[PATCH v3 03/14] drm/panthor: Add the device logical block
Boris Brezillon
boris.brezillon at collabora.com
Fri Dec 22 14:04:56 UTC 2023
On Fri, 22 Dec 2023 13:26:22 +0000
Liviu Dudau <Liviu.Dudau at arm.com> wrote:
> Hi Boris,
>
> On Mon, Dec 04, 2023 at 06:32:56PM +0100, Boris Brezillon wrote:
> > The panthor driver is designed in a modular way, where each logical
> > block is dealing with a specific HW-block or software feature. In order
> > for those blocks to communicate with each other, we need a central
> > panthor_device collecting all the blocks, and exposing some common
> > features, like interrupt handling, power management, reset, ...
> >
> > This what this panthor_device logical block is about.
> >
> > v3:
> > - Add acks for the MIT+GPL2 relicensing
> > - Fix 32-bit support
> > - Shorten the sections protected by panthor_device::pm::mmio_lock to fix
> > lock ordering issues.
> > - Rename panthor_device::pm::lock into panthor_device::pm::mmio_lock to
> > better reflect what this lock is protecting
> > - Use dev_err_probe()
> > - Make sure we call drm_dev_exit() when something fails half-way in
> > panthor_device_reset_work()
> > - Replace CSF_GPU_LATEST_FLUSH_ID_DEFAULT with a constant '1' and a
> > comment to explain. Also remove setting the dummy flush ID on suspend.
> > - Remove drm_WARN_ON() in panthor_exception_name()
> > - Check pirq->suspended in panthor_xxx_irq_raw_handler()
> >
> > Signed-off-by: Boris Brezillon <boris.brezillon at collabora.com>
> > Signed-off-by: Steven Price <steven.price at arm.com>
> > Acked-by: Steven Price <steven.price at arm.com> # MIT+GPL2 relicensing,Arm
> > Acked-by: Grant Likely <grant.likely at linaro.org> # MIT+GPL2 relicensing,Linaro
> > Acked-by: Boris Brezillon <boris.brezillon at collabora.com> # MIT+GPL2 relicensing,Collabora
> > ---
> > drivers/gpu/drm/panthor/panthor_device.c | 497 +++++++++++++++++++++++
> > drivers/gpu/drm/panthor/panthor_device.h | 381 +++++++++++++++++
> > 2 files changed, 878 insertions(+)
> > create mode 100644 drivers/gpu/drm/panthor/panthor_device.c
> > create mode 100644 drivers/gpu/drm/panthor/panthor_device.h
> >
> > diff --git a/drivers/gpu/drm/panthor/panthor_device.c b/drivers/gpu/drm/panthor/panthor_device.c
> > new file mode 100644
> > index 000000000000..40038bac147a
> > --- /dev/null
> > +++ b/drivers/gpu/drm/panthor/panthor_device.c
> > @@ -0,0 +1,497 @@
> > +// SPDX-License-Identifier: GPL-2.0 or MIT
> > +/* Copyright 2018 Marty E. Plummer <hanetzer at startmail.com> */
> > +/* Copyright 2019 Linaro, Ltd, Rob Herring <robh at kernel.org> */
> > +/* Copyright 2023 Collabora ltd. */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/reset.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_domain.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regulator/consumer.h>
> > +
> > +#include <drm/drm_drv.h>
> > +#include <drm/drm_managed.h>
> > +
> > +#include "panthor_sched.h"
> > +#include "panthor_device.h"
> > +#include "panthor_devfreq.h"
> > +#include "panthor_gpu.h"
> > +#include "panthor_fw.h"
> > +#include "panthor_mmu.h"
> > +#include "panthor_regs.h"
> > +
> > +static int panthor_clk_init(struct panthor_device *ptdev)
> > +{
> > + ptdev->clks.core = devm_clk_get(ptdev->base.dev, NULL);
> > + if (IS_ERR(ptdev->clks.core))
> > + return dev_err_probe(ptdev->base.dev,
> > + PTR_ERR(ptdev->clks.core),
> > + "get 'core' clock failed");
> > +
> > + ptdev->clks.stacks = devm_clk_get_optional(ptdev->base.dev, "stacks");
> > + if (IS_ERR(ptdev->clks.stacks))
> > + return dev_err_probe(ptdev->base.dev,
> > + PTR_ERR(ptdev->clks.stacks),
> > + "get 'stacks' clock failed");
> > +
> > + ptdev->clks.coregroup = devm_clk_get_optional(ptdev->base.dev, "coregroup");
> > + if (IS_ERR(ptdev->clks.coregroup))
> > + return dev_err_probe(ptdev->base.dev,
> > + PTR_ERR(ptdev->clks.coregroup),
> > + "get 'coregroup' clock failed");
> > +
> > + drm_info(&ptdev->base, "clock rate = %lu\n", clk_get_rate(ptdev->clks.core));
> > + return 0;
> > +}
> > +
> > +void panthor_device_unplug(struct panthor_device *ptdev)
> > +{
> > + /* FIXME: This is racy. */
> > + if (drm_dev_is_unplugged(&ptdev->base))
> > + return;
> > +
> > + drm_WARN_ON(&ptdev->base, pm_runtime_get_sync(ptdev->base.dev) < 0);
> > +
> > + /* Call drm_dev_unplug() so any access to HW block happening after
> > + * that point get rejected.
