[RFC PATCH 0/6] Supporting GMEM (generalized memory management) for external memory devices
Christian König
christian.koenig at amd.com
Fri Dec 1 13:16:31 UTC 2023
Am 01.12.23 um 06:48 schrieb Zeng, Oak:
> [SNIP]
>> 3. MMU notifiers register hooks at certain core MM events, while GMEM
>> declares basic functions and internally invokes them. GMEM requires less from
>> the driver side -- no need to understand what core MM behaves at certain MMU
>> events. GMEM also expects fewer bugs than MMU notifiers: implementing basic
>> operations with standard declarations vs. implementing whatever random device
>> MM logic in MMU notifiers.
> This seems true to me. I feel the mmu notifier thing, especially the synchronization/lock design (those sequence numbers, interacting with driver lock, and the mmap lock) are very complicated. I indeed spent time to understand the specification documented in hmm.rst...
>
> Your approach seems better.
I have to agree on that as well. HMM/MMU notifiers are developed with
exposing MM functionality in mind instead of trying to fulfill driver
requirements.
But this originated not in HMM/MMU notifiers, rather it was a
requirement to not change the CPU side of the MM code to much.
So when you can get the acknowledgement to make changes to the CPU side
of the MM code to better handle device driver requirements then I'm
totally in favor of this.
It's just that I don't think the approach of starting with a new
framework/idea will help with that. Instead rather try to improve the
existing functionality.
>> 5. GMEM has been demonstrated to allow device memory oversubscription (a
>> GMEM-based 32GB NPU card can run a GPT model oversubscribing 500GB host
>> DDR), while drivers using HMM/MMU notifier must implement this logic one by
>> one. I will submit this part in a future RFC patch.
> When device memory is oversubscribed, do you call a driver callback function to evict device memory to system memory? Or just cpu copy? Copy with device's fast copy engine is faster.
>
> I can see even though with both approach we need to implement a driver copy function, with your approach, the driver logic can be simplified. With today's drm/ttm, I do see the logic in the memory eviction area is very complicated. Those eviction fence (some call it suspend fence), dma-fence enable signalling....very complicated to me.
>
> Essentially evict device memory to system memory is nothing different from evict system memory to disk... so if your approach can leverage some linux core mm eviction logic, I do see it can simplify things here...
We actually already do this in TTM as well through the MM shrinkers.
It's just that it's an intentional design decision to make the whole
thing asynchronously using dma_fence etc... That's why you have this
complexity in there.
>> I want to reiterate that GMEM's shared address space support is a bonus result,
>> not a main contribution... It was done because it was not difficult to implement
>> internal CPU-device coordination mechanism when core MM is extended by
>> GMEM to support devices.
> Besides memory eviction/oversubscription, there are a few other pain points when I use hmm:
>
> 1) hmm doesn't support file-back memory, so it is hard to share memory b/t process in a gpu environment. You mentioned you have a plan... How hard is it to support file-backed in your approach?
As hard as it is to support it through HMM. That's what I meant that
this approach doesn't integrate well, as far as I know the problem isn't
inside HMM or any other solution but rather in the file system layer.
Regards,
Christian.
> 2)virtual address range based memory attribute/hint: with hmadvise, where do you save the memory attribute of a virtual address range? Do you need to extend vm_area_struct to save it? With hmm, we have to maintain such information at driver. This ends up with pretty complicated logic to split/merge those address range. I know core mm has similar logic to split/merge vma...
