[PATCH] drm/msm/dpu: always program dsc active bits

[Kuogee Hsieh]

In current code, the dsc active bits are set only if the cfg->dsc is set.
However, for displays which are hot-pluggable, there can be a use-case
of disconnecting a DSC supported sink and connecting a non-DSC sink.

For those cases we need to clear DSC active bits during teardown.

Fixes: ede3c6bb00c ("drm/msm/disp/dpu1: Add DSC support in hw_ctl")
Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index bbdc95c..88e4efe 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -541,10 +541,9 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
 	if (cfg->merge_3d)
 		DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
 			      BIT(cfg->merge_3d - MERGE_3D_0));
-	if (cfg->dsc) {
-		DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, DSC_IDX);
-		DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
-	}
+
+	DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, DSC_IDX);
+	DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
 }
 
 static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project