[PATCH 11/16] drm/msm/dpu: add an API to setup the CDM block for writeback
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Dec 1 07:20:26 UTC 2023
On Fri, 1 Dec 2023 at 02:41, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>
>
>
> On 8/30/2023 5:11 PM, Dmitry Baryshkov wrote:
> > On Thu, 31 Aug 2023 at 01:50, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
> >>
> >> Add an API dpu_encoder_helper_phys_setup_cdm() which can be used by
> >> the writeback encoder to setup the CDM block.
> >>
> >> Currently, this is defined and used within the writeback's physical
> >> encoder layer however, the function can be modified to be used to setup
> >> the CDM block even for non-writeback interfaces.
> >>
> >> Until those modifications are planned and made, keep it local to
> >> writeback.
> >>
> >> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
> >> ---
> >> .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 3 +
> >> .../drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 123 +++++++++++++++++-
> >> 2 files changed, 125 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> >> index 510c1c41ddbc..93a8ae67beff 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> >> @@ -16,6 +16,7 @@
> >> #include "dpu_hw_pingpong.h"
> >> #include "dpu_hw_ctl.h"
> >> #include "dpu_hw_top.h"
> >> +#include "dpu_hw_cdm.h"
> >> #include "dpu_encoder.h"
> >> #include "dpu_crtc.h"
> >>
> >> @@ -209,6 +210,7 @@ static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys)
> >> * @wbirq_refcount: Reference count of writeback interrupt
> >> * @wb_done_timeout_cnt: number of wb done irq timeout errors
> >> * @wb_cfg: writeback block config to store fb related details
> >> + * @cdm_cfg: cdm block config needed to store writeback block's CDM configuration
> >> * @wb_conn: backpointer to writeback connector
> >> * @wb_job: backpointer to current writeback job
> >> * @dest: dpu buffer layout for current writeback output buffer
> >> @@ -218,6 +220,7 @@ struct dpu_encoder_phys_wb {
> >> atomic_t wbirq_refcount;
> >> int wb_done_timeout_cnt;
> >> struct dpu_hw_wb_cfg wb_cfg;
> >> + struct dpu_hw_cdm_cfg cdm_cfg;
> >> struct drm_writeback_connector *wb_conn;
> >> struct drm_writeback_job *wb_job;
> >> struct dpu_hw_fmt_layout dest;
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
> >> index 4c2736c3ee6d..11935aac9fd5 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
> >> @@ -24,6 +24,20 @@
> >> #define to_dpu_encoder_phys_wb(x) \
> >> container_of(x, struct dpu_encoder_phys_wb, base)
> >>
> >> +#define TO_S15D16(_x_)((_x_) << 7)
> >> +
> >> +static struct dpu_csc_cfg dpu_encoder_phys_wb_rgb2yuv_601l = {
> >> + {
> >> + TO_S15D16(0x0083), TO_S15D16(0x0102), TO_S15D16(0x0032),
> >> + TO_S15D16(0x1fb5), TO_S15D16(0x1f6c), TO_S15D16(0x00e1),
> >> + TO_S15D16(0x00e1), TO_S15D16(0x1f45), TO_S15D16(0x1fdc)
> >> + },
> >> + { 0x00, 0x00, 0x00 },
> >> + { 0x0040, 0x0200, 0x0200 },
> >> + { 0x000, 0x3ff, 0x000, 0x3ff, 0x000, 0x3ff },
> >> + { 0x040, 0x3ac, 0x040, 0x3c0, 0x040, 0x3c0 },
> >> +};
> >
> > Nit: we probably need to have a single place with all dpu_csc_cfg entries.
> >
>
> hmmm ... so we have YUV2RGB matrices for dpu plane and RGB2YUV matrices
> for WB and DP.
>
> We can move all this to dpu_hw_util.c but lets do that in the DP series
> as that completes the consumer list of these matrices.
Doing it earlier is usually better. Can we please do it as a part of
this series?
>
> >> +
> >> /**
> >> * dpu_encoder_phys_wb_is_master - report wb always as master encoder
> >> * @phys_enc: Pointer to physical encoder
> >> @@ -225,6 +239,112 @@ static void dpu_encoder_phys_wb_setup_ctl(struct dpu_encoder_phys *phys_enc)
> >> }
> >> }
> >>
> >> +/**
> >> + * dpu_encoder_phys_wb_setup_cdp - setup chroma down sampling block
> >> + * @phys_enc:Pointer to physical encoder
> >> + */
> >> +static void dpu_encoder_helper_phys_setup_cdm(struct dpu_encoder_phys *phys_enc)
> >> +{
> >> + struct dpu_hw_cdm *hw_cdm;
> >> + struct dpu_hw_cdm_cfg *cdm_cfg;
> >> + struct dpu_hw_pingpong *hw_pp;
> >> + struct dpu_encoder_phys_wb *wb_enc;
> >> + const struct msm_format *format;
> >> + const struct dpu_format *dpu_fmt;
> >> + struct drm_writeback_job *wb_job;
> >> + int ret;
> >> +
> >> + if (!phys_enc)
> >> + return;
> >> +
> >> + wb_enc = to_dpu_encoder_phys_wb(phys_enc);
> >> + cdm_cfg = &wb_enc->cdm_cfg;
> >> + hw_pp = phys_enc->hw_pp;
> >> + hw_cdm = phys_enc->hw_cdm;
> >> + wb_job = wb_enc->wb_job;
> >> +
> >> + format = msm_framebuffer_format(wb_enc->wb_job->fb);
> >> + dpu_fmt = dpu_get_dpu_format_ext(format->pixel_format, wb_job->fb->modifier);
> >> +
> >> + if (!hw_cdm)
> >> + return;
> >> +
> >> + if (!DPU_FORMAT_IS_YUV(dpu_fmt)) {
> >> + DPU_DEBUG("[enc:%d] cdm_disable fmt:%x\n", DRMID(phys_enc->parent),
> >> + dpu_fmt->base.pixel_format);
> >> + if (hw_cdm->ops.disable)
> >> + hw_cdm->ops.disable(hw_cdm);
> >> +
> >> + return;
> >> + }
> >> +
> >> + memset(cdm_cfg, 0, sizeof(struct dpu_hw_cdm_cfg));
> >> +
> >> + cdm_cfg->output_width = wb_job->fb->width;
> >> + cdm_cfg->output_height = wb_job->fb->height;
> >> + cdm_cfg->output_fmt = dpu_fmt;
> >> + cdm_cfg->output_type = CDM_CDWN_OUTPUT_WB;
> >> + cdm_cfg->output_bit_depth = DPU_FORMAT_IS_DX(dpu_fmt) ?