>
> Oak
>
>
>> -Weixi
>>
>> -----Original Message-----
>> From: Christian König<ckoenig.leichtzumerken at gmail.com>
>> Sent: Thursday, November 30, 2023 4:28 PM
>> To: Zeng, Oak<oak.zeng at intel.com>; Christian König
>> <christian.koenig at amd.com>; zhuweixi<weixi.zhu at huawei.com>; linux-
>> mm at kvack.org;linux-kernel at vger.kernel.org;akpm at linux-foundation.org;
>> Danilo Krummrich<dakr at redhat.com>; Dave Airlie<airlied at redhat.com>; Daniel
>> Vetter<daniel at ffwll.ch>
>> Cc:intel-gvt-dev at lists.freedesktop.org;rcampbell at nvidia.com;
>> mhairgrove at nvidia.com;jgg at nvidia.com;weixi.zhu at openeuler.sh;
>> jhubbard at nvidia.com;intel-gfx at lists.freedesktop.org;apopple at nvidia.com;
>> Xinhui.Pan at amd.com;amd-gfx at lists.freedesktop.org;
>> tvrtko.ursulin at linux.intel.com;ogabbay at kernel.org;jglisse at redhat.com; dri-
>> devel at lists.freedesktop.org;ziy at nvidia.com; Vivi, Rodrigo
>> <rodrigo.vivi at intel.com>;alexander.deucher at amd.com;leonro at nvidia.com;
>> Felix.Kuehling at amd.com; Wang, Zhi A<zhi.a.wang at intel.com>;
>> mgorman at suse.de
>> Subject: Re: [RFC PATCH 0/6] Supporting GMEM (generalized memory
>> management) for external memory devices
>>
>> Hi Oak,
>>
>> yeah, #4 is indeed a really good point and I think Felix will agree to that as well.
>>
>> HMM is basically still missing a way to advise device attributes for the CPU
>> address space. Both migration strategy as well as device specific information (like
>> cache preferences) fall into this category.
>>
>> Since there is a device specific component in those attributes as well I think
>> device specific IOCTLs still make sense to update them, but HMM should offer
>> the functionality to manage and store those information.
>>
>> Split and merge of VMAs only become a problem if you attach those information
>> to VMAs, if you keep them completely separate than that doesn't become an
>> issue either. The down side of this approach is that you don't get automatically
>> extending attribute ranges for growing VMAs for example.
>>
>> Regards,
>> Christian.
>>
>> Am 29.11.23 um 23:23 schrieb Zeng, Oak:
>>> Hi Weixi,
>>>
>>> Even though Christian has listed reasons rejecting this proposal (yes they are
>> very reasonable to me), I would open my mind and further explore the possibility
>> here. Since the current GPU driver uses a hmm based implementation (AMD and
>> NV has done this; At Intel we are catching up), I want to explore how much we
>> can benefit from the proposed approach and how your approach can solve some
>> pain points of our development. So basically what I am questioning here is: what
>> is the advantage of your approach against hmm.
>>> To implement a UVM (unified virtual address space b/t cpu and gpu device),
>> with hmm, driver essentially need to implement below functions:
>>> 1. device page table update. Your approach requires the same because
>>> this is device specific codes
>>>
>>> 2. Some migration functions to migrate memory b/t system memory and GPU
>> local memory. My understanding is, even though you generalized this a bit, such
>> as modified cpu page fault path, provided "general" gm_dev_fault handler... but
>> device driver still need to provide migration functions because migration
>> functions have to be device specific (i.e., using device dma/copy engine for
>> performance purpose). Right?
>>> 3. GPU physical memory management, this part is now in drm/buddy, shared
>> by all drivers. I think with your approach, driver still need to provide callback
>> functions to allocate/free physical pages. Right? Or do you let linux core mm
>> buddy manage device memory directly?
>>> 4. madvise/hints/virtual address range management. This has been pain point
>> for us. Right now device driver has to maintain certain virtual address range data
>> structure to maintain hints and other virtual address range based memory
>> attributes. Driver need to sync with linux vma. Driver need to explicitly deal with
>> range split/merging... HMM doesn't provide support in this area. Your approach
>> seems cleaner/simpler to me...
>>>
>>> So in above, I have examined the some key factors of a gpu UVM memory
>> manager. I think for #1 and #2, hmm has provide pretty good abstraction/tools
>> for address space mirroring and migration helpers. For #3, since we have a
>> common drm/buddy layer, I don't think it is a big problem for driver writer now.
>>> I do see #4 is something you solved more beautifully, requires new system call
>> though.
