[PATCH v2 1/1] backlight: hid_bl: Add VESA virtual control panel HID backlight driver
Thomas Weißschuh
thomas at t-8ch.de
Sun Aug 6 09:57:27 UTC 2023
Hi,
this should probably also go to the maintainers of the "HID CORE LAYER"
for review:
HID CORE LAYER
M: Jiri Kosina <jikos at kernel.org>
M: Benjamin Tissoires <benjamin.tissoires at redhat.com>
L: linux-input at vger.kernel.org
And maybe it would better fit to be in drivers/hid/ ?
(Something for the maintainers to figure out)
Some tiny review comments inline.
On 2023-08-06 11:14:03+0200, Julius Zint wrote:
> The HID spec defines the following Usage IDs (p. 345 ff):
>
> - Monitor Page (0x80) -> Monitor Control (0x01)
> - VESA Virtual Controls Page (0x82) -> Brightness (0x10)
>
> Apple made use of them in their Apple Studio Display and most likely on
> other external displays (LG UltraFine 5k, Pro Display XDR).
>
> The driver will work for any HID device with a report, where the
> application matches the Monitor Control Usage ID and:
>
> 1. An Input field in this report with the Brightness Usage ID (to get
> the current brightness)
> 2. A Feature field in this report with the Brightness Usage ID (to
> set the current brightness)
>
> This driver has been developed and tested with the Apple Studio Display.
> Here is a small excerpt from the decoded HID descriptor showing the
> feature field for setting the brightness:
>
> Usage Page (Monitor VESA VCP), ; Monitor VESA VPC (82h, monitor page)
> Usage (10h, Brightness),
> Logical Minimum (400),
> Logical Maximum (60000),
> Unit (Centimeter^-2 * Candela),
> Unit Exponent (14),
> Report Size (32),
> Report Count (1),
> Feature (Variable, Null State),
>
> The full HID descriptor dump is available as a comment in the source
> code.
>
> Signed-off-by: Julius Zint <julius at zint.sh>
> ---
> drivers/video/backlight/Kconfig | 8 +
> drivers/video/backlight/Makefile | 1 +
> drivers/video/backlight/hid_bl.c | 267 +++++++++++++++++++++++++++++++
> 3 files changed, 276 insertions(+)
> create mode 100644 drivers/video/backlight/hid_bl.c
>
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 51387b1ef012..b964a820956d 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -472,6 +472,14 @@ config BACKLIGHT_LED
> If you have a LCD backlight adjustable by LED class driver, say Y
> to enable this driver.
>
> +config BACKLIGHT_HID
> + tristate "VESA VCP HID Backlight Driver"
> + depends on HID
> + help
> + If you have an external display with VESA compliant HID brightness
> + controls then say Y to enable this backlight driver. Currently the
> + only supported device is the Apple Studio Display.
> +
> endif # BACKLIGHT_CLASS_DEVICE
>
> endmenu
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index f72e1c3c59e9..835f9b8772c7 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -58,3 +58,4 @@ obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
> obj-$(CONFIG_BACKLIGHT_ARCXCNN) += arcxcnn_bl.o
> obj-$(CONFIG_BACKLIGHT_RAVE_SP) += rave-sp-backlight.o
> obj-$(CONFIG_BACKLIGHT_LED) += led_bl.o
> +obj-$(CONFIG_BACKLIGHT_HID) += hid_bl.o
> diff --git a/drivers/video/backlight/hid_bl.c b/drivers/video/backlight/hid_bl.c
> new file mode 100644
> index 000000000000..1b9cbaa1551c
> --- /dev/null
> +++ b/drivers/video/backlight/hid_bl.c
> @@ -0,0 +1,267 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include <linux/device.h>
> +#include <linux/hid.h>
> +#include <linux/module.h>
> +#include <linux/backlight.h>
> +
> +#define APPLE_STUDIO_DISPLAY_VENDOR_ID 0x05ac
> +#define APPLE_STUDIO_DISPLAY_PRODUCT_ID 0x1114
> +
> +#define HID_USAGE_MONITOR_CTRL 0x800001
> +#define HID_USAGE_VESA_VCP_BRIGHTNESS 0x820010
> +
> +/*
> + * Apple Studio Display HID report descriptor
> + *
> + * Usage Page (Monitor), ; USB monitor (80h, monitor page)
> + * Usage (01h),
> + * Collection (Application),
> + * Report ID (1),
> + *
> + * Usage Page (Monitor VESA VCP), ; Monitor VESA virtual control panel (82h, monitor page)
> + * Usage (10h, Brightness),
> + * Logical Minimum (400),
> + * Logical Maximum (60000),
