[PATCH v4 2/3] phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Aug 17 14:55:15 UTC 2023
Switch to using the new DRM_AUX_BRIDGE helper to create the
transparent DRM bridge device instead of handcoding corresponding
functionality.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/phy/qualcomm/Kconfig | 2 +-
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 44 ++---------------------
2 files changed, 3 insertions(+), 43 deletions(-)
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index ced603806375..97f53debe761 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -63,7 +63,7 @@ config PHY_QCOM_QMP_COMBO
depends on DRM || DRM=n
select GENERIC_PHY
select MFD_SYSCON
- select DRM_PANEL_BRIDGE if DRM
+ select DRM_AUX_BRIDGE if DRM_BRIDGE && OF
help
Enable this to support the QMP Combo PHY transceiver that is used
with USB3 and DisplayPort controllers on Qualcomm chips.
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 9c3de41ecedb..367d5e93422c 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -21,7 +21,7 @@
#include <linux/usb/typec.h>
#include <linux/usb/typec_mux.h>
-#include <drm/drm_bridge.h>
+#include <drm/bridge/aux-bridge.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
@@ -1419,8 +1419,6 @@ struct qmp_combo {
struct clk_hw dp_link_hw;
struct clk_hw dp_pixel_hw;
- struct drm_bridge bridge;
-
struct typec_switch_dev *sw;
enum typec_orientation orientation;
};
@@ -3193,44 +3191,6 @@ static int qmp_combo_typec_switch_register(struct qmp_combo *qmp)
}
#endif
-#if IS_ENABLED(CONFIG_DRM)
-static int qmp_combo_bridge_attach(struct drm_bridge *bridge,
- enum drm_bridge_attach_flags flags)
-{
- struct qmp_combo *qmp = container_of(bridge, struct qmp_combo, bridge);
- struct drm_bridge *next_bridge;
-
- if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR))
- return -EINVAL;
-
- next_bridge = devm_drm_of_get_bridge(qmp->dev, qmp->dev->of_node, 0, 0);
- if (IS_ERR(next_bridge)) {
- dev_err(qmp->dev, "failed to acquire drm_bridge: %pe\n", next_bridge);
- return PTR_ERR(next_bridge);
- }
-
- return drm_bridge_attach(bridge->encoder, next_bridge, bridge,
- DRM_BRIDGE_ATTACH_NO_CONNECTOR);
-}
-
-static const struct drm_bridge_funcs qmp_combo_bridge_funcs = {
- .attach = qmp_combo_bridge_attach,
-};
-
-static int qmp_combo_dp_register_bridge(struct qmp_combo *qmp)
-{
- qmp->bridge.funcs = &qmp_combo_bridge_funcs;
- qmp->bridge.of_node = qmp->dev->of_node;
-
- return devm_drm_bridge_add(qmp->dev, &qmp->bridge);
-}
-#else
-static int qmp_combo_dp_register_bridge(struct qmp_combo *qmp)
-{
- return 0;
-}
-#endif
-
static int qmp_combo_parse_dt_lecacy_dp(struct qmp_combo *qmp, struct device_node *np)
{
struct device *dev = qmp->dev;
@@ -3436,7 +3396,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (ret)
return ret;
- ret = qmp_combo_dp_register_bridge(qmp);
+ ret = drm_aux_bridge_register(dev);
if (ret)
return ret;
--
2.39.2
More information about the dri-devel
mailing list