[net-next v1 00/16] Device Memory TCP
Mina Almasry
almasrymina at google.com
Fri Dec 8 00:52:31 UTC 2023
Major changes in v1:
--------------
1. Implemented MVP queue API ndos to remove the userspace-visible
driver reset.
2. Fixed issues in the napi_pp_put_page() devmem frag unref path.
3. Removed RFC tag.
Many smaller addressed comments across all the patches (patches have
individual change log).
Full tree including the rest of the GVE driver changes:
https://github.com/mina/linux/commits/tcpdevmem-v1
Cc: Yunsheng Lin <linyunsheng at huawei.com>
Cc: Shailend Chand <shailend at google.com>
Cc: Harshitha Ramamurthy <hramamurthy at google.com>
Changes in RFC v3:
------------------
1. Pulled in the memory-provider dependency from Jakub's RFC[1] to make the
series reviewable and mergable.
2. Implemented multi-rx-queue binding which was a todo in v2.
3. Fix to cmsg handling.
The sticking point in RFC v2[2] was the device reset required to refill
the device rx-queues after the dmabuf bind/unbind. The solution
suggested as I understand is a subset of the per-queue management ops
Jakub suggested or similar:
https://lore.kernel.org/netdev/20230815171638.4c057dcd@kernel.org/
This is not addressed in this revision, because:
1. This point was discussed at netconf & netdev and there is openness to
using the current approach of requiring a device reset.
2. Implementing individual queue resetting seems to be difficult for my
test bed with GVE. My prototype to test this ran into issues with the
rx-queues not coming back up properly if reset individually. At the
moment I'm unsure if it's a mistake in the POC or a genuine issue in
the virtualization stack behind GVE, which currently doesn't test
individual rx-queue restart.
3. Our usecases are not bothered by requiring a device reset to refill
the buffer queues, and we'd like to support NICs that run into this
limitation with resetting individual queues.
My thought is that drivers that have trouble with per-queue configs can
use the support in this series, while drivers that support new netdev
ops to reset individual queues can automatically reset the queue as
part of the dma-buf bind/unbind.
The same approach with device resets is presented again for consideration
with other sticking points addressed.
This proposal includes the rx devmem path only proposed for merge. For a
snapshot of my entire tree which includes the GVE POC page pool support &
device memory support:
https://github.com/torvalds/linux/compare/master...mina:linux:tcpdevmem-v3
[1] https://lore.kernel.org/netdev/f8270765-a27b-6ccf-33ea-cda097168d79@redhat.com/T/
[2] https://lore.kernel.org/netdev/CAHS8izOVJGJH5WF68OsRWFKJid1_huzzUK+hpKbLcL4pSOD1Jw@mail.gmail.com/T/
Cc: Shakeel Butt <shakeelb at google.com>
Cc: Jeroen de Borst <jeroendb at google.com>
Cc: Praveen Kaligineedi <pkaligineedi at google.com>
Changes in RFC v2:
------------------
The sticking point in RFC v1[1] was the dma-buf pages approach we used to
deliver the device memory to the TCP stack. RFC v2 is a proof-of-concept
that attempts to resolve this by implementing scatterlist support in the
networking stack, such that we can import the dma-buf scatterlist
directly. This is the approach proposed at a high level here[2].
Detailed changes:
1. Replaced dma-buf pages approach with importing scatterlist into the
page pool.
2. Replace the dma-buf pages centric API with a netlink API.
3. Removed the TX path implementation - there is no issue with
implementing the TX path with scatterlist approach, but leaving
out the TX path makes it easier to review.
4. Functionality is tested with this proposal, but I have not conducted
perf testing yet. I'm not sure there are regressions, but I removed
perf claims from the cover letter until they can be re-confirmed.
