[PATCH 6/7] drm/msm/dp: Inline dp_link_parse_sink_count()
Kuogee Hsieh
quic_khsieh at quicinc.com
Thu Aug 31 20:29:26 UTC 2023
On 8/29/2023 11:47 AM, Stephen Boyd wrote:
> The function dp_link_parse_sink_count() is really just
> drm_dp_read_sink_count(). It debug prints out the bit for content
> protection (DP_SINK_CP_READY), but that is not useful beyond debug
> because 'link->dp_link.sink_count' is overwritten to only contain the
> sink_count in this same function. Just use drm_dp_read_sink_count() in
> the one place this function is called to simplify.
>
> Cc: Vinod Polimera <quic_vpolimer at quicinc.com>
> Cc: Kuogee Hsieh <quic_khsieh at quicinc.com>
> Signed-off-by: Stephen Boyd <swboyd at chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
> ---
> drivers/gpu/drm/msm/dp/dp_link.c | 38 +++-----------------------------
> 1 file changed, 3 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
> index 42427129acea..94a37914a47f 100644
> --- a/drivers/gpu/drm/msm/dp/dp_link.c
> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
> @@ -712,49 +712,17 @@ static int dp_link_parse_request(struct dp_link_private *link)
> return ret;
> }
>
> -/**
> - * dp_link_parse_sink_count() - parses the sink count
> - * @dp_link: pointer to link module data
> - *
> - * Parses the DPCD to check if there is an update to the sink count
> - * (Byte 0x200), and whether all the sink devices connected have Content
> - * Protection enabled.
> - */
> -static int dp_link_parse_sink_count(struct dp_link *dp_link)
> -{
> - ssize_t rlen;
> - bool cp_ready;
> -
> - struct dp_link_private *link = container_of(dp_link,
> - struct dp_link_private, dp_link);
> -
> - rlen = drm_dp_dpcd_readb(link->aux, DP_SINK_COUNT,
> - &link->dp_link.sink_count);
> - if (rlen < 0) {
> - DRM_ERROR("sink count read failed. rlen=%zd\n", rlen);
> - return rlen;
> - }
> -
> - cp_ready = link->dp_link.sink_count & DP_SINK_CP_READY;
> -
> - link->dp_link.sink_count =
> - DP_GET_SINK_COUNT(link->dp_link.sink_count);
> -
> - drm_dbg_dp(link->drm_dev, "sink_count = 0x%x, cp_ready = 0x%x\n",
> - link->dp_link.sink_count, cp_ready);
> - return 0;
> -}
> -
> static int dp_link_parse_sink_status_field(struct dp_link_private *link)
> {
> - int len = 0;
> + int len;
>
> link->prev_sink_count = link->dp_link.sink_count;
> - len = dp_link_parse_sink_count(&link->dp_link);
> + len = drm_dp_read_sink_count(link->aux);
> if (len < 0) {
> DRM_ERROR("DP parse sink count failed\n");
> return len;
> }
> + link->dp_link.sink_count = len;
>
> len = drm_dp_dpcd_read_link_status(link->aux,
> link->link_status);
More information about the dri-devel
mailing list