[PATCH v2 2/3] vkms: Add support for multiple pipes
Maíra Canal
mcanal at igalia.com
Thu Apr 20 16:47:59 UTC 2023
Hi Marius,
Thanks for the changing the commit message! Just a few nits:
On 4/20/23 05:41, Marius Vlad wrote:
> This adds support for creating multiple virtual pipes, in case one would
> need to display multiple independent things on different outputs.
>
> We use a module parameter to specify how many to create, defaulting to
> just one with the possibility of specifying a maximum of 4 possible pipes.
>
> This is of particular importance when testing out the DRM back-end in
> compositors, but also to be able to independently set different DPMS states.
When I run the VKMS CI, I'm getting the following warning in most tests
with max_pipes=3:
(kms_atomic:2085) igt_kms-WARNING: Output Virtual-2 could not be assigned to a pipe
(kms_atomic:2085) igt_kms-WARNING: Output Virtual-3 could not be assigned to a pipe
>
> Signed-off-by: Marius Vlad <marius.vlad at collabora.com>
> ---
> drivers/gpu/drm/vkms/vkms_crtc.c | 3 +--
> drivers/gpu/drm/vkms/vkms_drv.c | 27 ++++++++++++++++++++++-----
> drivers/gpu/drm/vkms/vkms_drv.h | 11 ++++++++---
> drivers/gpu/drm/vkms/vkms_output.c | 5 ++---
> drivers/gpu/drm/vkms/vkms_writeback.c | 24 ++++++++++++------------
> 5 files changed, 45 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
> index 57bbd32e9beb..0b6c40ac80b6 100644
> --- a/drivers/gpu/drm/vkms/vkms_crtc.c
> +++ b/drivers/gpu/drm/vkms/vkms_crtc.c
> @@ -89,8 +89,7 @@ static bool vkms_get_vblank_timestamp(struct drm_crtc *crtc,
> {
> struct drm_device *dev = crtc->dev;
> unsigned int pipe = crtc->index;
> - struct vkms_device *vkmsdev = drm_device_to_vkms_device(dev);
> - struct vkms_output *output = &vkmsdev->output;
> + struct vkms_output *output = drm_crtc_to_vkms_output(crtc);
> struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
>
> if (!READ_ONCE(vblank->enabled)) {
> diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
> index 6d3a2d57d992..63091ce6735a 100644
> --- a/drivers/gpu/drm/vkms/vkms_drv.c
> +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> @@ -51,14 +51,19 @@ static bool enable_overlay;
> module_param_named(enable_overlay, enable_overlay, bool, 0444);
> MODULE_PARM_DESC(enable_overlay, "Enable/Disable overlay support");
>
> +static int max_pipes = 1;
I believe this should be unsigned int, otherwise if you configure
max_pipes=-3, you will get an error like:
[ 31.015005] ------------[ cut here ]------------
[ 31.015011] WARNING: CPU: 0 PID: 1062 at mm/page_alloc.c:5568 __alloc_pages+0x65/0x300
[ 31.015021] Modules linked in: vkms(+) [last unloaded: vkms]
[ 31.015030] CPU: 0 PID: 1062 Comm: modprobe Not tainted 6.3.0-rc4-01502-g91c249b2b9f6-dirty #92
[ 31.015035] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
[ 31.015038] RIP: 0010:__alloc_pages+0x65/0x300
[ 31.015043] Code: 00 f7 c7 00 20 00 00 75 0e 83 fe 0b 72 09 f6 05 16 02 c3 01 01 74 0c 83 fe 0a 76 15 31 ed e9 51 01 00 00 c6 05 01 02 c3 01 01 <0f> 0b 83 fe 0a 77 eb 23 1d f6 05 c5 01 65 48 8b 3d 26 77 fd 71 8b
[ 31.015047] RSP: 0018:ffffa95442247880 EFLAGS: 00010246
[ 31.015052] RAX: 0bb151d28a828b00 RBX: 0000000000040dc0 RCX: 0000000000000000
[ 31.015055] RDX: 0000000000000000 RSI: 000000000000001d RDI: 0000000000040dc0
[ 31.015059] RBP: 0000000000000000 R08: ffffffff8f6cbeac R09: 0000000000000010