>>> Oak
>>>
>>>
>>>> -----Original Message-----
>>>> From: dri-devel<dri-devel-bounces at lists.freedesktop.org> On Behalf
>>>> Of Christian König
>>>> Sent: Tuesday, November 28, 2023 8:09 AM
>>>> To: Weixi Zhu<weixi.zhu at huawei.com>;linux-mm at kvack.org; linux-
>>>> kernel at vger.kernel.org;akpm at linux-foundation.org; Danilo Krummrich
>>>> <dakr at redhat.com>; Dave Airlie<airlied at redhat.com>; Daniel Vetter
>>>> <daniel at ffwll.ch>
>>>> Cc:dri-devel at lists.freedesktop.org;leonro at nvidia.com;
>>>> apopple at nvidia.com;amd-gfx at lists.freedesktop.org;mgorman at suse.de;
>>>> ziy at nvidia.com; Wang, Zhi A<zhi.a.wang at intel.com>;
>>>> rcampbell at nvidia.com;jgg at nvidia.com;weixi.zhu at openeuler.sh;
>>>> jhubbard at nvidia.com;intel-gfx at lists.freedesktop.org;
>>>> mhairgrove at nvidia.com;jglisse at redhat.com; Vivi, Rodrigo
>>>> <rodrigo.vivi at intel.com>;intel-gvt-dev at lists.freedesktop.org;
>>>> tvrtko.ursulin at linux.intel.com;Felix.Kuehling at amd.com;
>>>> Xinhui.Pan at amd.com;alexander.deucher at amd.com;ogabbay at kernel.org
>>>> Subject: Re: [RFC PATCH 0/6] Supporting GMEM (generalized memory
>>>> management) for external memory devices
>>>>
>>>> Adding a few missing important people to the explicit to list.
>>>>
>>>> Am 28.11.23 um 13:50 schrieb Weixi Zhu:
>>>>> The problem:
>>>>>
>>>>> Accelerator driver developers are forced to reinvent external MM
>>>>> subsystems case by case, because Linux core MM only considers host
>> memory resources.
>>>>> These reinvented MM subsystems have similar orders of magnitude of
>>>>> LoC as Linux MM (80K), e.g. Nvidia-UVM has 70K, AMD GPU has 14K and
>>>>> Huawei NPU
>>>> has
>>>>> 30K. Meanwhile, more and more vendors are implementing their own
>>>>> accelerators, e.g. Microsoft's Maia 100. At the same time,
>>>>> application-level developers suffer from poor programmability --
>>>>> they must consider parallel address spaces and be careful about the
>>>>> limited device DRAM capacity. This can be alleviated if a
>>>>> malloc()-ed virtual address can be shared by the accelerator, or the
>>>>> abundant host DRAM can further transparently backup the device local
>> memory.
>>>>> These external MM systems share similar mechanisms except for the
>>>>> hardware-dependent part, so reinventing them is effectively
>>>>> introducing redundant code (14K~70K for each case). Such
>>>>> developing/maintaining is not cheap. Furthermore, to share a
>>>>> malloc()-ed virtual address, device drivers need to deeply interact
>>>>> with Linux MM via low-level MM APIs, e.g. MMU notifiers/HMM. This
>>>>> raises the bar for driver development, since developers must
>>>>> understand how Linux MM works. Further, it creates code maintenance
>>>>> problems -- any changes to Linux MM potentially require coordinated
>> changes to accelerator drivers using low-level MM APIs.
>>>>> Putting a cache-coherent bus between host and device will not make
>>>>> these external MM subsystems disappear. For example, a
>>>>> throughput-oriented accelerator will not tolerate executing heavy
>>>>> memory access workload with a host MMU/IOMMU via a remote bus.
>>>>> Therefore, devices will still have their own MMU and pick a simpler
>>>>> page table format for lower address translation overhead, requiring external
>> MM subsystems.
>>>>> --------------------
>>>>>
>>>>> What GMEM (Generalized Memory Management [1]) does:
>>>>>
>>>>> GMEM extends Linux MM to share its machine-independent MM code. Only
>>>>> high-level interface is provided for device drivers. This prevents
>>>>> accelerator drivers from reinventing the wheel, but relies on
>>>>> drivers to implement their hardware-dependent functions declared by
>>>>> GMEM. GMEM's
>>>> key
>>>>> interface include gm_dev_create(), gm_as_create(), gm_as_attach()
>>>>> and gm_dev_register_physmem(). Here briefly describe how a device
>>>>> driver utilizes them:
>>>>> 1. At boot time, call gm_dev_create() and registers the implementation of
>>>>> hardware-dependent functions as declared in struct gm_mmu.
