[PATCH v2 14/17] drm/msm/dpu: Document and enable TEAR interrupts on DSI interfaces

[Dmitry Baryshkov]

On 17/04/2023 23:21, Marijn Suijten wrote:
> All SoCs since DPU 5.0.0 have the tear interrupt registers moved out of
> the PINGPONG block and into the INTF block.  Wire up these interrupts
> and IRQ masks on all supported hardware.
> 
> Signed-off-by: Marijn Suijten <marijn.suijten at somainline.org>
> ---
>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_5_0_sm8150.h | 12 ++++++----
>   .../drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h    | 12 ++++++----
>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_6_0_sm8250.h | 12 ++++++----
>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_6_2_sc7180.h |  8 ++++---
>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_6_3_sm6115.h |  8 ++++---
>   .../drm/msm/disp/dpu1/catalog/dpu_6_5_qcm2290.h    |  8 ++++---
>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h | 12 ++++++----
>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h |  6 +++--
>   .../drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h   | 12 ++++++----
>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h | 12 ++++++----
>   .../gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h | 12 ++++++----
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     | 15 ++++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |  6 +++--
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c  | 27 ++++++++++++++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h  |  4 ++++
>   15 files changed, 125 insertions(+), 41 deletions(-)

If there is v3 for some reason, please split this into two patches: 
core/interrups and SoC catalog changes.

-- 
With best wishes
Dmitry