[PATCH v3 17/21] drm/msm/dpu: Describe TEAR interrupt registers for DSI interfaces
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Wed Apr 26 00:05:12 UTC 2023
On 26/04/2023 02:06, Marijn Suijten wrote:
> All SoCs since DPU 5.0.0 have the tear interrupt registers moved out of
> the PINGPONG block and into the INTF block. Wire up the IRQ register
> masks in the interrupt table for enabling, reading and clearing them.
>
> Signed-off-by: Marijn Suijten <marijn.suijten at somainline.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 52 +++++++++++++++++------
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 4 ++
> 2 files changed, 44 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> index e116993b2f8f7..5e2d68ebb113e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> @@ -17,18 +17,26 @@
> * Register offsets in MDSS register file for the interrupt registers
> * w.r.t. the MDP base
> */
> -#define MDP_INTF_OFF(intf) (0x6A000 + 0x800 * (intf))
> -#define MDP_INTF_INTR_EN(intf) (MDP_INTF_OFF(intf) + 0x1c0)
> -#define MDP_INTF_INTR_STATUS(intf) (MDP_INTF_OFF(intf) + 0x1c4)
> -#define MDP_INTF_INTR_CLEAR(intf) (MDP_INTF_OFF(intf) + 0x1c8)
> -#define MDP_AD4_OFF(ad4) (0x7C000 + 0x1000 * (ad4))
> -#define MDP_AD4_INTR_EN_OFF(ad4) (MDP_AD4_OFF(ad4) + 0x41c)
> -#define MDP_AD4_INTR_CLEAR_OFF(ad4) (MDP_AD4_OFF(ad4) + 0x424)
> -#define MDP_AD4_INTR_STATUS_OFF(ad4) (MDP_AD4_OFF(ad4) + 0x420)
> -#define MDP_INTF_REV_7xxx_OFF(intf) (0x34000 + 0x1000 * (intf))
> -#define MDP_INTF_REV_7xxx_INTR_EN(intf) (MDP_INTF_REV_7xxx_OFF(intf) + 0x1c0)
> -#define MDP_INTF_REV_7xxx_INTR_STATUS(intf) (MDP_INTF_REV_7xxx_OFF(intf) + 0x1c4)
> -#define MDP_INTF_REV_7xxx_INTR_CLEAR(intf) (MDP_INTF_REV_7xxx_OFF(intf) + 0x1c8)
> +#define MDP_INTF_OFF(intf) (0x6A000 + 0x800 * (intf))
> +#define MDP_INTF_INTR_EN(intf) (MDP_INTF_OFF(intf) + 0x1c0)
> +#define MDP_INTF_INTR_STATUS(intf) (MDP_INTF_OFF(intf) + 0x1c4)
> +#define MDP_INTF_INTR_CLEAR(intf) (MDP_INTF_OFF(intf) + 0x1c8)
> +#define MDP_INTF_TEAR_OFF(intf) (0x6D700 + 0x100 * (intf))
> +#define MDP_INTF_INTR_TEAR_EN(intf) (MDP_INTF_TEAR_OFF(intf) + 0x000)
> +#define MDP_INTF_INTR_TEAR_STATUS(intf) (MDP_INTF_TEAR_OFF(intf) + 0x004)
> +#define MDP_INTF_INTR_TEAR_CLEAR(intf) (MDP_INTF_TEAR_OFF(intf) + 0x008)
> +#define MDP_AD4_OFF(ad4) (0x7C000 + 0x1000 * (ad4))
> +#define MDP_AD4_INTR_EN_OFF(ad4) (MDP_AD4_OFF(ad4) + 0x41c)
> +#define MDP_AD4_INTR_CLEAR_OFF(ad4) (MDP_AD4_OFF(ad4) + 0x424)
> +#define MDP_AD4_INTR_STATUS_OFF(ad4) (MDP_AD4_OFF(ad4) + 0x420)
Please don't reindent lines together with doing the actual changes.
