[PATCH 02/11] drm/bridge: tc358768: Fix bit updates

Tomi Valkeinen tomi.valkeinen at ideasonboard.com
Fri Aug 11 17:02:23 UTC 2023


On 11/08/2023 19:23, Péter Ujfalusi wrote:
> 
> 
> On 04/08/2023 13:44, Tomi Valkeinen wrote:
>> The driver has a few places where it does:
>>
>> if (thing_is_enabled_in_config)
>> 	update_thing_bit_in_hw()
>>
>> This means that if the thing is _not_ enabled, the bit never gets
>> cleared. This affects the h/vsyncs and continuous DSI clock bits.
> 
> I guess the idea was to keep the reset value unless it needs to be flipped.
> 
>>
>> Fix the driver to always update the bit.
>>
>> Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ideasonboard.com>
>> ---
>>   drivers/gpu/drm/bridge/tc358768.c | 13 +++++++------
>>   1 file changed, 7 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/tc358768.c b/drivers/gpu/drm/bridge/tc358768.c
>> index bc97a837955b..b668f77673c3 100644
>> --- a/drivers/gpu/drm/bridge/tc358768.c
>> +++ b/drivers/gpu/drm/bridge/tc358768.c
>> @@ -794,8 +794,8 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
>>   		val |= BIT(i + 1);
>>   	tc358768_write(priv, TC358768_HSTXVREGEN, val);
>>   
>> -	if (!(mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS))
>> -		tc358768_write(priv, TC358768_TXOPTIONCNTRL, 0x1);
>> +	tc358768_write(priv, TC358768_TXOPTIONCNTRL,
>> +		       (mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) ? 0 : BIT(0));
>>   
>>   	/* TXTAGOCNT[26:16] RXTASURECNT[10:0] */
>>   	val = tc358768_to_ns((lptxcnt + 1) * dsibclk_nsk * 4);
>> @@ -861,11 +861,12 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
>>   	tc358768_write(priv, TC358768_DSI_HACT, hact);
>>   
>>   	/* VSYNC polarity */
>> -	if (!(mode->flags & DRM_MODE_FLAG_NVSYNC))
>> -		tc358768_update_bits(priv, TC358768_CONFCTL, BIT(5), BIT(5));
>> +	tc358768_update_bits(priv, TC358768_CONFCTL, BIT(5),
>> +			     (mode->flags & DRM_MODE_FLAG_PVSYNC) ? BIT(5) : 0);
> 
> Was this the reverse before and should be:
> (mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : BIT(5)

Bit 5 is 1 for active high vsync polarity. The test was previously 
!nvsync, i.e. the same as pvsync.

  Tomi



More information about the dri-devel mailing list