[PATCH v2 07/16] drm/msm/dpu: add dpu_hw_cdm abstraction for CDM block
Abhinav Kumar
quic_abhinavk at quicinc.com
Fri Dec 8 17:08:56 UTC 2023
On 12/8/2023 4:06 AM, Dmitry Baryshkov wrote:
> On Fri, 8 Dec 2023 at 07:07, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>>
>> CDM block comes with its own set of registers and operations
>> which can be done. In-line with other hardware sub-blocks, this
>
> I always thought that sub-blocks refer to the dpu_foo_sub_blks data,
> which CDM doesn't have.
>
All of these are DPU-sub blks in some sense. If this is confusing to
you, I will just say "in-line with other DPU hardware blocks".
>
>> change adds the dpu_hw_cdm abstraction for the CDM block.
>>
>> changes in v2:
>> - replace bit magic with relevant defines
>> - use drmm_kzalloc instead of kzalloc/free
>> - some formatting fixes
>> - inline _setup_cdm_ops()
>> - protect bind_pingpong_blk with core_rev check
>> - drop setup_csc_data() and setup_cdwn() ops as they
>> are merged into enable()
>>
>> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
>> ---
>> drivers/gpu/drm/msm/Makefile | 1 +
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c | 276 ++++++++++++++++++++
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h | 114 ++++++++
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 1 +
>> 4 files changed, 392 insertions(+)
>> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c
>> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h
>>
>> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
>> index 49671364fdcf..b1173128b5b9 100644
>> --- a/drivers/gpu/drm/msm/Makefile
>> +++ b/drivers/gpu/drm/msm/Makefile
>> @@ -63,6 +63,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \
>> disp/dpu1/dpu_encoder_phys_wb.o \
>> disp/dpu1/dpu_formats.o \
>> disp/dpu1/dpu_hw_catalog.o \
>> + disp/dpu1/dpu_hw_cdm.o \
>> disp/dpu1/dpu_hw_ctl.o \
>> disp/dpu1/dpu_hw_dsc.o \
>> disp/dpu1/dpu_hw_dsc_1_2.o \
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c
>> new file mode 100644
>> index 000000000000..0dbe2df56cc8
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c
>> @@ -0,0 +1,276 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2023, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#include <drm/drm_managed.h>
>> +
>> +#include "dpu_hw_mdss.h"
>> +#include "dpu_hw_util.h"
>> +#include "dpu_hw_catalog.h"
>> +#include "dpu_hw_cdm.h"
>> +#include "dpu_kms.h"
>> +
>> +#define CDM_CSC_10_OPMODE 0x000
>> +#define CDM_CSC_10_BASE 0x004
>> +
>> +#define CDM_CDWN2_OP_MODE 0x100
>> +#define CDM_CDWN2_CLAMP_OUT 0x104
>> +#define CDM_CDWN2_PARAMS_3D_0 0x108
>> +#define CDM_CDWN2_PARAMS_3D_1 0x10C
>> +#define CDM_CDWN2_COEFF_COSITE_H_0 0x110
>> +#define CDM_CDWN2_COEFF_COSITE_H_1 0x114
>> +#define CDM_CDWN2_COEFF_COSITE_H_2 0x118
>> +#define CDM_CDWN2_COEFF_OFFSITE_H_0 0x11C
>> +#define CDM_CDWN2_COEFF_OFFSITE_H_1 0x120
>> +#define CDM_CDWN2_COEFF_OFFSITE_H_2 0x124
>> +#define CDM_CDWN2_COEFF_COSITE_V 0x128
>> +#define CDM_CDWN2_COEFF_OFFSITE_V 0x12C
>> +#define CDM_CDWN2_OUT_SIZE 0x130
>> +
>> +#define CDM_HDMI_PACK_OP_MODE 0x200
>> +#define CDM_CSC_10_MATRIX_COEFF_0 0x004
>> +
>> +#define CDM_MUX 0x224
>> +
>> +/* CDM CDWN2 sub-block bit definitions */
>> +#define CDM_CDWN2_OP_MODE_EN BIT(0)
>> +#define CDM_CDWN2_OP_MODE_ENABLE_H BIT(1)
>> +#define CDM_CDWN2_OP_MODE_ENABLE_V BIT(2)
>> +#define CDM_CDWN2_OP_MODE_METHOD_H_AVG BIT(3)
>> +#define CDM_CDWN2_OP_MODE_METHOD_H_COSITE BIT(4)
