[PATCH v3 3/9] drm/bridge: synopsys: dw-mipi-dsi: Force input bus flags
Liu Ying
victor.liu at nxp.com
Mon Aug 7 05:26:02 UTC 2023
The DATAEN_ACTIVE_LOW bit in DSI_DPI_CFG_POL register is set to zero,
so set the DRM_BUS_FLAG_DE_HIGH flag in input_bus_cfg.flags. It appears
that the DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE flag also makes sense, so
set it in input_bus_cfg.flags too. With this patch, the flags set by
drm_atomic_bridge_propagate_bus_flags() are overridden (see comment in
that function) in case any downstream bridges propagates invalid flags
to this bridge. A real problematic case is to connect a RM67191 MIPI
DSI panel whose driver sets DRM_BUS_FLAG_DE_LOW and
DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE bus flags.
Signed-off-by: Liu Ying <victor.liu at nxp.com>
---
v1->v3:
* No change.
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index 8580b8a97fb1..8cd89a63b5f2 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -23,6 +23,7 @@
#include <drm/bridge/dw_mipi_dsi.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
+#include <drm/drm_connector.h>
#include <drm/drm_crtc.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
@@ -565,6 +566,17 @@ dw_mipi_dsi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
return input_fmts;
}
+static int dw_mipi_dsi_bridge_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ bridge_state->input_bus_cfg.flags =
+ DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;
+
+ return 0;
+}
+
static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
{
u32 val;
@@ -1033,6 +1045,7 @@ static const struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
.atomic_get_input_bus_fmts = dw_mipi_dsi_bridge_atomic_get_input_bus_fmts,
+ .atomic_check = dw_mipi_dsi_bridge_atomic_check,
.atomic_reset = drm_atomic_helper_bridge_reset,
.atomic_enable = dw_mipi_dsi_bridge_atomic_enable,
.atomic_post_disable = dw_mipi_dsi_bridge_post_atomic_disable,
--
2.37.1
More information about the dri-devel
mailing list