[Intel-gfx] [PATCH 2/3] drm/i915/guc: Disable PL1 power limit when loading GuC firmware
Rodrigo Vivi
rodrigo.vivi at intel.com
Fri Apr 7 11:08:31 UTC 2023
On Wed, Apr 05, 2023 at 09:45:21PM -0700, Ashutosh Dixit wrote:
> On dGfx, the PL1 power limit being enabled and set to a low value results
> in a low GPU operating freq. It also negates the freq raise operation which
> is done before GuC firmware load. As a result GuC firmware load can time
> out. Such timeouts were seen in the GL #8062 bug below (where the PL1 power
> limit was enabled and set to a low value). Therefore disable the PL1 power
> limit when allowed by HW when loading GuC firmware.
>
> v2:
> - Take mutex (to disallow writes to power1_max) across GuC reset/fw load
> - Add hwm_power_max_restore to error return code path
>
> v3 (Jani N):
> - Add/remove explanatory comments
> - Function renames
> - Type corrections
> - Locking annotation
>
> v4:
> - Don't hold the lock across GuC reset (Rodrigo)
> - New locking scheme (suggested by Rodrigo)
> - Eliminate rpm_get in power_max_disable/restore, not needed (Tvrtko)
>
> Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8062
> Signed-off-by: Ashutosh Dixit <ashutosh.dixit at intel.com>
> ---
> drivers/gpu/drm/i915/gt/uc/intel_uc.c | 9 ++++++
> drivers/gpu/drm/i915/i915_hwmon.c | 40 +++++++++++++++++++++++++++
> drivers/gpu/drm/i915/i915_hwmon.h | 7 +++++
> 3 files changed, 56 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/gt/uc/intel_uc.c b/drivers/gpu/drm/i915/gt/uc/intel_uc.c
> index 4ccb4be4c9cba..aa8e35a5636a0 100644
> --- a/drivers/gpu/drm/i915/gt/uc/intel_uc.c
> +++ b/drivers/gpu/drm/i915/gt/uc/intel_uc.c
> @@ -18,6 +18,7 @@
> #include "intel_uc.h"
>
> #include "i915_drv.h"
> +#include "i915_hwmon.h"
>
> static const struct intel_uc_ops uc_ops_off;
> static const struct intel_uc_ops uc_ops_on;
> @@ -461,6 +462,7 @@ static int __uc_init_hw(struct intel_uc *uc)
> struct intel_guc *guc = &uc->guc;
> struct intel_huc *huc = &uc->huc;
> int ret, attempts;
> + bool pl1en;
we need to initialize this to make warn free builds happy...
what's our default btw? false? true? we need to read it back?
>
> GEM_BUG_ON(!intel_uc_supports_guc(uc));
> GEM_BUG_ON(!intel_uc_wants_guc(uc));
> @@ -491,6 +493,9 @@ static int __uc_init_hw(struct intel_uc *uc)
> else
> attempts = 1;
>
> + /* Disable a potentially low PL1 power limit to allow freq to be raised */
> + i915_hwmon_power_max_disable(gt->i915, &pl1en);
> +
> intel_rps_raise_unslice(&uc_to_gt(uc)->rps);
>
> while (attempts--) {
> @@ -547,6 +552,8 @@ static int __uc_init_hw(struct intel_uc *uc)
> intel_rps_lower_unslice(&uc_to_gt(uc)->rps);
> }
>
> + i915_hwmon_power_max_restore(gt->i915, pl1en);
> +
> guc_info(guc, "submission %s\n", str_enabled_disabled(intel_uc_uses_guc_submission(uc)));
> guc_info(guc, "SLPC %s\n", str_enabled_disabled(intel_uc_uses_guc_slpc(uc)));
>
> @@ -563,6 +570,8 @@ static int __uc_init_hw(struct intel_uc *uc)
> /* Return GT back to RPn */
> intel_rps_lower_unslice(&uc_to_gt(uc)->rps);
>
> + i915_hwmon_power_max_restore(gt->i915, pl1en);
> +
> __uc_sanitize(uc);
>
> if (!ret) {
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
> index 7f44e809ca155..9ab8971679fe3 100644
> --- a/drivers/gpu/drm/i915/i915_hwmon.c
> +++ b/drivers/gpu/drm/i915/i915_hwmon.c
> @@ -50,6 +50,7 @@ struct hwm_drvdata {
> struct hwm_energy_info ei; /* Energy info for energy1_input */
