[PATCH v2 2/2] drm/rockchip: rk3066_hdmi: drop custom fill_modes hook

Johan Jonker jbx6244 at gmail.com
Tue Dec 19 15:40:12 UTC 2023



On 12/19/23 13:55, Maxime Ripard wrote:
> Hi,
> 
> On Mon, Dec 18, 2023 at 04:49:06PM +0100, Johan Jonker wrote:
>> CRTC size validation for the display controller has been added with
>> Commit 8e140cb60270 ("drm/rockchip: vop: limit maximum resolution to
>> hardware capabilities"), so we can drop the custom fill_modes hook.
>>
>> Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
> 

> I'm not sure those two are equivalent. CRTC and connectors usually have
> different requirements and capabilities, and thus different,
> supplementary, mode_valid/atomic_check implementations.

Rockchip RK3066 CRTC and connector resolution max_output are equivalent.

>From Rockchip PX2 TRM V1.0.pdf page 17:
- Video Encoder
  Maximum frame rate is up to 30fps at 1920x1080

- Display Interface
  Support LCD or TFT interfaces up to 1920x1080

- HDMI TX Interface
   HDMI version 1.4a, HDCP revision 1.4 and DVI version 1.0 compliant transmitter
   Supports DTV from 480i to 1080i/p HD resolution, and PC from VGA to UXGA by LCDC0 or LCDC1 in RK PX2


Compared to the drm_helper_probe_single_connector_modes() this function added an extra max_output

Checked in rockchip_drm_vop.c is:
https://lore.kernel.org/linux-rockchip/20230216102447.582905-2-s.hauer@pengutronix.de/

+	if (vop->data->max_output.width && mode->hdisplay > vop->data->max_output.width)
+		return MODE_BAD_HVALUE;
+
+	if (vop->data->max_output.height && mode->vdisplay > vop->data->max_output.height)
+		return MODE_BAD_VVALUE;

For RK3066 VOP max_output:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/rockchip/rockchip_vop_reg.c#n506

This patch was made with HDMI in mind.

	.max_output = { 1920, 1080 },

This first part was added by Heiko, but not was not part my patch that I submitted:
-	if (maxX > 1920)
-		maxX = 1920;
-	if (maxY > 1080)
-		maxY = 1080;
-
-	return drm_helper_probe_single_connector_modes(connector, maxX, maxY);
-}

Original patch:
https://patchwork.freedesktop.org/patch/msgid/20190330095639.14626-2-jbx6244@gmail.com

+static int
+rk3066_hdmi_probe_single_connector_modes(struct drm_connector *connector,
+					 uint32_t maxX, uint32_t maxY)
+{
+	return drm_helper_probe_single_connector_modes(connector, 1920, 1080);
+}

Rockchip RK3066 CRTC and connector resolution max_output are equivalent.

Johan

> 
> Maxime


More information about the dri-devel mailing list