> >> + CDM_CDWN_OUTPUT_10BIT : CDM_CDWN_OUTPUT_8BIT;
> >> +
> >> + /* enable 10 bit logic */
> >> + switch (cdm_cfg->output_fmt->chroma_sample) {
> >> + case DPU_CHROMA_RGB:
> >> + cdm_cfg->h_cdwn_type = CDM_CDWN_DISABLE;
> >> + cdm_cfg->v_cdwn_type = CDM_CDWN_DISABLE;
> >> + break;
> >> + case DPU_CHROMA_H2V1:
> >> + cdm_cfg->h_cdwn_type = CDM_CDWN_COSITE;
> >> + cdm_cfg->v_cdwn_type = CDM_CDWN_DISABLE;
> >> + break;
> >> + case DPU_CHROMA_420:
> >> + cdm_cfg->h_cdwn_type = CDM_CDWN_COSITE;
> >> + cdm_cfg->v_cdwn_type = CDM_CDWN_OFFSITE;
> >> + break;
> >> + case DPU_CHROMA_H1V2:
> >> + default:
> >> + DPU_ERROR("[enc:%d] unsupported chroma sampling type\n",
> >> + DRMID(phys_enc->parent));
> >> + cdm_cfg->h_cdwn_type = CDM_CDWN_DISABLE;
> >> + cdm_cfg->v_cdwn_type = CDM_CDWN_DISABLE;
> >> + break;
> >> + }
> >> +
> >> + DPU_DEBUG("[enc:%d] cdm_enable:%d,%d,%X,%d,%d,%d,%d]\n",
> >> + DRMID(phys_enc->parent), cdm_cfg->output_width,
> >> + cdm_cfg->output_height, cdm_cfg->output_fmt->base.pixel_format,
> >> + cdm_cfg->output_type, cdm_cfg->output_bit_depth,
> >> + cdm_cfg->h_cdwn_type, cdm_cfg->v_cdwn_type);
> >> +
> >> + if (hw_cdm && hw_cdm->ops.setup_csc_data) {
> >> + ret = hw_cdm->ops.setup_csc_data(hw_cdm, &dpu_encoder_phys_wb_rgb2yuv_601l);
> >> + if (ret < 0) {
> >> + DPU_ERROR("[enc:%d] failed to setup CSC; ret:%d\n",
> >> + DRMID(phys_enc->parent), ret);
> >> + return;
> >> + }
> >> + }
> >> +
> >> + if (hw_cdm && hw_cdm->ops.setup_cdwn) {
> >
> > You have checked for (!hw_cdm) several lines above. We can drop this
> > condition here.
> >
>
> Ack.
>
> >> + ret = hw_cdm->ops.setup_cdwn(hw_cdm, cdm_cfg);
> >> + if (ret < 0) {
> >> + DPU_ERROR("[enc:%d] failed to setup CDWN; ret:%d\n",
> >> + DRMID(phys_enc->parent), ret);
> >> + return;
> >> + }
> >> + }
> >> +
> >> + if (hw_cdm && hw_pp && hw_cdm->ops.enable) {
> >
> > And what if !hw_pp ? Can it happen here? No, if I understand correctly.
> >
>
> I dont see any other protection for !hw_pp in this flow so would prefer
> to keep it.
But can we end up in this function if we have no hw_pp at all?
>
> >> + cdm_cfg->pp_id = hw_pp->idx;
> >> + ret = hw_cdm->ops.enable(hw_cdm, cdm_cfg);
> >
> > As we are calling these three ops in a row, can we merge them together
> > into a single callback to be called from dpu_encoder.c?
> >
>
> Good idea. I can add a csc_cfg entry to cdm_cfg and merge all three into
> the enable() op itself and drop the other two.
>
> >> + if (ret < 0) {
> >> + DPU_ERROR("[enc:%d] failed to enable CDM; ret:%d\n",
> >> + DRMID(phys_enc->parent), ret);
> >> + return;
> >> + }
> >> + }
> >> +}
> >> +
> >> /**
> >> * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic states
> >> * @phys_enc: Pointer to physical encoder
> >> @@ -348,8 +468,9 @@ static void dpu_encoder_phys_wb_setup(
> >>
> >> dpu_encoder_phys_wb_setup_fb(phys_enc, fb);
> >>
> >> - dpu_encoder_phys_wb_setup_ctl(phys_enc);
> >> + dpu_encoder_helper_phys_setup_cdm(phys_enc);
> >>
> >> + dpu_encoder_phys_wb_setup_ctl(phys_enc);
> >> }
> >>
> >> static void _dpu_encoder_phys_wb_frame_done_helper(void *arg)
> >> --
> >> 2.40.1
> >>
> >
> >
--
With best wishes
Dmitry
More information about the dri-devel
mailing list