[PATCH 1/2] drm/panel: sitronix-st7789v: add panel orientation support

[neil.armstrong at linaro.org]

On 02/08/2023 15:19, Michael Riesch wrote:
> Hi Neil,
> 
> On 8/2/23 14:39, Neil Armstrong wrote:
>> On 18/07/2023 17:12, Michael Riesch wrote:
>>> Determine the orientation of the display based on the device tree and
>>> propagate it.
>>>
>>> While at it, fix the indentation in the struct drm_panel_funcs.
>>>
>>> Signed-off-by: Michael Riesch <michael.riesch at wolfvision.net>
>>> ---
>>>    drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 28
>>> +++++++++++++++++++++-----
>>>    1 file changed, 23 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
>>> b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
>>> index bbc4569cbcdc..6575f07d49e3 100644
>>> --- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
>>> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
>>> @@ -116,6 +116,7 @@ struct st7789v {
>>>        struct spi_device *spi;
>>>        struct gpio_desc *reset;
>>>        struct regulator *power;
>>> +    enum drm_panel_orientation orientation;
>>>    };
>>>      enum st7789v_prefix {
>>> @@ -170,6 +171,7 @@ static const struct drm_display_mode default_mode = {
>>>    static int st7789v_get_modes(struct drm_panel *panel,
>>>                     struct drm_connector *connector)
>>>    {
>>> +    struct st7789v *ctx = panel_to_st7789v(panel);
>>>        struct drm_display_mode *mode;
>>>          mode = drm_mode_duplicate(connector->dev, &default_mode);
>>> @@ -188,9 +190,22 @@ static int st7789v_get_modes(struct drm_panel
>>> *panel,
>>>        connector->display_info.width_mm = 61;
>>>        connector->display_info.height_mm = 103;
>>>    +    /*
>>> +     * TODO: Remove once all drm drivers call
>>> +     * drm_connector_set_orientation_from_panel()
>>> +     */
>>> +    drm_connector_set_panel_orientation(connector, ctx->orientation);
>>> +
>>>        return 1;
>>>    }
>>>    +static enum drm_panel_orientation st7789v_get_orientation(struct
>>> drm_panel *p)
>>> +{
>>> +    struct st7789v *ctx = panel_to_st7789v(p);
>>> +
>>> +    return ctx->orientation;
>>> +}
>>> +
>>>    static int st7789v_prepare(struct drm_panel *panel)
>>>    {
>>>        struct st7789v *ctx = panel_to_st7789v(panel);
>>> @@ -346,11 +361,12 @@ static int st7789v_unprepare(struct drm_panel
>>> *panel)
>>>    }
>>>      static const struct drm_panel_funcs st7789v_drm_funcs = {
>>> -    .disable    = st7789v_disable,
>>> -    .enable        = st7789v_enable,
>>> -    .get_modes    = st7789v_get_modes,
>>> -    .prepare    = st7789v_prepare,
>>> -    .unprepare    = st7789v_unprepare,
>>> +    .disable = st7789v_disable,
>>> +    .enable    = st7789v_enable,
>>> +    .get_modes = st7789v_get_modes,
>>> +    .get_orientation = st7789v_get_orientation,
>>> +    .prepare = st7789v_prepare,
>>> +    .unprepare = st7789v_unprepare,
>>
>> Changing the indentation of the whole block is a spurious change,
>> either change it in a separate patch or use the current indentation
>> style...
> 
> OK, if we agree that the indentation should be changed I'll be happy to
> move the change to an extra patch.

Sure,

Neil

> 
>>>    };
>>>      static int st7789v_probe(struct spi_device *spi)
>>> @@ -382,6 +398,8 @@ static int st7789v_probe(struct spi_device *spi)
>>>        if (ret)
>>>            return ret;
>>>    +    of_drm_get_panel_orientation(spi->dev.of_node, &ctx->orientation);
>>> +
>>>        drm_panel_add(&ctx->panel);
>>>          return 0;
>>>
>>
>> With this changed:
>>
>> Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
> 
> Thanks!
> 
> Best regards,
> Michael
> 
>>
>> Thanks,
>> Neil
>>