> + * Unit (Centimeter^-2 * Candela),
> + * Unit Exponent (14),
> + * Report Size (32),
> + * Report Count (1),
> + * Feature (Variable, Null State),
> + *
> + * Usage Page (PID), ; Physical interface device (0Fh)
> + * Usage (50h),
> + * Logical Minimum (0),
> + * Logical Maximum (20000),
> + * Unit (1001h),
> + * Unit Exponent (13),
> + * Report Size (16),
> + * Feature (Variable, Null State),
> + *
> + * Usage Page (Monitor VESA VCP), ; Monitor VESA virtual control panel (82h, monitor page)
> + * Usage (10h, Brightness),
> + * Logical Minimum (400),
> + * Logical Maximum (60000),
> + * Unit (Centimeter^-2 * Candela),
> + * Unit Exponent (14),
> + * Report Size (32),
> + * Report Count (1),
> + * Input (Variable),
> + * End Collection
> + */
> +
> +struct hid_bl_data {
> + struct hid_device *hdev;
> + unsigned int min_brightness;
> + unsigned int max_brightness;
> + struct hid_field *input_field;
> + struct hid_field *feature_field;
> +};
> +
> +static struct hid_field *hid_get_usage_field(struct hid_device *hdev,
> + unsigned int report_type,
> + unsigned int application, unsigned int usage)
> +{
> + struct hid_report_enum *re = &hdev->report_enum[report_type];
> + struct hid_report *report;
> + int i, j;
> +
> + list_for_each_entry(report, &re->report_list, list) {
> + if (report->application != application)
> + continue;
> +
> + for (i = 0; i < report->maxfield; i++) {
> + struct hid_field *field = report->field[i];
> +
> + for (j = 0; j < field->maxusage; j++)
> + if (field->usage[j].hid == usage)
> + return field;
> + }
> + }
> + return NULL;
> +}
> +
> +static void hid_bl_remove(struct hid_device *hdev)
> +{
> + struct backlight_device *bl;
> + struct hid_bl_data *data;
> +
> + hid_dbg(hdev, "remove\n");
> + bl = hid_get_drvdata(hdev);
> + data = bl_get_data(bl);
> +
> + devm_backlight_device_unregister(&hdev->dev, bl);
> + hid_hw_close(hdev);
> + hid_hw_stop(hdev);
> + hid_set_drvdata(hdev, NULL);
> + devm_kfree(&hdev->dev, data);
Are these explicit devm_ cleanups needed, shouldn't the driver core take
care of it?
I'm not sure myself.
> +}
> +
> +static int hid_get_brightness(struct hid_bl_data *data)
> +{
> + struct hid_field *field;
> + int result;
> +
> + field = data->input_field;
> + hid_hw_request(data->hdev, field->report, HID_REQ_GET_REPORT);
> + hid_hw_wait(data->hdev);
> + result = *field->new_value;
> + hid_dbg(data->hdev, "get brightness: %d\n", result);
> +
> + return result;
> +}
> +
> +static int hid_bl_get_brightness(struct backlight_device *bl)
> +{
> + struct hid_bl_data *data;
> + int brightness;
> +
> + data = bl_get_data(bl);
> + brightness = hid_get_brightness(data);
> + return brightness - data->min_brightness;
> +}
> +
> +static void hid_set_brightness(struct hid_bl_data *data, int brightness)
Some functions are using the generic hid_ prefix instead of the more
specific hid_bl_, is that intentional?
> +{
> + struct hid_field *field;
> +
> + field = data->feature_field;
> + *field->value = brightness;
> + hid_hw_request(data->hdev, field->report, HID_REQ_SET_REPORT);
> + hid_hw_wait(data->hdev);
> + hid_dbg(data->hdev, "set brightness: %d\n", brightness);
> +}
> +
> +static int hid_bl_update_status(struct backlight_device *bl)
> +{
> + struct hid_bl_data *data;
> + int brightness;
> +
> + data = bl_get_data(bl);
> + brightness = backlight_get_brightness(bl);
> + brightness += data->min_brightness;
> + hid_set_brightness(data, brightness);
> + return 0;
> +}
> +
> +static const struct backlight_ops hid_bl_ops = {
> + .update_status = hid_bl_update_status,
> + .get_brightness = hid_bl_get_brightness,
> +};
> +
> +static int hid_bl_probe(struct hid_device *hdev, const struct hid_device_id *id)
> +{
> + int ret;
> + struct hid_field *input_field;
> + struct hid_field *feature_field;
> + struct hid_bl_data *data;
> + struct backlight_properties props;
> + struct backlight_device *bl;
> +
> + hid_dbg(hdev, "probe\n");
> +
> + ret = hid_parse(hdev);
> + if (ret)
> + hid_err(hdev, "parse failed\n");
If this fails should the probe continue?
