod
>>       /* first calculate dsc parameters and then program
>>        * compress mode registers
>>        */
>> -    slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->slice_width);
>> +    slice_per_intf = msm_dsc_get_slice_per_intf(dsc, hdisplay);
>>       /*
>>        * If slice_count is greater than slice_per_intf
>> @@ -858,7 +859,7 @@ static void dsi_update_dsc_timing(struct 
>> msm_dsi_host *msm_host, bool is_cmd_mod
>>       if (dsc->slice_count > slice_per_intf)
>>           dsc->slice_count = 1;
>> -    total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf;
>> +    total_bytes_per_intf = msm_dsc_get_bytes_per_intf(dsc, hdisplay);
>>       eol_byte_num = total_bytes_per_intf % 3;
>>       pkt_per_line = slice_per_intf / dsc->slice_count;
>> @@ -936,6 +937,12 @@ static void dsi_timing_setup(struct msm_dsi_host 
>> *msm_host, bool is_bonded_dsi)
>>               return;
>>           }
>> +        if (!dsc->slice_width || (mode->hdisplay < dsc->slice_width)) {
>> +            pr_err("DSI: invalid slice width %d (pic_width: %d)\n",
>> +                   dsc->slice_width, mode->hdisplay);
>> +            return;
>> +        }
> 
> This is not the "use of MSM and DRM DSC helper methods" and thus should 
> be moved to a separate patch.

Hi Dmitry,

Acked.

Thanks,

Jessica Zhang

> 
>> +
>>           dsc->pic_width = mode->hdisplay;
>>           dsc->pic_height = mode->vdisplay;
>>           DBG("Mode %dx%d\n", dsc->pic_width, dsc->pic_height);
>> @@ -1759,7 +1766,7 @@ static int dsi_populate_dsc_params(struct 
>> msm_dsi_host *msm_host, struct drm_dsc
>>           return ret;
>>       }
>> -    dsc->initial_scale_value = 32;
>> +    drm_dsc_set_initial_scale_value(dsc);
>>       dsc->line_buf_depth = dsc->bits_per_component + 1;
>>       return drm_dsc_compute_rc_parameters(dsc);
>>
> 
> -- 
> With best wishes
> Dmitry
> 


More information about the dri-devel mailing list