>> +#define CDM_CDWN2_OP_MODE_METHOD_V_AVG BIT(5)
>> +#define CDM_CDWN2_OP_MODE_METHOD_V_COSITE BIT(6)
>> +#define CDM_CDWN2_OP_MODE_BITS_OUT_8BIT BIT(7)
>> +#define CDM_CDWN2_OP_MODE_METHOD_H_OFFSITE GENMASK(4, 3)
>> +#define CDM_CDWN2_OP_MODE_METHOD_V_OFFSITE GENMASK(6, 5)
>> +#define CDM_CDWN2_V_PIXEL_DROP_MASK GENMASK(6, 5)
>> +#define CDM_CDWN2_H_PIXEL_DROP_MASK GENMASK(4, 3)
>> +
>> +/* CDM CSC10 sub-block bit definitions */
>> +#define CDM_CSC10_OP_MODE_EN BIT(0)
>> +#define CDM_CSC10_OP_MODE_SRC_FMT_YUV BIT(1)
>> +#define CDM_CSC10_OP_MODE_DST_FMT_YUV BIT(2)
>> +
>> +/* CDM HDMI pack sub-block bit definitions */
>> +#define CDM_HDMI_PACK_OP_MODE_EN BIT(0)
>> +
>> +/**
>> + * Horizontal coefficients for cosite chroma downscale
>> + * s13 representation of coefficients
>> + */
>> +static u32 cosite_h_coeff[] = {0x00000016, 0x000001cc, 0x0100009e};
>> +
>> +/**
>> + * Horizontal coefficients for offsite chroma downscale
>> + */
>> +static u32 offsite_h_coeff[] = {0x000b0005, 0x01db01eb, 0x00e40046};
>> +
>> +/**
>> + * Vertical coefficients for cosite chroma downscale
>> + */
>> +static u32 cosite_v_coeff[] = {0x00080004};
>> +/**
>> + * Vertical coefficients for offsite chroma downscale
>> + */
>> +static u32 offsite_v_coeff[] = {0x00060002};
>> +
>> +static int dpu_hw_cdm_setup_cdwn(struct dpu_hw_cdm *ctx, struct dpu_hw_cdm_cfg *cfg)
>> +{
>> + struct dpu_hw_blk_reg_map *c = &ctx->hw;
>> + u32 opmode = 0;
>> + u32 out_size = 0;
>> +
>> + if (cfg->output_bit_depth == CDM_CDWN_OUTPUT_10BIT)
>> + opmode &= ~CDM_CDWN2_OP_MODE_BITS_OUT_8BIT;
>
> We start from opmode = 0. Does it really make sense to mask bits from
> the zero opmode?
>
Ack, We can drop the ~ and just keep the | below.
>> + else
>> + opmode |= CDM_CDWN2_OP_MODE_BITS_OUT_8BIT;
>> +
>> + /* ENABLE DWNS_H bit */
>> + opmode |= CDM_CDWN2_OP_MODE_ENABLE_H;
>> +
>> + switch (cfg->h_cdwn_type) {
>> + case CDM_CDWN_DISABLE:
>> + /* CLEAR METHOD_H field */
>> + opmode &= ~CDM_CDWN2_H_PIXEL_DROP_MASK;
>> + /* CLEAR DWNS_H bit */
>> + opmode &= ~CDM_CDWN2_OP_MODE_ENABLE_H;
>> + break;
>> + case CDM_CDWN_PIXEL_DROP:
>> + /* Clear METHOD_H field (pixel drop is 0) */
>> + opmode &= ~CDM_CDWN2_H_PIXEL_DROP_MASK;
>> + break;
>> + case CDM_CDWN_AVG:
>> + /* Clear METHOD_H field (Average is 0x1) */
>> + opmode &= ~CDM_CDWN2_H_PIXEL_DROP_MASK;
>> + opmode |= CDM_CDWN2_OP_MODE_METHOD_H_AVG;
>> + break;
>> + case CDM_CDWN_COSITE:
>> + /* Clear METHOD_H field (Average is 0x2) */
>> + opmode &= ~CDM_CDWN2_H_PIXEL_DROP_MASK;
>> + opmode |= CDM_CDWN2_OP_MODE_METHOD_H_COSITE;
>> + /* Co-site horizontal coefficients */
>> + DPU_REG_WRITE(c, CDM_CDWN2_COEFF_COSITE_H_0,
>> + cosite_h_coeff[0]);
>> + DPU_REG_WRITE(c, CDM_CDWN2_COEFF_COSITE_H_1,
>> + cosite_h_coeff[1]);
>> + DPU_REG_WRITE(c, CDM_CDWN2_COEFF_COSITE_H_2,
>> + cosite_h_coeff[2]);
>> + break;
>> + case CDM_CDWN_OFFSITE:
>> + /* Clear METHOD_H field (Average is 0x3) */
>> + opmode &= ~CDM_CDWN2_H_PIXEL_DROP_MASK;
>> + opmode |= CDM_CDWN2_OP_MODE_METHOD_H_OFFSITE;
>> +
>> + /* Off-site horizontal coefficients */
>> + DPU_REG_WRITE(c, CDM_CDWN2_COEFF_OFFSITE_H_0,
>> + offsite_h_coeff[0]);
>> + DPU_REG_WRITE(c, CDM_CDWN2_COEFF_OFFSITE_H_1,
>> + offsite_h_coeff[1]);
>> + DPU_REG_WRITE(c, CDM_CDWN2_COEFF_OFFSITE_H_2,
>> + offsite_h_coeff[2]);
>> + break;
>> + default:
>> + pr_err("%s invalid horz down sampling type\n", __func__);
>
> DPU_ERROR or drm_err
>
Ack.