[ 31.015061] R10: ffff9cb282c6a500 R11: 0000000400000001 R12: 0000000000000dc0
[ 31.015065] R13: ffffffffc01e3258 R14: 0000000000000000 R15: 000000000000001d
[ 31.015067] FS: 00007f95f41b6740(0000) GS:ffff9cb2bbc00000(0000) knlGS:0000000000000000
[ 31.015071] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 31.015075] CR2: 00007ffc3933cec8 CR3: 000000011c110000 CR4: 00000000000006f0
[ 31.015082] Call Trace:
[ 31.015102] <TASK>
[ 31.015106] __kmalloc_large_node+0x82/0x120
[ 31.015113] ? drm_vblank_init+0x30/0x100
[ 31.015120] __kmalloc_node_track_caller+0xc4/0x180
[ 31.015125] ? __kmalloc_node_track_caller+0x8f/0x180
[ 31.015128] ? preempt_count_add+0x5e/0xa0
[ 31.015134] drmm_kmalloc+0x31/0x110
[ 31.015140] drm_vblank_init+0x30/0x100
[ 31.015145] init_module+0x179/0xff0 [vkms]
[ 31.015160] ? __pfx_init_module+0x10/0x10 [vkms]
[ 31.015171] do_one_initcall+0x10c/0x2d0
[ 31.015180] ? do_init_module+0x1d/0x1c0
[ 31.015187] do_init_module+0x45/0x1c0
[ 31.015192] load_module+0x16eb/0x1970
[ 31.015198] ? kernel_read_file_from_fd+0x5a/0x90
[ 31.015205] __se_sys_finit_module+0xb3/0xf0
[ 31.015212] do_syscall_64+0x43/0x90
[ 31.015218] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 31.015224] RIP: 0033:0x7f95f42bf6bd
[ 31.015228] Code: 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 43 d7 0c 00 f7 d8 64 89 01 48
[ 31.015232] RSP: 002b:00007ffc3933ef08 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 31.015236] RAX: ffffffffffffffda RBX: 000055ec9b730a10 RCX: 00007f95f42bf6bd
[ 31.015239] RDX: 0000000000000000 RSI: 000055ec9b730470 RDI: 0000000000000003
[ 31.015241] RBP: 000055ec9b730470 R08: 0000000000000000 R09: 00007ffc3933f030
[ 31.015243] R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000040000
[ 31.015245] R13: 000055ec9b730ab0 R14: 0000000000000000 R15: 000055ec9b730c70
[ 31.015248] </TASK>
[ 31.015250] ---[ end trace 0000000000000000 ]---
[ 31.015253] [drm:init_module [vkms]] *ERROR* Failed to vblank
Also, when I setted max_pipes=4, I'm getting the following error:
[ 74.804396] ------------[ cut here ]------------
[ 74.804402] WARNING: CPU: 2 PID: 1587 at drivers/gpu/drm/drm_plane.c:252 __drm_universal_plane_init+0x4fe/0x550
[ 74.804415] Modules linked in: vkms(+)
[ 74.804421] CPU: 2 PID: 1587 Comm: modprobe Tainted: G W 6.3.0-rc4-01502-g91c249b2b9f6-dirty #92
[ 74.804426] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
[ 74.804429] RIP: 0010:__drm_universal_plane_init+0x4fe/0x550
[ 74.804434] Code: c4 20 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 49 8b b6 90 05 00 00 48 8b 44 24 08 8b 10 48 8b 3c 24 e8 84 b8 ff ff eb d1 <0f> 0b 41 bc ea ff ff ff eb c7 0f 0b 41 bc ea ff ff ff eb bd 49 8b
[ 74.804438] RSP: 0018:ffffb2cc8217f858 EFLAGS: 00010246
[ 74.804453] RAX: 0000000000000000 RBX: ffffffffc0223318 RCX: ffffffffc0223318
[ 74.804456] RDX: 0000000000000008 RSI: ffffa24080913028 RDI: ffffa24098d20000
[ 74.804458] RBP: ffffb2cc8217f970 R08: ffffffffc0223300 R09: 0000000000000005
[ 74.804461] R10: ffffb2cc8217f910 R11: 0000000000000000 R12: 0000000000000008
[ 74.804463] R13: ffffa24080913028 R14: ffffa24080913028 R15: ffffa24098d20000
[ 74.804465] FS: 00007fbd9fc9b740(0000) GS:ffffa240bbd00000(0000) knlGS:0000000000000000
[ 74.804469] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 74.804471] CR2: 00007f74a59d1f30 CR3: 0000000103304000 CR4: 00000000000006e0
