[PATCH v3 0/5] Add JDI LPM102A188A display panel support

[Diogo Ivo]

Hello,

These patches add support for the JDI LPM102A188A display panel,
found in the Google Pixel C.

Patch 1 adds the DT bindings for the panel.

Patch 2 adds the panel driver, which is based on the downstream
kernel driver published by Google and developed by Sean Paul.

Patches 3-5 add DT nodes for the regulator, backlight controller and
display panel. 

The first version of this patch series can be found at:
https://lore.kernel.org/all/20220929170502.1034040-1-diogo.ivo@tecnico.ulisboa.pt/

The first submission of v2 can be found at:
https://lore.kernel.org/all/20221025153746.101278-1-diogo.ivo@tecnico.ulisboa.pt/

Changes in v2:
 - Patch 1: remove touchscreen reset gpio property
 - Patch 2: clear register based on its value rather than a DT property
 - Patch 3: tune backlight delay values
 - Patch 4: add generic node names, remove underscores

Changes in v3:
 - Patch 1: add Reviewed-by
 - Patch 2: fix error handling, remove enabled/prepared booleans, add
   dc/dc setting
 - Patches 3-5: Split previous patch 3 into three different patches,
   each adding a separate node 
 - removed previous patch 2 pertaining to Tegra DSI reset as it was upstreamed

Diogo Ivo (5):
  dt-bindings: display: Add bindings for JDI LPM102A188A
  drm/panel: Add driver for JDI LPM102A188A
  arm64: dts: smaug: Add DSI/CSI regulator
  arm64: dts: smaug: Add backlight node
  arm64: dts: smaug: Add display panel node

 .../display/panel/jdi,lpm102a188a.yaml        |  94 +++
 arch/arm64/boot/dts/nvidia/tegra210-smaug.dts |  66 +++
 drivers/gpu/drm/panel/Kconfig                 |  11 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 drivers/gpu/drm/panel/panel-jdi-lpm102a188a.c | 551 ++++++++++++++++++
 5 files changed, 723 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-jdi-lpm102a188a.c

-- 
2.41.0