[PATCH 05/11] drm/bridge: tc358768: Print logical values, not raw register values

Péter Ujfalusi peter.ujfalusi at gmail.com
Fri Aug 11 16:31:39 UTC 2023



On 04/08/2023 13:44, Tomi Valkeinen wrote:
> The driver debug prints DSI related timings as raw register values in
> hex. It is much more useful to see the "logical" value of the timing,
> not the register value.

I'm a bit confused by the term 'logical' value, I think you meant
decimal, easier to read by humans numbers.

> Change the prints to print the values separately, in case a single
> register contains multiple values, and use %u to have it in a more human
> consumable form.

But, yes, decimal is better for the dmesg, as I recall I had a tool
which was using hex numbers so it was better to have the prints also in hex.

Reviewed-by: Peter Ujfalusi <peter.ujfalusi at gmail.com>

> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ideasonboard.com>
> ---
>  drivers/gpu/drm/bridge/tc358768.c | 21 ++++++++++++---------
>  1 file changed, 12 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/tc358768.c b/drivers/gpu/drm/bridge/tc358768.c
> index 9b633038af33..0ef51d04bb21 100644
> --- a/drivers/gpu/drm/bridge/tc358768.c
> +++ b/drivers/gpu/drm/bridge/tc358768.c
> @@ -739,57 +739,59 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
>  
>  	/* LP11 > 100us for D-PHY Rx Init */
>  	val = tc358768_ns_to_cnt(100 * 1000, dsibclk_nsk) - 1;
> -	dev_dbg(priv->dev, "LINEINITCNT: 0x%x\n", val);
> +	dev_dbg(priv->dev, "LINEINITCNT: %u\n", val);
>  	tc358768_write(priv, TC358768_LINEINITCNT, val);
>  
>  	/* LPTimeCnt > 50ns */
>  	val = tc358768_ns_to_cnt(50, dsibclk_nsk) - 1;
>  	lptxcnt = val;
> -	dev_dbg(priv->dev, "LPTXTIMECNT: 0x%x\n", val);
> +	dev_dbg(priv->dev, "LPTXTIMECNT: %u\n", val);
>  	tc358768_write(priv, TC358768_LPTXTIMECNT, val);
>  
>  	/* 38ns < TCLK_PREPARE < 95ns */
>  	val = tc358768_ns_to_cnt(65, dsibclk_nsk) - 1;
> +	dev_dbg(priv->dev, "TCLK_PREPARECNT %u\n", val);
>  	/* TCLK_PREPARE + TCLK_ZERO > 300ns */
>  	val2 = tc358768_ns_to_cnt(300 - tc358768_to_ns(2 * ui_nsk),
>  				  dsibclk_nsk) - 2;
> +	dev_dbg(priv->dev, "TCLK_ZEROCNT %u\n", val2);
>  	val |= val2 << 8;
> -	dev_dbg(priv->dev, "TCLK_HEADERCNT: 0x%x\n", val);
>  	tc358768_write(priv, TC358768_TCLK_HEADERCNT, val);
>  
>  	/* TCLK_TRAIL > 60ns AND TEOT <= 105 ns + 12*UI */
>  	raw_val = tc358768_ns_to_cnt(60 + tc358768_to_ns(2 * ui_nsk), dsibclk_nsk) - 5;
>  	val = clamp(raw_val, 0, 127);
> -	dev_dbg(priv->dev, "TCLK_TRAILCNT: 0x%x\n", val);
> +	dev_dbg(priv->dev, "TCLK_TRAILCNT: %u\n", val);
>  	tc358768_write(priv, TC358768_TCLK_TRAILCNT, val);
>  
>  	/* 40ns + 4*UI < THS_PREPARE < 85ns + 6*UI */
>  	val = 50 + tc358768_to_ns(4 * ui_nsk);
>  	val = tc358768_ns_to_cnt(val, dsibclk_nsk) - 1;
> +	dev_dbg(priv->dev, "THS_PREPARECNT %u\n", val);
>  	/* THS_PREPARE + THS_ZERO > 145ns + 10*UI */
>  	raw_val = tc358768_ns_to_cnt(145 - tc358768_to_ns(3 * ui_nsk), dsibclk_nsk) - 10;
>  	val2 = clamp(raw_val, 0, 127);
> +	dev_dbg(priv->dev, "THS_ZEROCNT %u\n", val2);
>  	val |= val2 << 8;
> -	dev_dbg(priv->dev, "THS_HEADERCNT: 0x%x\n", val);
>  	tc358768_write(priv, TC358768_THS_HEADERCNT, val);
>  
>  	/* TWAKEUP > 1ms in lptxcnt steps */
>  	val = tc358768_ns_to_cnt(1020000, dsibclk_nsk);
>  	val = val / (lptxcnt + 1) - 1;
> -	dev_dbg(priv->dev, "TWAKEUP: 0x%x\n", val);
> +	dev_dbg(priv->dev, "TWAKEUP: %u\n", val);
>  	tc358768_write(priv, TC358768_TWAKEUP, val);
>  
>  	/* TCLK_POSTCNT > 60ns + 52*UI */
>  	val = tc358768_ns_to_cnt(60 + tc358768_to_ns(52 * ui_nsk),
>  				 dsibclk_nsk) - 3;
> -	dev_dbg(priv->dev, "TCLK_POSTCNT: 0x%x\n", val);
> +	dev_dbg(priv->dev, "TCLK_POSTCNT: %u\n", val);
>  	tc358768_write(priv, TC358768_TCLK_POSTCNT, val);
>  
>  	/* max(60ns + 4*UI, 8*UI) < THS_TRAILCNT < 105ns + 12*UI */
>  	raw_val = tc358768_ns_to_cnt(60 + tc358768_to_ns(18 * ui_nsk),
>  				     dsibclk_nsk) - 4;
>  	val = clamp(raw_val, 0, 15);
> -	dev_dbg(priv->dev, "THS_TRAILCNT: 0x%x\n", val);
> +	dev_dbg(priv->dev, "THS_TRAILCNT: %u\n", val);
>  	tc358768_write(priv, TC358768_THS_TRAILCNT, val);
>  
>  	val = BIT(0);
> @@ -803,10 +805,11 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
>  	/* TXTAGOCNT[26:16] RXTASURECNT[10:0] */
>  	val = tc358768_to_ns((lptxcnt + 1) * dsibclk_nsk * 4);
>  	val = tc358768_ns_to_cnt(val, dsibclk_nsk) / 4 - 1;
> +	dev_dbg(priv->dev, "TXTAGOCNT: %u\n", val);
>  	val2 = tc358768_ns_to_cnt(tc358768_to_ns((lptxcnt + 1) * dsibclk_nsk),
>  				  dsibclk_nsk) - 2;
> +	dev_dbg(priv->dev, "RXTASURECNT: %u\n", val2);
>  	val = val << 16 | val2;
> -	dev_dbg(priv->dev, "BTACNTRL1: 0x%x\n", val);
>  	tc358768_write(priv, TC358768_BTACNTRL1, val);
>  
>  	/* START[0] */
> 

-- 
Péter


More information about the dri-devel mailing list