[ 74.804479] Call Trace:
[ 74.804483] <TASK>
[ 74.804485] ? preempt_count_add+0x5e/0xa0
[ 74.804492] __drmm_universal_plane_alloc+0xce/0x140
[ 74.804497] ? __drm_connector_init+0x3d6/0x4c0
[ 74.804502] vkms_plane_init+0x4d/0x70 [vkms]
[ 74.804516] vkms_output_init+0xa7/0x380 [vkms]
[ 74.804527] init_module+0x25d/0xff0 [vkms]
[ 74.804538] ? __pfx_init_module+0x10/0x10 [vkms]
[ 74.804548] do_one_initcall+0x10c/0x2d0
[ 74.804557] ? do_init_module+0x1d/0x1c0
[ 74.804564] do_init_module+0x45/0x1c0
[ 74.804569] load_module+0x16eb/0x1970
[ 74.804575] ? kernel_read_file_from_fd+0x5a/0x90
[ 74.804615] __se_sys_finit_module+0xb3/0xf0
[ 74.804624] do_syscall_64+0x43/0x90
[ 74.804632] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 74.804640] RIP: 0033:0x7fbd9fda46bd
[ 74.804645] Code: 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 43 d7 0c 00 f7 d8 64 89 01 48
[ 74.804649] RSP: 002b:00007ffd8cdc6d58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 74.804655] RAX: ffffffffffffffda RBX: 00005614c1f3ea10 RCX: 00007fbd9fda46bd
[ 74.804659] RDX: 0000000000000000 RSI: 00005614c1f3e470 RDI: 0000000000000003
[ 74.804662] RBP: 00005614c1f3e470 R08: 0000000000000000 R09: 00007ffd8cdc6e80
[ 74.804665] R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000040000
[ 74.804668] R13: 00005614c1f3eab0 R14: 0000000000000000 R15: 00005614c1f3ec70
[ 74.804673] </TASK>
[ 74.804675] ---[ end trace 0000000000000000 ]---
[ 74.804736] BUG: kernel NULL pointer dereference, address: 00000000000000a8
[ 74.806126] #PF: supervisor read access in kernel mode
[ 74.806590] #PF: error_code(0x0000) - not-present page
[ 74.807160] PGD 0 P4D 0
[ 74.807463] Oops: 0000 [#1] PREEMPT SMP PTI
[ 74.807874] CPU: 2 PID: 1587 Comm: modprobe Tainted: G W 6.3.0-rc4-01502-g91c249b2b9f6-dirty #92
[ 74.808597] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
[ 74.809097] RIP: 0010:destroy_workqueue+0xf/0x2f0
[ 74.809397] Code: 41 5e 41 5f 5d e9 b1 24 ff 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 55 41 57 41 56 41 54 53 48 83 ec 10 49 89 ff <48> 8b bf a8 00 00 00 48 85 ff 74 14 49 c7 87 a8 00 00 00 00 00 00
[ 74.810308] RSP: 0018:ffffb2cc8217f928 EFLAGS: 00010286
[ 74.810637] RAX: 0000000000000004 RBX: 0000000000000003 RCX: 0000000000000001
[ 74.811041] RDX: 0000000000000002 RSI: 0000000000000082 RDI: 0000000000000000
[ 74.811436] RBP: ffffa23f9df001c0 R08: 0000000000b90826 R09: 000003fffffffc00
[ 74.811857] R10: 000000000000015d R11: 0000000000000000 R12: 0000000000000282
[ 74.812256] R13: 0000000000000001 R14: ffffa24098d20000 R15: 0000000000000000
[ 74.812673] FS: 00007fbd9fc9b740(0000) GS:ffffa240bbd00000(0000) knlGS:0000000000000000
[ 74.813294] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 74.814296] CR2: 00000000000000a8 CR3: 0000000103304000 CR4: 00000000000006e0
[ 74.814824] Call Trace:
[ 74.815114] <TASK>
[ 74.815388] ? _raw_spin_unlock_irq+0xe/0x30
[ 74.815806] vkms_release+0x26/0x50 [vkms]
[ 74.816187] devm_drm_dev_init_release+0x2d/0x60
[ 74.816590] devres_release_group+0xeb/0x140
[ 74.817005] init_module+0x196/0xff0 [vkms]
[ 74.817394] ? __pfx_init_module+0x10/0x10 [vkms]
[ 74.817833] do_one_initcall+0x10c/0x2d0
[ 74.818208] ? do_init_module+0x1d/0x1c0
[ 74.818587] do_init_module+0x45/0x1c0
[ 74.818869] load_module+0x16eb/0x1970
[ 74.819147] ? kernel_read_file_from_fd+0x5a/0x90
[ 74.819458] __se_sys_finit_module+0xb3/0xf0
