[PATCH v2 01/10] dt-bindings: display: bridge: tc358775: make stby gpio and vdd supplies optional

[Krzysztof Kozlowski]

On 02/12/2023 08:54, Tony Lindgren wrote:
> From: Michael Walle <mwalle at kernel.org>
> 
> For a normal operation, the vdd supplies nor the stby GPIO is needed.
> There are boards, where these voltages are statically enabled during
> board power-up.

This means supply is still required.

> 
> The reset pin is required because once the PPI (PHY protocol interface)
> is started, it can only be stopped by asserting the reset pin.
> 
> Signed-off-by: Michael Walle <mwalle at kernel.org>
> Signed-off-by: Tony Lindgren <tony at atomide.com>
> ---


Best regards,
Krzysztof