>> + return -EINVAL;
>> + }
>> +
>> + /* ENABLE DWNS_V bit */
>> + opmode |= CDM_CDWN2_OP_MODE_ENABLE_V;
>> +
>> + switch (cfg->v_cdwn_type) {
>> + case CDM_CDWN_DISABLE:
>> + /* CLEAR METHOD_V field */
>> + opmode &= ~CDM_CDWN2_V_PIXEL_DROP_MASK;
>> + /* CLEAR DWNS_V bit */
>> + opmode &= ~CDM_CDWN2_OP_MODE_ENABLE_V;
>> + break;
>> + case CDM_CDWN_PIXEL_DROP:
>> + /* Clear METHOD_V field (pixel drop is 0) */
>> + opmode &= ~CDM_CDWN2_V_PIXEL_DROP_MASK;
>> + break;
>> + case CDM_CDWN_AVG:
>> + /* Clear METHOD_V field (Average is 0x1) */
>> + opmode &= ~CDM_CDWN2_V_PIXEL_DROP_MASK;
>> + opmode |= CDM_CDWN2_OP_MODE_METHOD_V_AVG;
>> + break;
>> + case CDM_CDWN_COSITE:
>> + /* Clear METHOD_V field (Average is 0x2) */
>> + opmode &= ~CDM_CDWN2_V_PIXEL_DROP_MASK;
>> + opmode |= CDM_CDWN2_OP_MODE_METHOD_V_COSITE;
>> + /* Co-site vertical coefficients */
>> + DPU_REG_WRITE(c,
>> + CDM_CDWN2_COEFF_COSITE_V,
>> + cosite_v_coeff[0]);
>> + break;
>> + case CDM_CDWN_OFFSITE:
>> + /* Clear METHOD_V field (Average is 0x3) */
>> + opmode &= ~CDM_CDWN2_V_PIXEL_DROP_MASK;
>> + opmode |= CDM_CDWN2_OP_MODE_METHOD_V_OFFSITE;
>> +
>> + /* Off-site vertical coefficients */
>> + DPU_REG_WRITE(c,
>> + CDM_CDWN2_COEFF_OFFSITE_V,
>> + offsite_v_coeff[0]);
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + if (cfg->v_cdwn_type || cfg->h_cdwn_type)
>> + opmode |= CDM_CDWN2_OP_MODE_EN; /* EN CDWN module */
>> + else
>> + opmode &= ~CDM_CDWN2_OP_MODE_EN;
>> +
>> + out_size = (cfg->output_width & 0xFFFF) | ((cfg->output_height & 0xFFFF) << 16);
>> + DPU_REG_WRITE(c, CDM_CDWN2_OUT_SIZE, out_size);
>> + DPU_REG_WRITE(c, CDM_CDWN2_OP_MODE, opmode);
>> + DPU_REG_WRITE(c, CDM_CDWN2_CLAMP_OUT, ((0x3FF << 16) | 0x0));
>> +
>> + return 0;
>> +}
>> +
>> +int dpu_hw_cdm_enable(struct dpu_hw_cdm *ctx, struct dpu_hw_cdm_cfg *cdm)
>> +{
>> + struct dpu_hw_blk_reg_map *c = &ctx->hw;
>> + const struct dpu_format *fmt;
>> + u32 opmode = 0;
>> + u32 csc = 0;
>> +
>> + if (!ctx || !cdm)
>> + return -EINVAL;
>> +
>> + fmt = cdm->output_fmt;
>> +
>> + if (!DPU_FORMAT_IS_YUV(fmt))
>> + return -EINVAL;
>> +
>> + dpu_hw_csc_setup(&ctx->hw, CDM_CSC_10_MATRIX_COEFF_0, cdm->csc_cfg, true);
>> + dpu_hw_cdm_setup_cdwn(ctx, cdm);
>> +
>> + if (cdm->output_type == CDM_CDWN_OUTPUT_HDMI) {
>> + if (fmt->chroma_sample != DPU_CHROMA_H1V2)
>> + return -EINVAL; /*unsupported format */
>> + opmode = CDM_HDMI_PACK_OP_MODE_EN;
>> + opmode |= (fmt->chroma_sample << 1);
>> + }
>> +
>> + csc |= CDM_CSC10_OP_MODE_DST_FMT_YUV;
>> + csc &= ~CDM_CSC10_OP_MODE_SRC_FMT_YUV;
>> + csc |= CDM_CSC10_OP_MODE_EN;
>> +
>> + if (ctx && ctx->ops.bind_pingpong_blk)
>> + ctx->ops.bind_pingpong_blk(ctx, true, cdm->pp_id);
>> +
>> + DPU_REG_WRITE(c, CDM_CSC_10_OPMODE, csc);
>> + DPU_REG_WRITE(c, CDM_HDMI_PACK_OP_MODE, opmode);