Please set the correct alignment in the patch 10
> +#define MDP_INTF_REV_7xxx_OFF(intf) (0x34000 + 0x1000 * (intf))
> +#define MDP_INTF_REV_7xxx_INTR_EN(intf) (MDP_INTF_REV_7xxx_OFF(intf) + 0x1c0)
> +#define MDP_INTF_REV_7xxx_INTR_STATUS(intf) (MDP_INTF_REV_7xxx_OFF(intf) + 0x1c4)
> +#define MDP_INTF_REV_7xxx_INTR_CLEAR(intf) (MDP_INTF_REV_7xxx_OFF(intf) + 0x1c8)
> +#define MDP_INTF_REV_7xxx_TEAR_OFF(intf) (0x34800 + 0x1000 * (intf))
> +#define MDP_INTF_REV_7xxx_INTR_TEAR_EN(intf) (MDP_INTF_REV_7xxx_TEAR_OFF(intf) + 0x000)
> +#define MDP_INTF_REV_7xxx_INTR_TEAR_STATUS(intf) (MDP_INTF_REV_7xxx_TEAR_OFF(intf) + 0x004)
> +#define MDP_INTF_REV_7xxx_INTR_TEAR_CLEAR(intf) (MDP_INTF_REV_7xxx_TEAR_OFF(intf) + 0x008)
>
> /**
> * struct dpu_intr_reg - array of DPU register sets
> @@ -93,6 +101,16 @@ static const struct dpu_intr_reg dpu_intr_set[] = {
> MDP_INTF_INTR_EN(5),
> MDP_INTF_INTR_STATUS(5)
> },
> + [MDP_INTF1_TEAR_INTR] = {
> + MDP_INTF_INTR_TEAR_CLEAR(1),
> + MDP_INTF_INTR_TEAR_EN(1),
> + MDP_INTF_INTR_TEAR_STATUS(1)
> + },
> + [MDP_INTF2_TEAR_INTR] = {
> + MDP_INTF_INTR_TEAR_CLEAR(2),
> + MDP_INTF_INTR_TEAR_EN(2),
> + MDP_INTF_INTR_TEAR_STATUS(2)
> + },
> [MDP_AD4_0_INTR] = {
> MDP_AD4_INTR_CLEAR_OFF(0),
> MDP_AD4_INTR_EN_OFF(0),
> @@ -113,11 +131,21 @@ static const struct dpu_intr_reg dpu_intr_set[] = {
> MDP_INTF_REV_7xxx_INTR_EN(1),
> MDP_INTF_REV_7xxx_INTR_STATUS(1)
> },
> + [MDP_INTF1_7xxx_TEAR_INTR] = {
> + MDP_INTF_REV_7xxx_INTR_TEAR_CLEAR(1),
> + MDP_INTF_REV_7xxx_INTR_TEAR_EN(1),
> + MDP_INTF_REV_7xxx_INTR_TEAR_STATUS(1)
> + },
> [MDP_INTF2_7xxx_INTR] = {
> MDP_INTF_REV_7xxx_INTR_CLEAR(2),
> MDP_INTF_REV_7xxx_INTR_EN(2),
> MDP_INTF_REV_7xxx_INTR_STATUS(2)
> },
> + [MDP_INTF2_7xxx_TEAR_INTR] = {
> + MDP_INTF_REV_7xxx_INTR_TEAR_CLEAR(2),
> + MDP_INTF_REV_7xxx_INTR_TEAR_EN(2),
> + MDP_INTF_REV_7xxx_INTR_TEAR_STATUS(2)
> + },
> [MDP_INTF3_7xxx_INTR] = {
> MDP_INTF_REV_7xxx_INTR_CLEAR(3),
> MDP_INTF_REV_7xxx_INTR_EN(3),
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> index 425465011c807..fda7f8c9caece 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> @@ -23,11 +23,15 @@ enum dpu_hw_intr_reg {
> MDP_INTF3_INTR,
> MDP_INTF4_INTR,
> MDP_INTF5_INTR,
> + MDP_INTF1_TEAR_INTR,
> + MDP_INTF2_TEAR_INTR,
> MDP_AD4_0_INTR,
> MDP_AD4_1_INTR,
> MDP_INTF0_7xxx_INTR,
> MDP_INTF1_7xxx_INTR,
> + MDP_INTF1_7xxx_TEAR_INTR,
> MDP_INTF2_7xxx_INTR,
> + MDP_INTF2_7xxx_TEAR_INTR,
> MDP_INTF3_7xxx_INTR,
> MDP_INTF4_7xxx_INTR,
> MDP_INTF5_7xxx_INTR,
>
--
With best wishes
Dmitry
More information about the dri-devel
mailing list