5. Added Signed-off-by: contributors to the implementation.
6. Fixed some bugs with the RX path since RFC v1.
Any feedback welcome, but specifically the biggest pending questions
needing feedback IMO are:
1. Feedback on the scatterlist-based approach in general.
2. Netlink API (Patch 1 & 2).
3. Approach to handle all the drivers that expect to receive pages from
the page pool (Patch 6).
[1] https://lore.kernel.org/netdev/dfe4bae7-13a0-3c5d-d671-f61b375cb0b4@gmail.com/T/
[2] https://lore.kernel.org/netdev/CAHS8izPm6XRS54LdCDZVd0C75tA1zHSu6jLVO8nzTLXCc=H7Nw@mail.gmail.com/
----------------------
* TL;DR:
Device memory TCP (devmem TCP) is a proposal for transferring data to and/or
from device memory efficiently, without bouncing the data to a host memory
buffer.
* Problem:
A large amount of data transfers have device memory as the source and/or
destination. Accelerators drastically increased the volume of such transfers.
Some examples include:
- ML accelerators transferring large amounts of training data from storage into
GPU/TPU memory. In some cases ML training setup time can be as long as 50% of
TPU compute time, improving data transfer throughput & efficiency can help
improving GPU/TPU utilization.
- Distributed training, where ML accelerators, such as GPUs on different hosts,
exchange data among them.
- Distributed raw block storage applications transfer large amounts of data with
remote SSDs, much of this data does not require host processing.
Today, the majority of the Device-to-Device data transfers the network are
implemented as the following low level operations: Device-to-Host copy,
Host-to-Host network transfer, and Host-to-Device copy.
The implementation is suboptimal, especially for bulk data transfers, and can
put significant strains on system resources, such as host memory bandwidth,
PCIe bandwidth, etc. One important reason behind the current state is the
kernel’s lack of semantics to express device to network transfers.
* Proposal:
In this patch series we attempt to optimize this use case by implementing
socket APIs that enable the user to:
1. send device memory across the network directly, and
2. receive incoming network packets directly into device memory.
Packet _payloads_ go directly from the NIC to device memory for receive and from
device memory to NIC for transmit.
Packet _headers_ go to/from host memory and are processed by the TCP/IP stack
normally. The NIC _must_ support header split to achieve this.
Advantages:
- Alleviate host memory bandwidth pressure, compared to existing
network-transfer + device-copy semantics.
- Alleviate PCIe BW pressure, by limiting data transfer to the lowest level
of the PCIe tree, compared to traditional path which sends data through the
root complex.
* Patch overview:
** Part 1: netlink API
Gives user ability to bind dma-buf to an RX queue.
** Part 2: scatterlist support
Currently the standard for device memory sharing is DMABUF, which doesn't
generate struct pages. On the other hand, networking stack (skbs, drivers, and
page pool) operate on pages. We have 2 options:
1. Generate struct pages for dmabuf device memory, or,
2. Modify the networking stack to process scatterlist.
Approach #1 was attempted in RFC v1. RFC v2 implements approach #2.
** part 3: page pool support
We piggy back on page pool memory providers proposal:
https://github.com/kuba-moo/linux/tree/pp-providers
It allows the page pool to define a memory provider that provides the
page allocation and freeing. It helps abstract most of the device memory
TCP changes from the driver.
** part 4: support for unreadable skb frags
Page pool iovs are not accessible by the host; we implement changes
throughput the networking stack to correctly handle skbs with unreadable
frags.
** Part 5: recvmsg() APIs
We define user APIs for the user to send and receive device memory.
Not included with this RFC is the GVE devmem TCP support, just to
simplify the review. Code available here if desired:
https://github.com/mina/linux/tree/tcpdevmem
This RFC is built on top of net-next with Jakub's pp-providers changes
cherry-picked.
* NIC dependencies:
1. (strict) Devmem TCP require the NIC to support header split, i.e. the
capability to split incoming packets into a header + payload and to put
each into a separate buffer. Devmem TCP works by using device memory
for the packet payload, and host memory for the packet headers.
