[PATCH 3/7] drm: adv7511: Add max_lane_freq variable to struct adv7511_chip_info

Laurent Pinchart laurent.pinchart at ideasonboard.com
Tue Aug 29 07:25:19 UTC 2023


Hi Biju,

Thank you for the patch.

On Sun, Aug 13, 2023 at 07:05:08PM +0100, Biju Das wrote:
> The ADV7533 supports a maximum lane clock of 800MHz whereas it is 891MHz
> for ADV7535.  Add max_lane_freq variable to struct adv7511_chip_info to
> handle this difference.
> 
> While at it, drop the unused local variable max_lane_freq.
> 
> Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
> ---
>  drivers/gpu/drm/bridge/adv7511/adv7511.h     | 1 +
>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 ++++--
>  drivers/gpu/drm/bridge/adv7511/adv7533.c     | 5 +----
>  3 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> index f8190442ffca..0e2c721a856f 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> @@ -336,6 +336,7 @@ enum adv7511_type {
>  struct adv7511_chip_info {
>  	enum adv7511_type type;
>  	unsigned long max_mode_clock;
> +	unsigned long max_lane_freq;

Same comment as for patch 2/7, you could name the field
max_lane_freq_khz. An unsigned int may be enough too if the calculation
below doesn't overflow.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>

>  };
>  
>  struct adv7511 {
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index 193b2d5bc7e6..29e087e6d721 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -1372,12 +1372,14 @@ static const struct adv7511_chip_info adv7511_chip_info = {
>  
>  static const struct adv7511_chip_info adv7533_chip_info = {
>  	.type = ADV7533,
> -	.max_mode_clock = 80000
> +	.max_mode_clock = 80000,
> +	.max_lane_freq = 800000,
>  };
>  
>  static const struct adv7511_chip_info adv7535_chip_info = {
>  	.type = ADV7535,
> -	.max_mode_clock = 148500
> +	.max_mode_clock = 148500,
> +	.max_lane_freq = 891000,
>  };
>  
>  static const struct i2c_device_id adv7511_i2c_ids[] = {
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c
> index e92b27e0afd1..c1e744d4f2b1 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7533.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c
> @@ -103,7 +103,6 @@ void adv7533_dsi_power_off(struct adv7511 *adv)
>  enum drm_mode_status adv7533_mode_valid(struct adv7511 *adv,
>  					const struct drm_display_mode *mode)
>  {
> -	unsigned long max_lane_freq;
>  	struct mipi_dsi_device *dsi = adv->dsi;
>  	u8 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
>  
> @@ -112,9 +111,7 @@ enum drm_mode_status adv7533_mode_valid(struct adv7511 *adv,
>  		return MODE_CLOCK_HIGH;
>  
>  	/* Check max clock for each lane */
> -	max_lane_freq = (adv->info->type == ADV7533 ? 800000 : 891000);
> -
> -	if (mode->clock * bpp > max_lane_freq * adv->num_dsi_lanes)
> +	if (mode->clock * bpp > adv->info->max_lane_freq * adv->num_dsi_lanes)
>  		return MODE_CLOCK_HIGH;
>  
>  	return MODE_OK;

-- 
Regards,

Laurent Pinchart


More information about the dri-devel mailing list