[PATCH 10/16] drm/msm/dpu: add support to disable CDM block during encoder cleanup
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Dec 1 08:36:01 UTC 2023
On Fri, 1 Dec 2023 at 01:58, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>
>
>
> On 8/30/2023 5:14 PM, Dmitry Baryshkov wrote:
> > On Thu, 31 Aug 2023 at 01:50, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
> >>
> >> In preparation of setting up CDM block, add the logic to disable it
> >> properly during encoder cleanup.
> >>
> >> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
> >> ---
> >> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 8 ++++++++
> >> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 2 ++
> >> 2 files changed, 10 insertions(+)
> >>
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> >> index 582680804016..1b1e07292a9e 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> >> @@ -26,6 +26,7 @@
> >> #include "dpu_hw_dspp.h"
> >> #include "dpu_hw_dsc.h"
> >> #include "dpu_hw_merge3d.h"
> >> +#include "dpu_hw_cdm.h"
> >> #include "dpu_formats.h"
> >> #include "dpu_encoder_phys.h"
> >> #include "dpu_crtc.h"
> >> @@ -2097,6 +2098,13 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
> >> phys_enc->hw_pp->merge_3d->idx);
> >> }
> >>
> >> + if (phys_enc->hw_cdm && phys_enc->hw_cdm->ops.bind_pingpong_blk && phys_enc->hw_pp) {
> >> + phys_enc->hw_cdm->ops.bind_pingpong_blk(phys_enc->hw_cdm,
> >> + false, phys_enc->hw_pp->idx);
> >
> > But it was already bound in the cdm->enable, wasn't it?
Yes :-(
> >
>
> This is disable. I think you missed the "false" parameter.
>
> > Also the update_pending_flush_cdm should be called even for DPU < 5.0,
> > where there should be no bind_pingpong_blk callback.
> >
>
> Ack. This is a good catch!
>
> >> + if (phys_enc->hw_ctl->ops.update_pending_flush_cdm)
> >> + phys_enc->hw_ctl->ops.update_pending_flush_cdm(phys_enc->hw_ctl);
> >> + }
> >> +
> >> if (dpu_enc->dsc) {
> >> dpu_encoder_unprep_dsc(dpu_enc);
> >> dpu_enc->dsc = NULL;
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> >> index 24dbc28be4f8..510c1c41ddbc 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> >> @@ -150,6 +150,7 @@ enum dpu_intr_idx {
> >> * @hw_pp: Hardware interface to the ping pong registers
> >> * @hw_intf: Hardware interface to the intf registers
> >> * @hw_wb: Hardware interface to the wb registers
> >> + * @hw_cdm: Hardware interface to the CDM registers
> >> * @dpu_kms: Pointer to the dpu_kms top level
> >> * @cached_mode: DRM mode cached at mode_set time, acted on in enable
> >> * @enabled: Whether the encoder has enabled and running a mode
> >> @@ -178,6 +179,7 @@ struct dpu_encoder_phys {
> >> struct dpu_hw_pingpong *hw_pp;
> >> struct dpu_hw_intf *hw_intf;
> >> struct dpu_hw_wb *hw_wb;
> >> + struct dpu_hw_cdm *hw_cdm;
> >> struct dpu_kms *dpu_kms;
> >> struct drm_display_mode cached_mode;
> >> enum dpu_enc_split_role split_role;
> >> --
> >> 2.40.1
> >>
> >
> >
--
With best wishes
Dmitry
More information about the dri-devel
mailing list