>>>>> - If the device has local DRAM, call gm_dev_register_physmem() to
>>>>> register available physical addresses.
>>>>> 2. When a device context is initialized (e.g. triggered by ioctl), check if
>>>>> the current CPU process has been attached to a gmem address space
>>>>> (struct gm_as). If not, call gm_as_create() and point current->mm->gm_as
>>>>> to it.
>>>>> 3. Call gm_as_attach() to attach the device context to a gmem address space.
>>>>> 4. Invoke gm_dev_fault() to resolve a page fault or prepare data before
>>>>> device computation happens.
>>>>>
>>>>> GMEM has changed the following assumptions in Linux MM:
>>>>> 1. An mm_struct not only handle a single CPU context, but may also handle
>>>>> external memory contexts encapsulated as gm_context listed in
>>>>> mm->gm_as. An external memory context can include a few or all of the
>>>>> following parts: an external MMU (that requires TLB invalidation), an
>>>>> external page table (that requires PTE manipulation) and external DRAM
>>>>> (that requires physical memory management).
>>>>> 2. Faulting a MAP_PRIVATE VMA with no CPU PTE found does not
>> necessarily
>>>>> mean that a zero-filled physical page should be mapped. The virtual
>>>>> page may have been mapped to an external memory device.
>>>>> 3. Unmapping a page may include sending device TLB invalidation (even if
>>>>> its MMU shares CPU page table) and manipulating device PTEs.
>>>>>
>>>>> --------------------
>>>>>
>>>>> Semantics of new syscalls:
>>>>>
>>>>> 1. mmap(..., MAP_PRIVATE | MAP_PEER_SHARED)
>>>>> Allocate virtual address that is shared between the CPU and all
>>>>> attached devices. Data is guaranteed to be coherent whenever the
>>>>> address is accessed by either CPU or any attached device. If the device
>>>>> does not support page fault, then device driver is responsible for
>>>>> faulting memory before data gets accessed. By default, the CPU DRAM is
>>>>> can be used as a swap backup for the device local memory.
>>>>> 2. hmadvise(NUMA_id, va_start, size, memory_hint)
>>>>> Issuing memory hint for a given VMA. This extends traditional madvise()
>>>>> syscall with an extra argument so that programmers have better control
>>>>> with heterogeneous devices registered as NUMA nodes. One
>>>>> useful
>>>> memory
>>>>> hint could be MADV_PREFETCH, which guarantees that the physical data
>> of
>>>>> the given VMA [VA, VA+size) is migrated to NUMA node #id. Another
>>>>> useful memory hint is MADV_DONTNEED. This is helpful to increase
>> device
>>>>> memory utilization. It is worth considering extending the existing
>>>>> madvise() syscall with one additional argument.
>>>>>
>>>>> --------------------
>>>>>
>>>>> Implementation details
>>>>>
>>>>> 1. New VMA flag: MAP_PEER_SHARED
>>>>>
>>>>> This new flag helps isolate GMEM feature, so that common processes
>>>>> with no device attached does not need to maintain any logical page
>>>>> table. It can be deleted if the extra overhead from GMEM is acceptable.
>>>>>
>>>>> 2. MMU functions
>>>>> The device driver must implement the MMU functions declared in
>>>>> struct gm_mmu.
>>>>>
>>>>> VA functions: peer_va_alloc_fixed(), peer_va_free()
>>>>>
>>>>> They are used to negotiate a common available VMA between a host
>>>>> process and a device process at the mmap() time. This is because
>>>>> some accelerators like Intel Xeon Phi or Huawei's Ascend NPU have
>>>>> their acceleration tasks executed within a device CPU process
>>>>> context. Some accelerators may also choose a different format of
>>>>> virtual address space.
>>>>>
>>>>> PA functions: alloc_page(), free_page(), prepare_page()
>>>>>
>>>>> Alloc_page() and free_page() are used to allocate and free device
>>>>> physical pages. Prepare_page() is used to zero-fill or DMA the data
>>>>> of a physical page. These functions were removed from the submitted
>>>>> patch, since GMEM does not need to invoke them when testing Huawei's
>>>>> NPU accelerator. The
>>>> NPU
>>>>> accelerator has an OS running in the device that manages the device
>>>>> physical memory. However, even for such a device it is better for
>>>>> the host to directly manage device physical memory, which saves
>>>>> device HBM and avoids synchronizing management status between the host
>> and device.
