[PATCH v2 00/16] Add CDM support for MSM writeback
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Dec 8 12:14:17 UTC 2023
On Fri, 8 Dec 2023 at 07:06, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>
> Chroma Down Sampling (CDM) block is a hardware block in the DPU pipeline
> which among other things has a CSC block that can convert RGB input
> from the DPU to YUV data.
This block is more or less standard between all hw versions. I do not
expect any faults and/or issues with any of the platforms.
>From what I can see, from the platforms that we do not support, it is
not available only on sm6115/qcs4290, qcm2290 and sm6375. Can we
please enable it for all the other platforms?
>
> This block can be used with either HDMI, DP or writeback interface.
>
> In this series, lets first add the support for CDM block to be used
> with writeback and then follow-up with support for other interfaces such
> as DP.
>
> This was validated by adding support to pass custom output format to the
> IGT's kms_writeback test-case, specifically only for the output dump
> test-case [1].
>
> The usage for this is:
>
> ./kms_writeback -d -f <name of the DRM YUV fmt from igt_fb>
>
> So for NV12, this can be verified with the below command:
>
> ./kms_writeback -d -f NV12
>
> [1] : https://patchwork.freedesktop.org/series/122125/
>
> changes in v2:
> - rebased on top of current msm-next-lumag
> - fix commit text of some of the patches
> - move csc matrices to dpu_hw_util as they span across DPU
> - move cdm blk define to dpu_hw_catalog as its common across chipsets
> - remove bit magic in dpu_hw_cdm with relevant defines
> - use drmm_kzalloc instead of kzalloc/free
> - protect bind_pingpong_blk with core_rev check
> - drop setup_csc_data() and setup_cdwn() ops as they
> are merged into enable()
> - protect bind_pingpong_blk with core_rev check
> - drop setup_csc_data() and setup_cdwn() ops as they
> are merged into enable()
> - move needs_cdm to topology struct
> - call update_pending_flush_cdm even when bind_pingpong_blk
> is not present
> - drop usage of setup_csc_data() and setup_cdwn() cdm ops
> as they both have been merged into enable()
> - drop reduntant hw_cdm and hw_pp checks
> - drop fb related checks from dpu_encoder::atomic_mode_set()
> - introduce separate wb2_format arrays for rgb and yuv
>
> Abhinav Kumar (16):
> drm/msm/dpu: add formats check for writeback encoder
> drm/msm/dpu: rename dpu_encoder_phys_wb_setup_cdp to match its
> functionality
> drm/msm/dpu: fix writeback programming for YUV cases
> drm/msm/dpu: move csc matrices to dpu_hw_util
> drm/msm/dpu: add cdm blocks to sc7280 dpu_hw_catalog
> drm/msm/dpu: add cdm blocks to sm8250 dpu_hw_catalog
> drm/msm/dpu: add dpu_hw_cdm abstraction for CDM block
> drm/msm/dpu: add cdm blocks to RM
> drm/msm/dpu: add support to allocate CDM from RM
> drm/msm/dpu: add CDM related logic to dpu_hw_ctl layer
> drm/msm/dpu: add support to disable CDM block during encoder cleanup
> drm/msm/dpu: add an API to setup the CDM block for writeback
> drm/msm/dpu: plug-in the cdm related bits to writeback setup
> drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output
> drm/msm/dpu: introduce separate wb2_format arrays for rgb and yuv
> drm/msm/dpu: add cdm blocks to dpu snapshot
>
> drivers/gpu/drm/msm/Makefile | 1 +
> .../msm/disp/dpu1/catalog/dpu_10_0_sm8650.h | 4 +-
> .../msm/disp/dpu1/catalog/dpu_6_0_sm8250.h | 5 +-
> .../msm/disp/dpu1/catalog/dpu_6_2_sc7180.h | 4 +-
> .../msm/disp/dpu1/catalog/dpu_7_2_sc7280.h | 5 +-
> .../msm/disp/dpu1/catalog/dpu_9_0_sm8550.h | 4 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 37 +++
> .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 5 +
> .../drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 117 +++++++-
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 47 ++-
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 13 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c | 276 ++++++++++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h | 114 ++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 35 +++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 12 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 7 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c | 71 +++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h | 8 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c | 3 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 4 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h | 1 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 39 +--
> drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 51 +++-
> drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h | 2 +
> drivers/gpu/drm/msm/msm_drv.h | 2 +
> 25 files changed, 815 insertions(+), 52 deletions(-)
> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c
> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h
>
> --
> 2.40.1
>
--
With best wishes
Dmitry
More information about the dri-devel
mailing list