2. (optional) Devmem TCP works better with flow steering support & RSS support,
i.e. the NIC's ability to steer flows into certain rx queues. This allows the
sysadmin to enable devmem TCP on a subset of the rx queues, and steer
devmem TCP traffic onto these queues and non devmem TCP elsewhere.
The NIC I have access to with these properties is the GVE with DQO support
running in Google Cloud, but any NIC that supports these features would suffice.
I may be able to help reviewers bring up devmem TCP on their NICs.
* Testing:
The series includes a udmabuf kselftest that show a simple use case of
devmem TCP and validates the entire data path end to end without
a dependency on a specific dmabuf provider.
** Test Setup
Kernel: net-next with this RFC and memory provider API cherry-picked
locally.
Hardware: Google Cloud A3 VMs.
NIC: GVE with header split & RSS & flow steering support.
Jakub Kicinski (2):
net: page_pool: factor out releasing DMA from releasing the page
net: page_pool: create hooks for custom page providers
Mina Almasry (14):
queue_api: define queue api
gve: implement queue api
net: netdev netlink api to bind dma-buf to a net device
netdev: support binding dma-buf to netdevice
netdev: netdevice devmem allocator
memory-provider: dmabuf devmem memory provider
page_pool: device memory support
page_pool: don't release iov on elevanted refcount
net: support non paged skb frags
net: add support for skbs with unreadable frags
tcp: RX path for devmem TCP
net: add SO_DEVMEM_DONTNEED setsockopt to release RX frags
net: add devmem TCP documentation
selftests: add ncdevmem, netcat for devmem TCP
Documentation/netlink/specs/netdev.yaml | 52 ++
Documentation/networking/devmem.rst | 270 ++++++++++
drivers/net/ethernet/google/gve/gve_adminq.c | 6 +-
drivers/net/ethernet/google/gve/gve_adminq.h | 3 +
drivers/net/ethernet/google/gve/gve_dqo.h | 2 +
drivers/net/ethernet/google/gve/gve_main.c | 286 +++++++++++
drivers/net/ethernet/google/gve/gve_rx_dqo.c | 5 +-
include/linux/netdevice.h | 24 +
include/linux/skbuff.h | 56 ++-
include/linux/socket.h | 1 +
include/net/devmem.h | 109 +++++
include/net/netdev_rx_queue.h | 1 +
include/net/page_pool/helpers.h | 162 +++++-
include/net/page_pool/types.h | 48 ++
include/net/sock.h | 2 +
include/net/tcp.h | 5 +-
include/uapi/asm-generic/socket.h | 6 +
include/uapi/linux/netdev.h | 19 +
include/uapi/linux/uio.h | 14 +
net/core/datagram.c | 6 +
net/core/dev.c | 314 +++++++++++-
net/core/gro.c | 7 +-
net/core/netdev-genl-gen.c | 19 +
net/core/netdev-genl-gen.h | 2 +
net/core/netdev-genl.c | 124 +++++
net/core/page_pool.c | 239 +++++++--
net/core/skbuff.c | 108 +++-
net/core/sock.c | 38 ++
net/ipv4/tcp.c | 196 +++++++-
net/ipv4/tcp_input.c | 13 +-
net/ipv4/tcp_ipv4.c | 8 +
net/ipv4/tcp_output.c | 5 +-
net/packet/af_packet.c | 4 +-
tools/include/uapi/linux/netdev.h | 19 +
tools/testing/selftests/net/.gitignore | 1 +
tools/testing/selftests/net/Makefile | 5 +
tools/testing/selftests/net/ncdevmem.c | 489 +++++++++++++++++++
37 files changed, 2585 insertions(+), 83 deletions(-)
create mode 100644 Documentation/networking/devmem.rst
create mode 100644 include/net/devmem.h
create mode 100644 tools/testing/selftests/net/ncdevmem.c
--
2.43.0.472.g3155946c3a-goog
More information about the dri-devel
mailing list