>>>>> Page-table functions:
>>>>> pmap_create()/destroy()/enter()/release()/protect()
>>>>>
>>>>> They are used to create and destroy device page tables, install and
>>>>> uninstall page table entries and to change the protection of page
>>>>> table entries.
>>>>>
>>>>> TLB-invalidation functions: tlb_invl(), tlb_invl_coalesced()
>>>>>
>>>>> They are used to invalidate the TLB entries of a given range of VA
>>>>> or invalidate a given list of VMAs.
>>>>>
>>>>> Wrapper functions: peer_map() and peer_unmap()
>>>>>
>>>>> These two functions are used to create or destroy a device mapping
>>>>> which could include allocating physical memory and copying data.
>>>>> They effectively wraps the PA functions, Page-table functions and
>>>>> TLB-invalidation functions. Implementing these steps together allows
>>>>> devices to optimize the communication cost between host and device.
>>>>> However, it requires the device driver to correctly order these steps.
>>>>>
>>>>> 3. Tracking logical mappings:
>>>>>
>>>>> Each process starts maintaining an xarray in
>>>>> mm->vm_obj->logical_page_table at the first time a host process
>>>>> calls mmap(MAP_PRIVATE |
>>>> MAP_PEER_SHARED).
>>>>> When a virtual page gets touched, its mapping status is created and
>>>>> stored in struct gm_mapping. The logical page table is utilized to
>>>>> query the struct gm_mapping given a virtual address. GMEM extends
>>>>> Linux MM to
>>>> update
>>>>> and lookup these logical mappings. For example, in the patch set we
>>>>> modify the page fault path of to additionally check the logical
>>>>> mapping of MAP_PEER_SHARED VMAs and identify if a device page should
>> be migrated.
>>>>> Similarly, if the device driver wants to resolve a device page fault
>>>>> or prefetch data, the driver should call gm_dev_fault(). This
>>>>> function examines the mapping status and determines whether the
>>>>> device driver should migrate a CPU page to device or install a zero-filled
>> device page.
>>>>> The logical mapping abstraction enhances the extensibility of Linux
>>>>> core MM (a virtual page may be mapped to a device physical page
>>>>> without any CPU PTE installed). The current implementation is not
>>>>> complete, since it only focused on anonymous VMAs with
>>>>> MAP_PEER_SHARED flag. The future plan of logical page table is to
>>>>> provide a generic abstraction layer that support common anonymous
>>>>> memory (I am looking at you, transparent huge pages)
>>>> and
>>>>> file-backed memory.
>>>>>
>>>>> --------------------
>>>>>
>>>>> Use cases
>>>>>
>>>>> GMEM has been tested over Huawei's NPU (neural process unit) device
>> driver.
>>>>> The original NPU device driver has approximately 30,000 lines of
>>>>> code for memory management. On the contrary, the GMEM-based one has
>>>>> less than 30 lines of code calling GMEM API, with approximately
>>>>> 3,700 lines of code implementing the MMU functions. This effectively
>>>>> saves over 26,200 lines of MM code for one driver. Therefore,
>>>>> developers from accelerator vendors, including Nvidia, AMD, Intel
>>>>> and other companies are welcome to discuss if GMEM could be helpful.
>>>>>
>>>>> Using GMEM-based driver, it is possible to write a C-style
>>>>> accelerator code with malloc(), whose underlying mmap() syscall
>>>>> should include MAP_PEER_SHARED according to current GMEM
>>>>> implementation. Importantly,
>>>> GMEM
>>>>> guarantees a coherent view of memory between the host and all
>>>>> attached devices. This means that any data written by the CPU or any
>>>>> attached accelerator can be seen by the next memory load instruction
>>>>> issued by any attached accelerator or the CPU. Furthermore, the NPU
>>>>> device was able to oversubscribe memory by swapping memory to host
>>>>> DDR. Note that this
>>>> memory
>>>>> oversubscription mechanism can be universal if the physical memory
>>>>> management is provided by GMEM. Other potential use cases of GMEM
>>>>> could include the IOMMU driver, KVM and RDMA drivers, as long as the
>>>>> device needs to manage external memory resources like VMAs, MMUs or
>> local DRAMs.
