[PATCH 0/8] Add display support for stm32f769-disco board

[Dario Binacchi]

The series adds display support for the stm32f769-disco board. It has been
tested on hardware revisions MB1225-B03 and MB1166-A09. This required
modifications to the nt35510 driver. As I do not have the Hydis HVA40WV1
display, it would be better if someone tested the driver in that
configuration.


Dario Binacchi (8):
  dt-bindings: mfd: stm32f7: Add binding definition for DSI
  ARM: dts: stm32: add DSI support on stm32f769
  ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
  ARM: dts: stm32: add display support on stm32f769-disco
  dt-bindings: nt35510: add compatible for FRIDA FRD400B25025-A-CTK
  ARM: dts: add stm32f769-disco-mb1225-revb03-mb1166-reva09
  drm/panel: nt35510: refactor panel initialization
  drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK

 .../display/panel/novatek,nt35510.yaml        |  20 +-
 arch/arm/boot/dts/st/Makefile                 |   1 +
 ...f769-disco-mb1225-revb03-mb1166-reva09.dts |  13 +
 arch/arm/boot/dts/st/stm32f769-disco.dts      |  78 +-
 arch/arm/boot/dts/st/stm32f769.dtsi           |  21 +
 drivers/gpu/drm/panel/panel-novatek-nt35510.c | 872 +++++-------------
 include/dt-bindings/mfd/stm32f7-rcc.h         |   1 +
 7 files changed, 362 insertions(+), 644 deletions(-)
 create mode 100644 arch/arm/boot/dts/st/stm32f769-disco-mb1225-revb03-mb1166-reva09.dts
 create mode 100644 arch/arm/boot/dts/st/stm32f769.dtsi

-- 
2.43.0