[PATCH v3 4/7] arm64: dts: allwinner: a64: reset pll-video0 rate

[Roman Beranek]

With pll-mipi as its source clock, the exact rate to which TCON0's data
clock can be set to is constrained by the current rate of pll-video0.
Unless changed on a request of another consumer, the rate of pll-video0
is left as inherited from the bootloader.

The default rate on reset is 297 MHz, a value preferable to what it is
later set to in u-boot (294 MHz). This happens unintentionally though,
as u-boot, for the sake of simplicity, rounds the rate requested by DE2
driver (297 MHz) to 6 MHz steps.

Reset the PLL to its default rate of 297 MHz.

Signed-off-by: Roman Beranek <me at crly.cz>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index e6a194db420d..cfc60dce80b0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -667,6 +667,9 @@ ccu: clock at 1c20000 {
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+
+			assigned-clocks = <&ccu CLK_PLL_VIDEO0>;
+			assigned-clock-rates = <297000000>;
 		};
 
 		pio: pinctrl at 1c20800 {
-- 
2.34.1