[PATCH 1/2] phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc

[Guillaume Ranquet]

The ret variable in mtk_hdmi_pll_calc() was used unitialized as reported
by the kernel test robot.

Fix the issue by removing the variable altogether and testing out the
return value of mtk_hdmi_pll_set_hw()

Fixes: 45810d486bb44 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
Reported-by: kernel test robot <lkp at intel.com>
Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
---
 drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
index abfc077fb0a8..e10da6c4147e 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
@@ -213,7 +213,7 @@ static int mtk_hdmi_pll_calc(struct mtk_hdmi_phy *hdmi_phy, struct clk_hw *hw,
 	u64 tmds_clk, pixel_clk, da_hdmitx21_ref_ck, ns_hdmipll_ck, pcw;
 	u8 txpredivs[4] = { 2, 4, 6, 12 };
 	u32 fbkdiv_low;
-	int i, ret;
+	int i;
 
 	pixel_clk = rate;
 	tmds_clk = pixel_clk;
@@ -292,10 +292,9 @@ static int mtk_hdmi_pll_calc(struct mtk_hdmi_phy *hdmi_phy, struct clk_hw *hw,
 	if (!(digital_div <= 32 && digital_div >= 1))
 		return -EINVAL;
 
-	mtk_hdmi_pll_set_hw(hw, PLL_PREDIV, fbkdiv_high, fbkdiv_low,
+	if (mtk_hdmi_pll_set_hw(hw, PLL_PREDIV, fbkdiv_high, fbkdiv_low,
 			    PLL_FBKDIV_HS3, posdiv1, posdiv2, txprediv,
-			    txposdiv, digital_div);
-	if (ret)
+			    txposdiv, digital_div))
 		return -EINVAL;
 
 	return 0;

-- 
2.39.2