> > + */
> > + drm_dev_unplug(&ptdev->base);
> > +
> > + /* Now, try to cleanly shutdown the GPU before the device resources
> > + * get reclaimed.
> > + */
> > + panthor_sched_unplug(ptdev);
> > + panthor_fw_unplug(ptdev);
> > + panthor_mmu_unplug(ptdev);
> > + panthor_gpu_unplug(ptdev);
> > +
> > + pm_runtime_dont_use_autosuspend(ptdev->base.dev);
> > + pm_runtime_put_sync_suspend(ptdev->base.dev);
> > +}
> > +
> > +static void panthor_device_reset_cleanup(struct drm_device *ddev, void *data)
> > +{
> > + struct panthor_device *ptdev = container_of(ddev, struct panthor_device, base);
> > +
> > + cancel_work_sync(&ptdev->reset.work);
> > + destroy_workqueue(ptdev->reset.wq);
> > +}
> > +
> > +static void panthor_device_reset_work(struct work_struct *work)
> > +{
> > + struct panthor_device *ptdev = container_of(work, struct panthor_device, reset.work);
> > + int ret = 0, cookie;
> > +
> > + if (atomic_read(&ptdev->pm.state) != PANTHOR_DEVICE_PM_STATE_ACTIVE) {
> > + /*
> > + * No need for a reset as the device has been (or will be)
> > + * powered down
> > + */
> > + atomic_set(&ptdev->reset.pending, 0);
> > + return;
> > + }
> > +
> > + if (!drm_dev_enter(&ptdev->base, &cookie))
> > + return;
> > +
> > + panthor_sched_pre_reset(ptdev);
> > + panthor_fw_pre_reset(ptdev, true);
> > + panthor_mmu_pre_reset(ptdev);
> > + panthor_gpu_soft_reset(ptdev);
> > + panthor_gpu_l2_power_on(ptdev);
> > + panthor_mmu_post_reset(ptdev);
> > + ret = panthor_fw_post_reset(ptdev);
> > + if (ret)
> > + goto out_dev_exit;
> > +
> > + atomic_set(&ptdev->reset.pending, 0);
> > + panthor_sched_post_reset(ptdev);
> > +
> > + if (ret) {
> > + panthor_device_unplug(ptdev);
> > + drm_err(&ptdev->base, "Failed to boot MCU after reset, making device unusable.");
> > + }
> > +
> > +out_dev_exit:
> > + drm_dev_exit(cookie);
> > +}
> > +
> > +static bool panthor_device_is_initialized(struct panthor_device *ptdev)
> > +{
> > + return !!ptdev->scheduler;
> > +}
> > +
> > +static void panthor_device_free_page(struct drm_device *ddev, void *data)
> > +{
> > + free_page((unsigned long)data);
> > +}
> > +
> > +int panthor_device_init(struct panthor_device *ptdev)
> > +{
> > + struct resource *res;
> > + struct page *p;
> > + int ret;
> > +
> > + ptdev->coherent = device_get_dma_attr(ptdev->base.dev) == DEV_DMA_COHERENT;
> > +
> > + drmm_mutex_init(&ptdev->base, &ptdev->pm.mmio_lock);
> > + atomic_set(&ptdev->pm.state, PANTHOR_DEVICE_PM_STATE_SUSPENDED);
> > + p = alloc_page(GFP_KERNEL | __GFP_ZERO);
> > + if (!p)
> > + return -ENOMEM;
> > +
> > + ptdev->pm.dummy_latest_flush = page_address(p);
> > + ret = drmm_add_action_or_reset(&ptdev->base, panthor_device_free_page,
> > + ptdev->pm.dummy_latest_flush);
> > + if (ret)
> > + return ret;
> > +
> > + /*
> > + * Set the dummy page holding the latest flush to 1. This will cause the
> > + * flush to avoided as we know it isn't necessary if the submission
> > + * happens while the dummy page is mapped. Zero cannot be used because
> > + * that means 'always flush'.
