[PATCH 7/7] drm: adv7511: Add hpd_override_enable feature bit to struct adv7511_chip_info

Biju Das biju.das.jz at bp.renesas.com
Fri Aug 18 13:34:56 UTC 2023


Hi Adam Ford,

Thanks for the feedback.

> Subject: Re: [PATCH 7/7] drm: adv7511: Add hpd_override_enable feature bit
> to struct adv7511_chip_info
> 
> On Sun, Aug 13, 2023 at 1:06 PM Biju Das <biju.das.jz at bp.renesas.com>
> wrote:
> >
> > As per spec, it is allowed to pulse the HPD signal to indicate that
> > the EDID information has changed. Some monitors do this when they wake
> > up from standby or are enabled. When the HPD goes low the adv7511 is
> > reset and the outputs are disabled which might cause the monitor to go
> > to standby again. To avoid this we ignore the HPD pin for the first
> > few seconds after enabling the output. On the other hand,
> > adv7535 require to enable HPD Override bit for proper HPD.
> >
> > Add hpd_override_enable feature bit to struct adv7511_chip_info to
> > handle this scenario.
> >
> > While at it, drop the enum adv7511_type as it is unused.
> 
> It seems like dropping adv7511_type is unrelated to the rest of the patch,
> and I think it should be split from this into its own patch

With this patch, there is no user for adv7511_type that is the
reason it is added here. I thought that is the common practice.

Please correct me if that is not the case.

Cheers,
Biju

> 
> adam
> >
> > Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
> > ---
> >  drivers/gpu/drm/bridge/adv7511/adv7511.h     |  8 +-------
> >  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 +++++-------
> >  2 files changed, 6 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > index 627531f48f84..c523ac4c9bc8 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > @@ -325,22 +325,16 @@ struct adv7511_video_config {
> >         struct hdmi_avi_infoframe avi_infoframe;  };
> >
> > -enum adv7511_type {
> > -       ADV7511,
> > -       ADV7533,
> > -       ADV7535,
> > -};
> > -
> >  #define ADV7511_MAX_ADDRS 3
> >
> >  struct adv7511_chip_info {
> > -       enum adv7511_type type;
> >         unsigned long max_mode_clock;
> >         unsigned long max_lane_freq;
> >         const char * const *supply_names;
> >         unsigned int num_supplies;
> >         unsigned has_dsi:1;
> >         unsigned link_config:1;
> > +       unsigned hpd_override_enable:1;
> >  };
> >
> >  struct adv7511 {
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > index 6974c267b1d5..7b06a0a21685 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > @@ -354,7 +354,7 @@ static void __adv7511_power_on(struct adv7511
> *adv7511)
> >          * first few seconds after enabling the output. On the other hand
> >          * adv7535 require to enable HPD Override bit for proper HPD.
> >          */
> > -       if (adv7511->info->type == ADV7535)
> > +       if (adv7511->info->hpd_override_enable)
> >                 regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
> >                                    ADV7535_REG_POWER2_HPD_OVERRIDE,
> >                                    ADV7535_REG_POWER2_HPD_OVERRIDE);
> > @@ -381,7 +381,7 @@ static void adv7511_power_on(struct adv7511
> > *adv7511)  static void __adv7511_power_off(struct adv7511 *adv7511)  {
> >         /* TODO: setup additional power down modes */
> > -       if (adv7511->info->type == ADV7535)
> > +       if (adv7511->info->hpd_override_enable)
> >                 regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
> >                                    ADV7535_REG_POWER2_HPD_OVERRIDE,
> > 0);
> >
> > @@ -682,7 +682,7 @@ adv7511_detect(struct adv7511 *adv7511, struct
> drm_connector *connector)
> >                         status = connector_status_disconnected;
> >         } else {
> >                 /* Renable HPD sensing */
> > -               if (adv7511->info->type == ADV7535)
> > +               if (adv7511->info->hpd_override_enable)
> >                         regmap_update_bits(adv7511->regmap,
> ADV7511_REG_POWER2,
> >
> ADV7535_REG_POWER2_HPD_OVERRIDE,
> >
> > ADV7535_REG_POWER2_HPD_OVERRIDE); @@ -1360,14 +1360,12 @@ static void
> > adv7511_remove(struct i2c_client *i2c)  }
> >
> >  static const struct adv7511_chip_info adv7511_chip_info = {
> > -       .type = ADV7511,
> >         .supply_names = adv7511_supply_names,
> >         .num_supplies = ARRAY_SIZE(adv7511_supply_names),
> >         .link_config = 1
> >  };
> >
> >  static const struct adv7511_chip_info adv7533_chip_info = {
> > -       .type = ADV7533,
> >         .max_mode_clock = 80000,
> >         .max_lane_freq = 800000,
> >         .supply_names = adv7533_supply_names, @@ -1376,12 +1374,12 @@
> > static const struct adv7511_chip_info adv7533_chip_info = {  };
> >
> >  static const struct adv7511_chip_info adv7535_chip_info = {
> > -       .type = ADV7535,
> >         .max_mode_clock = 148500,
> >         .max_lane_freq = 891000,
> >         .supply_names = adv7533_supply_names,
> >         .num_supplies = ARRAY_SIZE(adv7533_supply_names),
> > -       .has_dsi = 1
> > +       .has_dsi = 1,
> > +       .hpd_override_enable = 1
> >  };
> >
> >  static const struct i2c_device_id adv7511_i2c_ids[] = {
> > --
> > 2.25.1
> >


More information about the dri-devel mailing list