[ 74.819786] do_syscall_64+0x43/0x90
[ 74.820041] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 74.821852] RIP: 0033:0x7fbd9fda46bd
[ 74.822118] Code: 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 43 d7 0c 00 f7 d8 64 89 01 48
[ 74.822902] RSP: 002b:00007ffd8cdc6d58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 74.823311] RAX: ffffffffffffffda RBX: 00005614c1f3ea10 RCX: 00007fbd9fda46bd
[ 74.823648] RDX: 0000000000000000 RSI: 00005614c1f3e470 RDI: 0000000000000003
[ 74.823977] RBP: 00005614c1f3e470 R08: 0000000000000000 R09: 00007ffd8cdc6e80
[ 74.824297] R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000040000
[ 74.824612] R13: 00005614c1f3eab0 R14: 0000000000000000 R15: 00005614c1f3ec70
[ 74.824931] </TASK>
[ 74.825080] Modules linked in: vkms(+)
[ 74.825269] CR2: 00000000000000a8
[ 74.825505] ---[ end trace 0000000000000000 ]---
[ 74.825735] RIP: 0010:destroy_workqueue+0xf/0x2f0
[ 74.825948] Code: 41 5e 41 5f 5d e9 b1 24 ff 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 55 41 57 41 56 41 54 53 48 83 ec 10 49 89 ff <48> 8b bf a8 00 00 00 48 85 ff 74 14 49 c7 87 a8 00 00 00 00 00 00
[ 74.826609] RSP: 0018:ffffb2cc8217f928 EFLAGS: 00010286
[ 74.826843] RAX: 0000000000000004 RBX: 0000000000000003 RCX: 0000000000000001
[ 74.827114] RDX: 0000000000000002 RSI: 0000000000000082 RDI: 0000000000000000
[ 74.827382] RBP: ffffa23f9df001c0 R08: 0000000000b90826 R09: 000003fffffffc00
[ 74.827622] R10: 000000000000015d R11: 0000000000000000 R12: 0000000000000282
[ 74.827818] R13: 0000000000000001 R14: ffffa24098d20000 R15: 0000000000000000
[ 74.828008] FS: 00007fbd9fc9b740(0000) GS:ffffa240bbd00000(0000) knlGS:0000000000000000
[ 74.828245] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 74.828415] CR2: 00000000000000a8 CR3: 0000000103304000 CR4: 00000000000006e0
> +module_param_named(max_pipes, max_pipes, int, 0444);
> +MODULE_PARM_DESC(max_pipes, "Specify how many pipes to create");
> +
> DEFINE_DRM_GEM_FOPS(vkms_driver_fops);
>
> static void vkms_release(struct drm_device *dev)
> {
> - struct vkms_device *vkms = drm_device_to_vkms_device(dev);
> + int i;
> + struct vkms_device *vkmsdev = drm_device_to_vkms_device(dev);
>
> - if (vkms->output.composer_workq)
> - destroy_workqueue(vkms->output.composer_workq);
> + for (i = 0; i < vkmsdev->config->max_pipes; i++)
> + destroy_workqueue(vkmsdev->output[i].composer_workq);
> }
>
> static void vkms_atomic_commit_tail(struct drm_atomic_state *old_state)
> @@ -99,6 +104,7 @@ static int vkms_config_show(struct seq_file *m, void *data)
> seq_printf(m, "writeback=%d\n", vkmsdev->config->writeback);
> seq_printf(m, "cursor=%d\n", vkmsdev->config->cursor);
> seq_printf(m, "overlay=%d\n", vkmsdev->config->overlay);
> + seq_printf(m, "pipes=%d\n", vkmsdev->config->max_pipes);
>
> return 0;
> }
> @@ -133,6 +139,7 @@ static const struct drm_mode_config_helper_funcs vkms_mode_config_helpers = {
> static int vkms_modeset_init(struct vkms_device *vkmsdev)
> {
> struct drm_device *dev = &vkmsdev->drm;
> + int i, ret = 0;
>
> drm_mode_config_init(dev);
I commited a patch a while ago that changed this bit. Therefore, your patch
isn't applicable in the drm-misc-next. It would be nice if you could rebase
the patches on top of the drm-misc-next.
Best Regards,
- Maíra Canal
More information about the dri-devel
mailing list