> > + */
> > + *ptdev->pm.dummy_latest_flush = 1;
> > +
> > + INIT_WORK(&ptdev->reset.work, panthor_device_reset_work);
> > + ptdev->reset.wq = alloc_ordered_workqueue("panthor-reset-wq", 0);
> > + if (!ptdev->reset.wq)
> > + return -ENOMEM;
> > +
> > + ret = drmm_add_action_or_reset(&ptdev->base, panthor_device_reset_cleanup, NULL);
> > + if (ret)
> > + return ret;
> > +
> > + ret = panthor_clk_init(ptdev);
> > + if (ret)
> > + return ret;
> > +
> > + ret = panthor_devfreq_init(ptdev);
> > + if (ret)
> > + return ret;
> > +
> > + ptdev->iomem = devm_platform_get_and_ioremap_resource(to_platform_device(ptdev->base.dev),
> > + 0, &res);
> > + if (IS_ERR(ptdev->iomem))
> > + return PTR_ERR(ptdev->iomem);
> > +
> > + ptdev->phys_addr = res->start;
> > +
> > + ret = devm_pm_runtime_enable(ptdev->base.dev);
> > + if (ret)
> > + return ret;
> > +
> > + ret = pm_runtime_resume_and_get(ptdev->base.dev);
> > + if (ret)
> > + return ret;
> > +
> > + ret = panthor_gpu_init(ptdev);
> > + if (ret)
> > + goto err_rpm_put;
> > +
> > + ret = panthor_mmu_init(ptdev);
> > + if (ret)
> > + goto err_rpm_put;
> > +
> > + ret = panthor_fw_init(ptdev);
> > + if (ret)
> > + goto err_rpm_put;
> > +
> > + ret = panthor_sched_init(ptdev);
> > + if (ret)
> > + goto err_rpm_put;
> > +
> > + /* ~3 frames */
> > + pm_runtime_set_autosuspend_delay(ptdev->base.dev, 50);
> > + pm_runtime_use_autosuspend(ptdev->base.dev);
> > + pm_runtime_put_autosuspend(ptdev->base.dev);
> > + return 0;
> > +
> > +err_rpm_put:
> > + pm_runtime_put_sync_suspend(ptdev->base.dev);
>
> I'm afraid this is not enough to cleanup the driver if firmware fails to load
> or if panthor_sched_init() fails. I was playing with another device that's
> based on RK3588 and forgot to move the firmware to the new location. I've got
> a kernel crash with an SError due to failure to load the firmware. It was in
> panthor_mmu_irq_raw_handler() which fired because the MMU was not unplugged.
Uh, right. I hate the fact we have to explicitly call the unplug()
functions in that case, but I also don't have a better solution...
>
> My local fix was:
>
> -- >8 --------------------------------------------------------------
> diff --git a/drivers/gpu/drm/panthor/panthor_device.c b/drivers/gpu/drm/panthor/panthor_device.c
> index 834b828fc1b59..d8374f8b9333a 100644
> --- a/drivers/gpu/drm/panthor/panthor_device.c
> +++ b/drivers/gpu/drm/panthor/panthor_device.c
> @@ -224,15 +224,15 @@ int panthor_device_init(struct panthor_device *ptdev)
>
> ret = panthor_mmu_init(ptdev);
> if (ret)
> - goto err_rpm_put;
> + goto err_mmu_init;
All the label names encode the unwind operation they're taking care of,
so s/err_mmu_init/err_unplug_gpu/.
>
> ret = panthor_fw_init(ptdev);
> if (ret)
> - goto err_rpm_put;
> + goto err_fw_init;
>
> ret = panthor_sched_init(ptdev);
> if (ret)
> - goto err_rpm_put;
> + goto err_sched_init;
>
> /* ~3 frames */
> pm_runtime_set_autosuspend_delay(ptdev->base.dev, 50);
> @@ -240,6 +240,12 @@ int panthor_device_init(struct panthor_device *ptdev)
> pm_runtime_put_autosuspend(ptdev->base.dev);
> return 0;
>
> +err_sched_init:
> + panthor_fw_unplug(ptdev);
> +err_fw_init:
> + panthor_mmu_unplug(ptdev);
> +err_mmu_init:
> + panthor_gpu_unplug(ptdev);
> err_rpm_put:
> pm_runtime_put_sync_suspend(ptdev->base.dev);
> return ret;
>
> -- >8 -------------------------------------------------------------
>
> I can send a fully formed patch if you agree with the fix.
I'll take care of send when preparing v4. Thanks for the offer.
More information about the dri-devel
mailing list