[PATCH v2 11/17] drm/msm/dpu: Disable MDP vsync source selection on DPU 5.0.0 and above
Konrad Dybcio
konrad.dybcio at linaro.org
Thu Apr 20 01:01:28 UTC 2023
On 20.04.2023 03:00, Dmitry Baryshkov wrote:
> On 17/04/2023 23:21, Marijn Suijten wrote:
>> Since hardware revision 5.0.0 the TE configuration moved out of the
>> PINGPONG block into the INTF block, including vsync source selection
>> that was previously part of MDP top. Writing to the MDP_VSYNC_SEL
>> register has no effect anymore and is omitted downstream via the
>> DPU/SDE_MDP_VSYNC_SEL feature flag. This flag is only added to INTF
>> blocks used by hardware prior to 5.0.0.
>>
>> The code that writes to these registers in the INTF block will follow in
>> subsequent patches.
>>
>> Signed-off-by: Marijn Suijten <marijn.suijten at somainline.org>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>> ---
>> .../drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h | 2 +-
>> .../gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h | 2 +-
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 3 ++
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c | 52 +++++++++++++++-------
>> 4 files changed, 41 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
>> index b7845591c384..6906f8046b9e 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
>> @@ -30,7 +30,7 @@ static const struct dpu_mdp_cfg msm8998_mdp[] = {
>> {
>> .name = "top_0", .id = MDP_TOP,
>> .base = 0x0, .len = 0x458,
>> - .features = 0,
>> + .features = BIT(DPU_MDP_VSYNC_SEL),
>> .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
>> .clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
>> .clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0 },
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
>> index 5b9b3b99f1b5..14ce397800d5 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_0_sdm845.h
>> @@ -30,7 +30,7 @@ static const struct dpu_mdp_cfg sdm845_mdp[] = {
>> {
>> .name = "top_0", .id = MDP_TOP,
>> .base = 0x0, .len = 0x45c,
>> - .features = BIT(DPU_MDP_AUDIO_SELECT),
>> + .features = BIT(DPU_MDP_AUDIO_SELECT) | BIT(DPU_MDP_VSYNC_SEL),
>> .clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
>> .clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
>> .clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0 },
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> index 71584cd56fd7..599e177b89dd 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> @@ -48,6 +48,8 @@ enum {
>> * @DPU_MDP_UBWC_1_5, Universal Bandwidth compression version 1.5
>> * @DPU_MDP_PERIPH_0_REMOVED Indicates that access to periph top0 block results
>> * in a failure
>> + * @DPU_MDP_VSYNC_SEL Enables vsync source selection via MDP_VSYNC_SEL register
>> + * (moved into INTF block since DPU 5.0.0)
>> * @DPU_MDP_MAX Maximum value
>> */
>> @@ -59,6 +61,7 @@ enum {
>> DPU_MDP_UBWC_1_5,
>> DPU_MDP_AUDIO_SELECT,
>> DPU_MDP_PERIPH_0_REMOVED,
>> + DPU_MDP_VSYNC_SEL,
>> DPU_MDP_MAX
>> };
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>> index 2bb02e17ee52..9ea15a647a66 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
>> @@ -126,28 +126,16 @@ static void dpu_hw_get_danger_status(struct dpu_hw_mdp *mdp,
>> status->sspp[SSPP_CURSOR1] = (value >> 26) & 0x3;
>> }
>> -static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>> +static void dpu_hw_setup_vsync_source_v1(struct dpu_hw_mdp *mdp,
>> struct dpu_vsync_source_cfg *cfg)
>
> In my opinion _v1 is not really descriptive here. Could you please rename it to dpu_hw_setup_vsync_source_no_vsync_sel() ?
v1 refers to the CTL rev 100 a.k.a 1.0.0 a.k.a 1, but that's not
yet very well formulated upstream.. if we even need it..