>> + return 0;
>> +}
>> +
>> +void dpu_hw_cdm_disable(struct dpu_hw_cdm *ctx)
>> +{
>> + if (!ctx)
>> + return;
>> +
>> + if (ctx && ctx->ops.bind_pingpong_blk)
>> + ctx->ops.bind_pingpong_blk(ctx, false, PINGPONG_NONE);
>
> So the bind/un_pingpong_block gets hidden here. Why do we need to
> unbind it manually in the dpu_encoder then?
>
hmm .... I think we can drop the disable op and just call
bind_pingpong_blk directly.
>> +}
>> +
>> +static void dpu_hw_cdm_bind_pingpong_blk(struct dpu_hw_cdm *ctx, bool enable,
>> + const enum dpu_pingpong pp)
>
> I think we settled on the PINGPONG_NONE for removing the binding
>
Ah okay. i probably missed this. so just drop "enable" and use pp val.
>> +{
>> + struct dpu_hw_blk_reg_map *c;
>> + int mux_cfg = 0xF;
>> +
>> + c = &ctx->hw;
>> +
>> + if (enable)
>> + mux_cfg = (pp - PINGPONG_0) & 0x7;
>> +
>> + DPU_REG_WRITE(c, CDM_MUX, mux_cfg);
>> +}
>> +
>> +struct dpu_hw_cdm *dpu_hw_cdm_init(struct drm_device *dev,
>> + const struct dpu_cdm_cfg *cfg, void __iomem *addr,
>> + const struct dpu_mdss_version *mdss_rev)
>> +{
>> + struct dpu_hw_cdm *c;
>> +
>> + c = drmm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
>> + if (!c)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + c->hw.blk_addr = addr + cfg->base;
>> + c->hw.log_mask = DPU_DBG_MASK_CDM;
>> +
>> + /* Assign ops */
>> + c->idx = cfg->id;
>> + c->caps = cfg;
>> +
>> + c->ops.enable = dpu_hw_cdm_enable;
>> + c->ops.disable = dpu_hw_cdm_disable;
>> + if (mdss_rev->core_major_ver >= 5)
>> + c->ops.bind_pingpong_blk = dpu_hw_cdm_bind_pingpong_blk;
>> +
>> + return c;
>> +}
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h
>> new file mode 100644
>> index 000000000000..1ca806f9d18d
>> --- /dev/null
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h
>> @@ -0,0 +1,114 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2023, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#ifndef _DPU_HW_CDM_H
>> +#define _DPU_HW_CDM_H
>> +
>> +#include "dpu_hw_mdss.h"
>> +#include "dpu_hw_top.h"
>> +
>> +struct dpu_hw_cdm;
>> +
>> +struct dpu_hw_cdm_cfg {
>> + u32 output_width;
>> + u32 output_height;
>> + u32 output_bit_depth;
>> + u32 h_cdwn_type;
>> + u32 v_cdwn_type;
>> + const struct dpu_format *output_fmt;
>> + const struct dpu_csc_cfg *csc_cfg;
>> + u32 output_type;
>> + int pp_id;
>> +};
>> +
>> +enum dpu_hw_cdwn_type {
>> + CDM_CDWN_DISABLE,
>> + CDM_CDWN_PIXEL_DROP,
>> + CDM_CDWN_AVG,
>> + CDM_CDWN_COSITE,
>> + CDM_CDWN_OFFSITE,
>> +};
>> +
>> +enum dpu_hw_cdwn_output_type {
>> + CDM_CDWN_OUTPUT_HDMI,
>> + CDM_CDWN_OUTPUT_WB,
>> +};
>> +
>> +enum dpu_hw_cdwn_output_bit_depth {
>> + CDM_CDWN_OUTPUT_8BIT,
>> + CDM_CDWN_OUTPUT_10BIT,
>> +};
>
> Can we please get some documentation for these enums?
