[PATCH v10 04/16] drm/mediatek: gamma: Improve and simplify HW LUT calculation
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Fri Aug 4 07:28:38 UTC 2023
Use drm_color_lut_extract() to avoid open-coding the bits reduction
calculations for each color channel and use a struct drm_color_lut
to temporarily store the information instead of an array of u32.
Also, slightly improve the precision of the HW LUT calculation in the
LUT DIFF case by performing the subtractions on the 16-bits values and
doing the 10 bits conversion later.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
Reviewed-by: Jason-JH.Lin <jason-jh.lin at mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat at baylibre.com>
---
drivers/gpu/drm/mediatek/mtk_disp_gamma.c | 30 +++++++++++++++--------
1 file changed, 20 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
index 7575237625d2..fd6a75a64a9f 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
@@ -74,7 +74,6 @@ void mtk_gamma_set_common(struct device *dev, void __iomem *regs, struct drm_crt
bool lut_diff;
u16 lut_size;
u32 word;
- u32 diff[3] = {0};
/* If there's no gamma lut there's nothing to do here. */
if (!state->gamma_lut)
@@ -97,18 +96,29 @@ void mtk_gamma_set_common(struct device *dev, void __iomem *regs, struct drm_crt
lut_base = regs + DISP_GAMMA_LUT;
lut = (struct drm_color_lut *)state->gamma_lut->data;
for (i = 0; i < lut_size; i++) {
+ struct drm_color_lut diff, hwlut;
+
+ hwlut.red = drm_color_lut_extract(lut[i].red, 10);
+ hwlut.green = drm_color_lut_extract(lut[i].green, 10);
+ hwlut.blue = drm_color_lut_extract(lut[i].blue, 10);
+
if (!lut_diff || (i % 2 == 0)) {
- word = (((lut[i].red >> 6) & LUT_10BIT_MASK) << 20) +
- (((lut[i].green >> 6) & LUT_10BIT_MASK) << 10) +
- ((lut[i].blue >> 6) & LUT_10BIT_MASK);
+ word = hwlut.red << 20 +
+ hwlut.green << 10 +
+ hwlut.red;
} else {
- diff[0] = (lut[i].red >> 6) - (lut[i - 1].red >> 6);
- diff[1] = (lut[i].green >> 6) - (lut[i - 1].green >> 6);
- diff[2] = (lut[i].blue >> 6) - (lut[i - 1].blue >> 6);
+ diff.red = lut[i].red - lut[i - 1].red;
+ diff.red = drm_color_lut_extract(diff.red, 10);
+
+ diff.green = lut[i].green - lut[i - 1].green;
+ diff.green = drm_color_lut_extract(diff.green, 10);
+
+ diff.blue = lut[i].blue - lut[i - 1].blue;
+ diff.blue = drm_color_lut_extract(diff.blue, 10);
- word = ((diff[0] & LUT_10BIT_MASK) << 20) +
- ((diff[1] & LUT_10BIT_MASK) << 10) +
- (diff[2] & LUT_10BIT_MASK);
+ word = diff.blue << 20 +
+ diff.green << 10 +
+ diff.red;
}
writel(word, (lut_base + i * 4));
}
--
2.41.0
More information about the dri-devel
mailing list