[PATCH 3/5] drm/bridge: samsung-dsim: update PLL reference clock

[Adam Ford]

On Mon, Aug 28, 2023 at 11:42 AM Marco Felsch <m.felsch at pengutronix.de> wrote:
>
> On 23-08-28, Michael Tretter wrote:
> > The PLL requires a clock between 2 MHz and 30 MHz after the pre-divider.
> > The reference clock for the PLL may change due to changes to it's parent
> > clock. Thus, the frequency may be out of range or unsuited for
> > generating the high speed clock for MIPI DSI.
> >
> > Try to keep the pre-devider small, and set the reference clock close to
> > 30 MHz before recalculating the PLL configuration. Use a divider with a
> > power of two for the reference clock as this seems to work best in
> > my tests.
> >
> > Signed-off-by: Michael Tretter <m.tretter at pengutronix.de>
> > ---
> >  drivers/gpu/drm/bridge/samsung-dsim.c | 15 +++++++++++++--
> >  1 file changed, 13 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
> > index da90c2038042..4de6e4f116db 100644
> > --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> > +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> > @@ -611,10 +611,21 @@ static unsigned long samsung_dsim_set_pll(struct samsung_dsim *dsi,
> >       u16 m;
> >       u32 reg;
> >
> > -     if (dsi->pll_clk)
> > +     if (dsi->pll_clk) {
> > +             /*
> > +              * Ensure that the reference clock is generated with a power of
> > +              * two divider from its parent, but close to the PLLs upper
> > +              * limit of the valid range of 2 MHz to 30 MHz.
> > +              */
> > +             fin = clk_get_rate(clk_get_parent(dsi->pll_clk));
> > +             while (fin > 30 * MHZ)
> > +                     fin = fin / 2;
>
> Really just a cosmetic nit: fin /= 2;
>
> Reviewed-by: Marco Felsch <m.felsch at pengutronix.de>
>
> > +             clk_set_rate(dsi->pll_clk, fin);
> > +
> >               fin = clk_get_rate(dsi->pll_clk);
> > -     else
> > +     } else {
> >               fin = dsi->pll_clk_rate;
> > +     }

I don't have all the code style rules memorized.  Did you run it
through checkpatch?  I wonder if the braces here are appropriate for a
1-line after the else.  If checkpatch is happy, I am fine with it.

adam
> >       dev_dbg(dsi->dev, "PLL ref clock freq %lu\n", fin);
> >
> >       fout = samsung_dsim_pll_find_pms(dsi, fin, freq, &p, &m, &s);
> >
> > --
> > 2.39.2
> >
> >
> >