> char name[12];
> int gt_n;
> + bool reset_in_progress;
> };
>
> struct i915_hwmon {
> @@ -400,6 +401,10 @@ hwm_power_max_write(struct hwm_drvdata *ddat, long val)
> u32 nval;
>
> mutex_lock(&hwmon->hwmon_lock);
> + if (hwmon->ddat.reset_in_progress) {
> + ret = -EAGAIN;
> + goto unlock;
> + }
> wakeref = intel_runtime_pm_get(ddat->uncore->rpm);
>
> /* Disable PL1 limit and verify, because the limit cannot be disabled on all platforms */
> @@ -421,6 +426,7 @@ hwm_power_max_write(struct hwm_drvdata *ddat, long val)
> PKG_PWR_LIM_1_EN | PKG_PWR_LIM_1, nval);
> exit:
> intel_runtime_pm_put(ddat->uncore->rpm, wakeref);
> +unlock:
> mutex_unlock(&hwmon->hwmon_lock);
> return ret;
> }
> @@ -472,6 +478,40 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
> }
> }
>
> +void i915_hwmon_power_max_disable(struct drm_i915_private *i915, bool *old)
> +{
> + struct i915_hwmon *hwmon = i915->hwmon;
> + u32 r;
> +
> + if (!hwmon || !i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit))
> + return;
> +
> + mutex_lock(&hwmon->hwmon_lock);
> +
> + hwmon->ddat.reset_in_progress = true;
> + r = intel_uncore_rmw(hwmon->ddat.uncore, hwmon->rg.pkg_rapl_limit,
> + PKG_PWR_LIM_1_EN, 0);
> + *old = !!(r & PKG_PWR_LIM_1_EN);
> +
> + mutex_unlock(&hwmon->hwmon_lock);
> +}
> +
> +void i915_hwmon_power_max_restore(struct drm_i915_private *i915, bool old)
> +{
> + struct i915_hwmon *hwmon = i915->hwmon;
> +
> + if (!hwmon || !i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit))
> + return;
> +
> + mutex_lock(&hwmon->hwmon_lock);
> +
> + intel_uncore_rmw(hwmon->ddat.uncore, hwmon->rg.pkg_rapl_limit,
> + PKG_PWR_LIM_1_EN, old ? PKG_PWR_LIM_1_EN : 0);
> + hwmon->ddat.reset_in_progress = false;
> +
> + mutex_unlock(&hwmon->hwmon_lock);
> +}
you could have combined both functions in a
i915_hwmon_power_max_set(struct drm_i915_private *i915, bool val, bool *old)
then pass NULL to old on the restoration times
and have
if (old)
*old = !!(r & PKG_PWR_LIM_1_EN);
But really up to you here, the current code is clear to follow imho
so, with the pl1en initialization fixed:
Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> +
> static umode_t
> hwm_energy_is_visible(const struct hwm_drvdata *ddat, u32 attr)
> {
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.h b/drivers/gpu/drm/i915/i915_hwmon.h
> index 7ca9cf2c34c96..0fcb7de844061 100644
> --- a/drivers/gpu/drm/i915/i915_hwmon.h
> +++ b/drivers/gpu/drm/i915/i915_hwmon.h
> @@ -7,14 +7,21 @@
> #ifndef __I915_HWMON_H__
> #define __I915_HWMON_H__
>
> +#include <linux/types.h>
> +
> struct drm_i915_private;
> +struct intel_gt;
>
> #if IS_REACHABLE(CONFIG_HWMON)
> void i915_hwmon_register(struct drm_i915_private *i915);
> void i915_hwmon_unregister(struct drm_i915_private *i915);
> +void i915_hwmon_power_max_disable(struct drm_i915_private *i915, bool *old);
> +void i915_hwmon_power_max_restore(struct drm_i915_private *i915, bool old);
> #else
> static inline void i915_hwmon_register(struct drm_i915_private *i915) { };
> static inline void i915_hwmon_unregister(struct drm_i915_private *i915) { };
> +static inline void i915_hwmon_power_max_disable(struct drm_i915_private *i915, bool *old) { };
> +static inline void i915_hwmon_power_max_restore(struct drm_i915_private *i915, bool old) { };
> #endif
>
> #endif /* __I915_HWMON_H__ */
> --
> 2.38.0
>
More information about the dri-devel
mailing list