Konrad
>
> Or maybe rename dpu_hw_setup_vsync_source() to dpu_hw_setup_vsync_source_vsync_sel() and drop _v1 from this function.
>
> Up to you.
>
>
>> {
>> struct dpu_hw_blk_reg_map *c;
>> - u32 reg, wd_load_value, wd_ctl, wd_ctl2, i;
>> - static const u32 pp_offset[PINGPONG_MAX] = {0xC, 0x8, 0x4, 0x13, 0x18};
>> + u32 reg, wd_load_value, wd_ctl, wd_ctl2;
>> - if (!mdp || !cfg || (cfg->pp_count > ARRAY_SIZE(cfg->ppnumber)))
>> + if (!mdp || !cfg)
>> return;
>> c = &mdp->hw;
>> - reg = DPU_REG_READ(c, MDP_VSYNC_SEL);
>> - for (i = 0; i < cfg->pp_count; i++) {
>> - int pp_idx = cfg->ppnumber[i] - PINGPONG_0;
>> -
>> - if (pp_idx >= ARRAY_SIZE(pp_offset))
>> - continue;
>> -
>> - reg &= ~(0xf << pp_offset[pp_idx]);
>> - reg |= (cfg->vsync_source & 0xf) << pp_offset[pp_idx];
>> - }
>> - DPU_REG_WRITE(c, MDP_VSYNC_SEL, reg);
>> if (cfg->vsync_source >= DPU_VSYNC_SOURCE_WD_TIMER_4 &&
>> cfg->vsync_source <= DPU_VSYNC_SOURCE_WD_TIMER_0) {
>> @@ -194,6 +182,33 @@ static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>> }
>> }
>> +static void dpu_hw_setup_vsync_source(struct dpu_hw_mdp *mdp,
>> + struct dpu_vsync_source_cfg *cfg)
>> +{
>> + struct dpu_hw_blk_reg_map *c;
>> + u32 reg, i;
>> + static const u32 pp_offset[PINGPONG_MAX] = {0xC, 0x8, 0x4, 0x13, 0x18};
>> +
>> + if (!mdp || !cfg || (cfg->pp_count > ARRAY_SIZE(cfg->ppnumber)))
>> + return;
>> +
>> + c = &mdp->hw;
>> +
>> + reg = DPU_REG_READ(c, MDP_VSYNC_SEL);
>> + for (i = 0; i < cfg->pp_count; i++) {
>> + int pp_idx = cfg->ppnumber[i] - PINGPONG_0;
>> +
>> + if (pp_idx >= ARRAY_SIZE(pp_offset))
>> + continue;
>> +
>> + reg &= ~(0xf << pp_offset[pp_idx]);
>> + reg |= (cfg->vsync_source & 0xf) << pp_offset[pp_idx];
>> + }
>> + DPU_REG_WRITE(c, MDP_VSYNC_SEL, reg);
>> +
>> + dpu_hw_setup_vsync_source_v1(mdp, cfg);
>> +}
>> +
>> static void dpu_hw_get_safe_status(struct dpu_hw_mdp *mdp,
>> struct dpu_danger_safe_status *status)
>> {
>> @@ -241,7 +256,12 @@ static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
>> ops->setup_split_pipe = dpu_hw_setup_split_pipe;
>> ops->setup_clk_force_ctrl = dpu_hw_setup_clk_force_ctrl;
>> ops->get_danger_status = dpu_hw_get_danger_status;
>> - ops->setup_vsync_source = dpu_hw_setup_vsync_source;
>> +
>> + if (cap & BIT(DPU_MDP_VSYNC_SEL))
>> + ops->setup_vsync_source = dpu_hw_setup_vsync_source;
>> + else
>> + ops->setup_vsync_source = dpu_hw_setup_vsync_source_v1;
>> +
>> ops->get_safe_status = dpu_hw_get_safe_status;
>> if (cap & BIT(DPU_MDP_AUDIO_SELECT))
>>
>
More information about the dri-devel
mailing list