>>>>> --------------------
>>>>>
>>>>> Discussion
>>>>>
>>>>> Physical memory management
>>>>> Most accelerators require the host OS to manage device DRAM. Even
>>>>> accelerators capable of running an OS inside the driver can benefit
>>>>> from it, since it helps avoid synchronizing management status
>>>>> between the host and device. In Linux OSS EU summit 2023, Hannes
>>>>> Reinecke from SUSE Labs suggested that people are concerned with the
>>>>> memory consumption of struct page (which considers all generic
>>>>> scenarios for the kernel). This leads to a possible solution that,
>>>>> instead of reusing Linux struct page and ZONE_DEVICE mechanism, GMEM
>>>>> can implement an isolated buddy allocator
>>>> for
>>>>> the device to instantiate and register. The isolation is useful
>>>>> because device DRAM physical address space is independent.
>>>>> Furthermore, the isolated buddy allocator can utilize a customized
>>>>> struct page that consumes less memory. It is worth discussing if
>>>>> accelerator vendors desire this solution.
>>>>>
>>>>> MMU functions
>>>>> The MMU functions peer_map() and peer_unmap() overlap other
>>>>> functions, leaving a question if the MMU functions should be
>>>>> decoupled as more basic operations. Decoupling them could
>>>>> potentially prevent device drivers coalescing these basic steps
>>>>> within a single host-device communication operation, while coupling
>>>>> them makes it more difficult for device drivers to utilize GMEM interface.
>>>>>
>>>>> The idea of GMEM was originated from Weixi's PhD study with Prof.
>>>>> Scott Rixner and Prof. Alan L. Cox at Rice University.
>>>>>
>>>>> [1]https://arxiv.org/abs/2310.12554.
>>>>>
>>>>> Weixi Zhu (6):
>>>>> mm/gmem: add heterogeneous NUMA node
>>>>> mm/gmem: add arch-independent abstraction to track address mapping
>>>>> status
>>>>> mm/gmem: add GMEM (Generalized Memory Management) interface for
>>>>> external accelerators
>>>>> mm/gmem: add new syscall hmadvise() to issue memory hints for
>>>>> heterogeneous NUMA nodes
>>>>> mm/gmem: resolve VMA conflicts for attached peer devices
>>>>> mm/gmem: extending Linux core MM to support unified virtual address
>>>>> space
>>>>>
>>>>> arch/arm64/include/asm/unistd.h | 2 +-
>>>>> arch/arm64/include/asm/unistd32.h | 2 +
>>>>> drivers/base/node.c | 6 +
>>>>> fs/proc/task_mmu.c | 3 +
>>>>> include/linux/gmem.h | 368 ++++++++++++
>>>>> include/linux/mm.h | 8 +
>>>>> include/linux/mm_types.h | 5 +
>>>>> include/linux/nodemask.h | 10 +
>>>>> include/uapi/asm-generic/mman-common.h | 4 +
>>>>> include/uapi/asm-generic/unistd.h | 5 +-
>>>>> init/main.c | 2 +
>>>>> kernel/fork.c | 5 +
>>>>> kernel/sys_ni.c | 2 +
>>>>> mm/Kconfig | 14 +
>>>>> mm/Makefile | 1 +
>>>>> mm/gmem.c | 746 ++++++++++++++++++++++++
>>>>> mm/huge_memory.c | 85 ++-
>>>>> mm/memory.c | 42 +-
>>>>> mm/mempolicy.c | 4 +
>>>>> mm/mmap.c | 40 +-
>>>>> mm/oom_kill.c | 2 +
>>>>> mm/page_alloc.c | 3 +
>>>>> mm/vm_object.c | 309 ++++++++++
>>>>> tools/include/uapi/asm-generic/unistd.h | 5 +-
>>>>> 24 files changed, 1654 insertions(+), 19 deletions(-)
>>>>> create mode 100644 include/linux/gmem.h
>>>>> create mode 100644 mm/gmem.c
>>>>> create mode 100644 mm/vm_object.c
>>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20231201/6ccb7fcf/attachment-0001.htm>
More information about the dri-devel
mailing list