[PATCH v2 1/1] drm/msm/adreno: Add support for SM7150 SoC machine

[Akhil P Oommen]

On Thu, Nov 23, 2023 at 12:03:56AM +0300, Danila Tikhonov wrote:
> 
> sc7180/sm7125 (atoll) expects speedbins from atoll.dtsi:
> And has a parameter: /delete-property/ qcom,gpu-speed-bin;
> 107 for 504Mhz max freq, pwrlevel 4
> 130 for 610Mhz max freq, pwrlevel 3
> 159 for 750Mhz max freq, pwrlevel 5
> 169 for 800Mhz max freq, pwrlevel 2
> 174 for 825Mhz max freq, pwrlevel 1 (Downstream says 172, but thats probably
> typo)
A bit confused. where do you see 172 in downstream code? It is 174 in the downstream
code when I checked.
> For rest of the speed bins, speed-bin value is calulated as
> FMAX/4.8MHz + 2 round up to zero decimal places.
> 
> sm7150 (sdmmagpie) expects speedbins from sdmmagpie-gpu.dtsi:
> 128 for 610Mhz max freq, pwrlevel 3
> 146 for 700Mhz max freq, pwrlevel 2
> 167 for 800Mhz max freq, pwrlevel 4
> 172 for 504Mhz max freq, pwrlevel 1
> For rest of the speed bins, speed-bin value is calulated as
> FMAX/4.8 MHz round up to zero decimal places.
> 
> Creating a new entry does not make much sense.
> I can suggest expanding the standard entry:
> 
> .speedbins = ADRENO_SPEEDBINS(
>     { 0, 0 },
>     /* sc7180/sm7125 */
>     { 107, 3 },
>     { 130, 4 },
>     { 159, 5 },
>     { 168, 1 }, has already
>     { 174, 2 }, has already
>     /* sm7150 */
>     { 128, 1 },
>     { 146, 2 },
>     { 167, 3 },
>     { 172, 4 }, ),
> 

A difference I see between atoll and sdmmagpie is that the former
doesn't support 180Mhz. If you want to do the same, then you need to use
a new bit in the supported-hw bitfield instead of reusing an existing one.
Generally it is better to stick to exactly what downstream does.

-Akhil.

> All the best,
> Danila
> 
> On 11/22/23 23:28, Konrad Dybcio wrote:
> > 
> > 
> > On 10/16/23 16:32, Dmitry Baryshkov wrote:
> > > On 26/09/2023 23:03, Konrad Dybcio wrote:
> > > > On 26.09.2023 21:10, Danila Tikhonov wrote:
> > > > > 
> > > > > I think you mean by name downstream dt - sdmmagpie-gpu.dtsi
> > > > > 
> > > > > You can see the forked version of the mainline here:
> > > > > https://github.com/sm7150-mainline/linux/blob/next/arch/arm64/boot/dts/qcom/sm7150.dtsi
> > > > > 
> > > > > 
> > > > > All fdt that we got here, if it is useful for you:
> > > > > https://github.com/sm7150-mainline/downstream-fdt
> > > > > 
> > > > > Best wishes, Danila
> > > > Taking a look at downstream, atoll.dtsi (SC7180) includes
> > > > sdmmagpie-gpu.dtsi.
> > > > 
> > > > Bottom line is, they share the speed bins, so it should be
> > > > fine to just extend the existing entry.
> > > 
> > > But then atoll.dtsi rewrites speed bins and pwrlevel bins. So they
> > > are not shared.
> > +Akhil
> > 
> > could you please check internally?
> > 
> > Konrad
>