The errorcodes would be useful to log, too.
(Also in other places)
> +
> + ret = hid_hw_start(hdev, HID_CONNECT_DRIVER);
> + if (ret) {
> + hid_err(hdev, "hw start failed\n");
> + return ret;
> + }
> +
> + input_field = hid_get_usage_field(hdev, HID_INPUT_REPORT,
> + HID_USAGE_MONITOR_CTRL,
> + HID_USAGE_VESA_VCP_BRIGHTNESS);
> + if (input_field == NULL) {
> + ret = -ENODEV;
> + goto exit_stop;
> + }
> +
> + feature_field = hid_get_usage_field(hdev, HID_FEATURE_REPORT,
> + HID_USAGE_MONITOR_CTRL,
> + HID_USAGE_VESA_VCP_BRIGHTNESS);
> + if (feature_field == NULL) {
> + ret = -ENODEV;
> + goto exit_stop;
> + }
> +
> + if (input_field->logical_minimum != feature_field->logical_minimum) {
> + hid_warn(hdev, "minimums do not match: %d / %d\n",
> + input_field->logical_minimum,
> + feature_field->logical_minimum);
> + ret = -ENODEV;
> + goto exit_stop;
> + }
> +
> + if (input_field->logical_maximum != feature_field->logical_maximum) {
> + hid_warn(hdev, "maximums do not match: %d / %d\n",
> + input_field->logical_maximum,
> + feature_field->logical_maximum);
> + ret = -ENODEV;
> + goto exit_stop;
> + }
> +
> + hid_dbg(hdev, "Monitor VESA VCP with brightness control\n");
> +
> + ret = hid_hw_open(hdev);
> + if (ret) {
> + hid_err(hdev, "hw open failed\n");
> + goto exit_stop;
> + }
> +
> + data = devm_kzalloc(&hdev->dev, sizeof(struct hid_bl_data), GFP_KERNEL);
sizeof(*data)
> + if (data == NULL) {
> + ret = -ENOMEM;
> + goto exit_stop;
> + }
> + data->hdev = hdev;
> + data->min_brightness = input_field->logical_minimum;
> + data->max_brightness = input_field->logical_maximum;
> + data->input_field = input_field;
> + data->feature_field = feature_field;
> +
> + memset(&props, 0, sizeof(props));
> + props.type = BACKLIGHT_RAW;
> + props.max_brightness = data->max_brightness - data->min_brightness;
> +
> + bl = devm_backlight_device_register(&hdev->dev, "vesa_vcp",
> + &hdev->dev, data,
> + &hid_bl_ops,
> + &props);
> + if (IS_ERR(bl)) {
> + hid_err(hdev, "failed to register backlight\n");
> + ret = PTR_ERR(bl);
> + goto exit_free;
> + }
> +
> + hid_set_drvdata(hdev, bl);
> +
> + return 0;
> +
> +exit_free:
> + hid_hw_close(hdev);
> + devm_kfree(&hdev->dev, data);
> +
> +exit_stop:
> + hid_hw_stop(hdev);
> + return ret;
> +}
> +
> +static const struct hid_device_id hid_bl_devices[] = {
> + { HID_USB_DEVICE(APPLE_STUDIO_DISPLAY_VENDOR_ID,
> + APPLE_STUDIO_DISPLAY_PRODUCT_ID) },
> + { }
> +};
> +MODULE_DEVICE_TABLE(hid, hid_bl_devices);
> +
> +static struct hid_driver hid_bl_driver = {
> + .name = "hid_backlight",
> + .id_table = hid_bl_devices,
> + .probe = hid_bl_probe,
> + .remove = hid_bl_remove,
> +};
> +module_hid_driver(hid_bl_driver);
> +
> +MODULE_AUTHOR("Julius Zint <julius at zint.sh>");
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Backlight driver for HID devices");
> --
> 2.41.0
>
More information about the dri-devel
mailing list