>
Ack.
>> +
>> +/**
>> + * struct dpu_hw_cdm_ops : Interface to the chroma down Hw driver functions
>> + * Assumption is these functions will be called after
>> + * clocks are enabled
>> + * @enable: Enables the output to interface and programs the
>> + * output packer
>> + * @disable: Puts the cdm in bypass mode
>> + * @bind_pingpong_blk: enable/disable the connection with pingpong which
>> + * will feed pixels to this cdm
>> + */
>> +struct dpu_hw_cdm_ops {
>> + /**
>> + * Enable the CDM module
>> + * @cdm Pointer to chroma down context
>> + */
>> + int (*enable)(struct dpu_hw_cdm *cdm, struct dpu_hw_cdm_cfg *cfg);
>> +
>> + /**
>> + * Disable the CDM module
>> + * @cdm Pointer to chroma down context
>> + */
>> + void (*disable)(struct dpu_hw_cdm *cdm);
>> +
>> + /**
>> + * Enable/disable the connection with pingpong
>> + * @cdm Pointer to chroma down context
>> + * @enable Enable/disable control
>> + * @pp pingpong block id.
>> + */
>> + void (*bind_pingpong_blk)(struct dpu_hw_cdm *cdm, bool enable,
>> + const enum dpu_pingpong pp);
>> +};
>> +
>> +/**
>> + * struct dpu_hw_cdm - cdm description
>> + * @base: Hardware block base structure
>> + * @hw: Block hardware details
>> + * @idx: CDM index
>> + * @caps: Pointer to cdm_cfg
>> + * @ops: handle to operations possible for this CDM
>> + */
>> +struct dpu_hw_cdm {
>> + struct dpu_hw_blk base;
>> + struct dpu_hw_blk_reg_map hw;
>> +
>> + /* chroma down */
>> + const struct dpu_cdm_cfg *caps;
>> + enum dpu_cdm idx;
>> +
>> + /* ops */
>> + struct dpu_hw_cdm_ops ops;
>> +};
>> +
>> +/**
>> + * dpu_hw_cdm_init - initializes the cdm hw driver object.
>> + * should be called once before accessing every cdm.
>> + * @dev: DRM device handle
>> + * @cdm: CDM catalog entry for which driver object is required
>> + * @addr : mapped register io address of MDSS
>> + * @mdss_rev: mdss hw core revision
>> + */
>> +struct dpu_hw_cdm *dpu_hw_cdm_init(struct drm_device *dev,
>> + const struct dpu_cdm_cfg *cdm, void __iomem *addr,
>> + const struct dpu_mdss_version *mdss_rev);
>> +
>> +static inline struct dpu_hw_cdm *to_dpu_hw_cdm(struct dpu_hw_blk *hw)
>> +{
>> + return container_of(hw, struct dpu_hw_cdm, base);
>> +}
>> +
>> +#endif /*_DPU_HW_CDM_H */
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
>> index f319c8232ea5..9db4cf61bd29 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
>> @@ -466,6 +466,7 @@ struct dpu_mdss_color {
>> #define DPU_DBG_MASK_ROT (1 << 9)
>> #define DPU_DBG_MASK_DSPP (1 << 10)
>> #define DPU_DBG_MASK_DSC (1 << 11)
>> +#define DPU_DBG_MASK_CDM (1 << 12)
>>
>> /**
>> * struct dpu_hw_tear_check - Struct contains parameters to configure
>> --
>> 2.40.1
>>
>
>
> --
> With best wishes
>
> Dmitry
More information about the dri-devel
mailing list