[PATCH v5 00/44] drm/connector: Create HDMI Connector infrastructure
Maxime Ripard
mripard at kernel.org
Thu Dec 7 15:49:23 UTC 2023
Hi,
Here's a series that creates some extra infrastructure specifically
targeted at HDMI controllers.
The idea behind this series came from a recent discussion on IRC during
which we discussed infoframes generation of i915 vs everything else.
Infoframes generation code still requires some decent boilerplate, with
each driver doing some variation of it.
In parallel, while working on vc4, we ended up converting a lot of i915
logic (mostly around format / bpc selection, and scrambler setup) to
apply on top of a driver that relies only on helpers.
While currently sitting in the vc4 driver, none of that logic actually
relies on any driver or hardware-specific behaviour.
The only missing piece to make it shareable are a bunch of extra
variables stored in a state (current bpc, format, RGB range selection,
etc.).
The initial implementation was relying on some generic subclass of
drm_connector to address HDMI connectors, with a bunch of helpers that
will take care of all the "HDMI Spec" related code. Scrambler setup is
missing at the moment but can easily be plugged in.
The feedback was that creating a connector subclass like was done for
writeback would prevent the adoption of those helpers since it couldn't
be used in all situations (like when the connector driver can implement
multiple output) and required more churn to cast between the
drm_connector and its subclass. The decision was thus to provide a set
of helper and to store the required variables in drm_connector and
drm_connector_state. This what has been implemented now.
Hans Verkuil also expressed interest in implementing a mechanism in v4l2
to retrieve infoframes from HDMI receiver and implementing a tool to
decode (and eventually check) infoframes. His current work on
edid-decode to enable that based on that series can be found here:
https://git.linuxtv.org/hverkuil/edid-decode.git/log/?h=hverkuil
And some more context here:
https://lore.kernel.org/dri-devel/50db7366-cd3d-4675-aaad-b857202234de@xs4all.nl/
This series thus leverages the infoframe generation code to expose it
through debugfs.
I also used the occasion to unit-test everything but the infoframe
generation, which can come later once I get a proper understanding of
what the infoframe are supposed to look like. This required to add some
extra kunit helpers and infrastructure to have multiple EDIDs and allow
each test to run with a particular set of capabilities.
This entire series has been tested on a Pi4, passes all its unittests
(125 new tests), and has only been build-tested for sunxi and rockchip.
Let me know what you think,
Maxime
Signed-off-by: Maxime Ripard <mripard at kernel.org>
---
Changes in v5:
- Dropped the connector init arg checking patch, and the related kunit
tests
- Dropped HDMI Vendor infoframes in rockchip inno_hdmi
- Fixed the build warnings
- Link to v4: https://lore.kernel.org/r/20231128-kms-hdmi-connector-state-v4-0-c7602158306e@kernel.org
Changes in v4:
- Create unit tests for everything but infoframes
- Fix a number of bugs identified by the unit tests
- Rename DRM (Dynamic Range and Mastering) infoframe file to HDR_DRM
- Drop RFC status
- Link to v3: https://lore.kernel.org/r/20231031-kms-hdmi-connector-state-v3-0-328b0fae43a7@kernel.org
Changes in v3:
- Made sure the series work on the RaspberryPi4
- Handle YUV420 in the char clock rate computation
- Use the maximum bpc value the connector allows at reset
- Expose the RGB Limited vs Full Range value in the connector state
instead of through a helper
- Fix Broadcast RGB documentation
- Add more debug logging
- Small fixes here and there
- Link to v2: https://lore.kernel.org/r/20230920-kms-hdmi-connector-state-v2-0-17932daddd7d@kernel.org
Changes in v2:
- Change from a subclass to a set of helpers for drm_connector and
drm_connector state
- Don't assume that all drivers support RGB, YUV420 and YUV422 but make
them provide a bitfield instead.
- Don't assume that all drivers support the Broadcast RGB property but
make them call the registration helper.
- Document the Broacast RGB property
- Convert the inno_hdmi and sun4i_hdmi driver.
