[PATCH 7/9] drm/sti/sti_hdmi: convert to using is_hdmi from display info

Alain Volmat avolmat at me.com
Sat Apr 22 17:06:55 UTC 2023


Hi Jani,

On Thu, Sep 01, 2022 at 03:47:09PM +0300, Jani Nikula wrote:
> Prefer the parsed results for is_hdmi in display info over calling
> drm_detect_hdmi_monitor(). Remove the now redundant hdmi_monitor member
> from struct sti_hdmi.
> 
> Cc: Alain Volmat <alain.volmat at foss.st.com>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> ---
>  drivers/gpu/drm/sti/sti_hdmi.c | 11 ++++++-----
>  drivers/gpu/drm/sti/sti_hdmi.h |  2 --
>  2 files changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
> index cb82622877d2..7e6d47c1c43b 100644
> --- a/drivers/gpu/drm/sti/sti_hdmi.c
> +++ b/drivers/gpu/drm/sti/sti_hdmi.c
> @@ -266,6 +266,7 @@ static void hdmi_active_area(struct sti_hdmi *hdmi)
>   */
>  static void hdmi_config(struct sti_hdmi *hdmi)
>  {
> +	struct drm_connector *connector = hdmi->drm_connector;
>  	u32 conf;
>  
>  	DRM_DEBUG_DRIVER("\n");
> @@ -275,7 +276,7 @@ static void hdmi_config(struct sti_hdmi *hdmi)
>  
>  	/* Select encryption type and the framing mode */
>  	conf |= HDMI_CFG_ESS_NOT_OESS;
> -	if (hdmi->hdmi_monitor)
> +	if (connector->display_info.is_hdmi)
>  		conf |= HDMI_CFG_HDMI_NOT_DVI;
>  
>  	/* Set Hsync polarity */
> @@ -985,15 +986,15 @@ static int sti_hdmi_connector_get_modes(struct drm_connector *connector)
>  	if (!edid)
>  		goto fail;
>  
> -	hdmi->hdmi_monitor = drm_detect_hdmi_monitor(edid);
> -	DRM_DEBUG_KMS("%s : %dx%d cm\n",
> -		      (hdmi->hdmi_monitor ? "hdmi monitor" : "dvi monitor"),
> -		      edid->width_cm, edid->height_cm);
>  	cec_notifier_set_phys_addr_from_edid(hdmi->notifier, edid);
>  
>  	count = drm_add_edid_modes(connector, edid);
>  	drm_connector_update_edid_property(connector, edid);
>  
> +	DRM_DEBUG_KMS("%s : %dx%d cm\n",
> +		      (connector->display_info.is_hdmi ? "hdmi monitor" : "dvi monitor"),
> +		      edid->width_cm, edid->height_cm);
> +
>  	kfree(edid);
>  	return count;
>  
> diff --git a/drivers/gpu/drm/sti/sti_hdmi.h b/drivers/gpu/drm/sti/sti_hdmi.h
> index 05b2f3d0d48d..6d4c3f57bc46 100644
> --- a/drivers/gpu/drm/sti/sti_hdmi.h
> +++ b/drivers/gpu/drm/sti/sti_hdmi.h
> @@ -57,7 +57,6 @@ struct hdmi_audio_params {
>   * @reset: reset control of the hdmi phy
>   * @ddc_adapt: i2c ddc adapter
>   * @colorspace: current colorspace selected
> - * @hdmi_monitor: true if HDMI monitor detected else DVI monitor assumed
>   * @audio_pdev: ASoC hdmi-codec platform device
>   * @audio: hdmi audio parameters.
>   * @drm_connector: hdmi connector
> @@ -83,7 +82,6 @@ struct sti_hdmi {
>  	struct reset_control *reset;
>  	struct i2c_adapter *ddc_adapt;
>  	enum hdmi_colorspace colorspace;
> -	bool hdmi_monitor;
>  	struct platform_device *audio_pdev;
>  	struct hdmi_audio_params audio;
>  	struct drm_connector *drm_connector;
> -- 

Acked-by: Alain Volmat <avolmat at me.com>

Thanks.

> 2.34.1
> 


More information about the dri-devel mailing list