- Link to v1: https://lore.kernel.org/r/20230814-kms-hdmi-connector-state-v1-0-048054df3654@kernel.org
---
Maxime Ripard (44):
drm/tests: helpers: Include missing drm_drv header
drm/tests: helpers: Add atomic helpers
drm/tests: Add helper to create mock plane
drm/tests: Add helper to create mock crtc
drm/tests: connector: Add tests for drmm_connector_init
drm/connector: Introduce an HDMI connector initialization function
drm/connector: hdmi: Create an HDMI sub-state
drm/connector: hdmi: Add Broadcast RGB property
drm/connector: hdmi: Add RGB Quantization Range to the connector state
drm/connector: hdmi: Add output BPC to the connector state
drm/connector: hdmi: Add support for output format
drm/connector: hdmi: Add HDMI compute clock helper
drm/connector: hdmi: Calculate TMDS character rate
drm/connector: hdmi: Add custom hook to filter TMDS character rate
drm/connector: hdmi: Compute bpc and format automatically
drm/connector: hdmi: Add Infoframes generation
drm/connector: hdmi: Create Infoframe DebugFS entries
drm/vc4: hdmi: Create destroy state implementation
drm/vc4: hdmi: Switch to HDMI connector
drm/vc4: tests: Remove vc4_dummy_plane structure
drm/vc4: tests: Convert to plane creation helper
drm/rockchip: inno_hdmi: Remove useless mode_fixup
drm/rockchip: inno_hdmi: Remove useless copy of drm_display_mode
drm/rockchip: inno_hdmi: Switch encoder hooks to atomic
drm/rockchip: inno_hdmi: Get rid of mode_set
drm/rockchip: inno_hdmi: no need to store vic
drm/rockchip: inno_hdmi: Remove unneeded has audio flag
drm/rockchip: inno_hdmi: Remove useless input format
drm/rockchip: inno_hdmi: Remove useless output format
drm/rockchip: inno_hdmi: Remove useless colorimetry
drm/rockchip: inno_hdmi: Remove useless enum
drm/rockchip: inno_hdmi: Remove tmds rate from structure
drm/rockchip: inno_hdmi: Remove useless coeff_csc matrix
drm/rockchip: inno_hdmi: Remove useless mode_valid
drm/rockchip: inno_hdmi: Drop HDMI Vendor Infoframe support
drm/rockchip: inno_hdmi: Move infoframe disable to separate function
drm/rockchip: inno_hdmi: Switch to infoframe type
drm/rockchip: inno_hdmi: Remove unused drm device pointer
drm/rockchip: inno_hdmi: Switch to HDMI connector
drm/sun4i: hdmi: Convert encoder to atomic
drm/sun4i: hdmi: Move mode_set into enable
drm/sun4i: hdmi: Switch to container_of_const
drm/sun4i: hdmi: Consolidate atomic_check and mode_valid
drm/sun4i: hdmi: Switch to HDMI connector
Documentation/gpu/kms-properties.csv | 1 -
drivers/gpu/drm/Kconfig | 1 +
drivers/gpu/drm/drm_atomic.c | 11 +
drivers/gpu/drm/drm_atomic_state_helper.c | 659 ++++++++
drivers/gpu/drm/drm_atomic_uapi.c | 4 +
drivers/gpu/drm/drm_connector.c | 243 +++
drivers/gpu/drm/drm_debugfs.c | 110 ++
drivers/gpu/drm/rockchip/inno_hdmi.c | 346 +---
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 203 ++-
drivers/gpu/drm/tests/Makefile | 1 +
.../gpu/drm/tests/drm_atomic_state_helper_test.c | 1728 ++++++++++++++++++++
drivers/gpu/drm/tests/drm_connector_test.c | 1227 +++++++++++++-
drivers/gpu/drm/tests/drm_kunit_edid.h | 482 ++++++
drivers/gpu/drm/tests/drm_kunit_helpers.c | 150 ++
drivers/gpu/drm/vc4/tests/vc4_mock.c | 6 +-
drivers/gpu/drm/vc4/tests/vc4_mock.h | 9 +-
drivers/gpu/drm/vc4/tests/vc4_mock_plane.c | 44 +-
drivers/gpu/drm/vc4/vc4_hdmi.c | 626 +------
drivers/gpu/drm/vc4/vc4_hdmi.h | 44 +-
drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 6 +-
include/drm/drm_atomic_state_helper.h | 12 +
include/drm/drm_connector.h | 257 +++
include/drm/drm_kunit_helpers.h | 23 +
23 files changed, 5202 insertions(+), 991 deletions(-)
---
base-commit: 90d50b8d85834e73536fdccd5aa913b30494fef0
change-id: 20230814-kms-hdmi-connector-state-616787e67927
Best regards,
--
Maxime Ripard <mripard at kernel.org>
More information about the dri-devel
mailing list