[PATCH v11 7/9] dt-bindings: display: bridge: it6505: Add mode-switch support

[Chen-Yu Tsai]

On Sat, Feb 4, 2023 at 9:31 PM Pin-yen Lin <treapking at chromium.org> wrote:
>
> ITE IT6505 can be used in systems to switch the DP traffic between
> two downstreams, which can be USB Type-C DisplayPort alternate mode
> lane or regular DisplayPort output ports.
>
> Update the binding to accommodate this usage by introducing a
> data-lanes and a mode-switch property on endpoints.
>
> Signed-off-by: Pin-yen Lin <treapking at chromium.org>
>
> ---
>
> Changes in v11:
> - Updated the description of the endpoints in the bindings
> - Referenced video-interfaces.yaml instead for the endpoints binding
> - Removed duplicated definitions from inherited schema
>
> Changes in v9:
> - Fixed subject prefix again
> - Changed the naming of the example node for it6505
>
> Changes in v8:
> - Updated bindings for data-lanes property
> - Fixed subject prefix
>
> Changes in v7:
> - Fixed issues reported by dt_binding_check.
> - Updated the schema and the example dts for data-lanes.
> - Changed to generic naming for the example dts node.
>
> Changes in v6:
> - Remove switches node and use endpoints and data-lanes property to
>   describe the connections.
>
>  .../bindings/display/bridge/ite,it6505.yaml   | 101 +++++++++++++++---
>  1 file changed, 88 insertions(+), 13 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> index b16a9d9127dd..8ae9c5cba22c 100644
> --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> @@ -75,22 +75,49 @@ properties:
>        port at 1:
>          $ref: /schemas/graph.yaml#/$defs/port-base
>          unevaluatedProperties: false
> -        description: Video port for DP output
> +        description:
> +          Video port for DP output. Each endpoint connects to a video output
> +          downstream, and the "data-lanes" property is used to describe the pin
> +          connections. 0, 1, 2, 3 in "data-lanes" maps to TX0, TX1, TX2, TX3,
> +          respectively.
>
> -        properties:
> -          endpoint:
> -            $ref: /schemas/graph.yaml#/$defs/endpoint-base
> +
> +        patternProperties:
> +          "^endpoint@[01]$":
> +            $ref: /schemas/media/video-interfaces.yaml#
>              unevaluatedProperties: false
>
>              properties:
> +              reg: true
> +
> +              remote-endpoint: true
> +
>                data-lanes:
> -                minItems: 1
> -                uniqueItems: true
> -                items:
> -                  - enum: [ 0, 1 ]
> -                  - const: 1
> -                  - const: 2
> -                  - const: 3
> +                oneOf:
> +                  - items:
> +                      - enum: [0, 1, 2, 3]

Based on the datasheets we have and the downstream driver, I assume
the hardware implements "lane swap" as simply reversing the order
of the output pins.

In that case the hardware can't output 1 lane DP on any arbitrary lane,
but only lane 0 or 3.

> +                  - items:
> +                      - const: 0
> +                      - const: 1
> +
> +                  - items:
> +                      - const: 2
> +                      - const: 3

And maybe a bit pedantic, but have the order correct as:

    - const: 3
    - const: 2

> +                  - items:
> +                      - const: 0
> +                      - const: 1
> +                      - const: 2
> +                      - const: 3
> +
> +              mode-switch:
> +                type: boolean
> +                description: Register this node as a Type-C mode switch or not.

Same as the anx7625 patch, I would reword this as "Serves as Type-C mode
switch if present".


ChenYu


> +
> +            required:
> +              - reg
> +              - remote-endpoint
>
>      required:
>        - port at 0
> @@ -102,7 +129,6 @@ required:
>    - pwr18-supply
>    - interrupts
>    - reset-gpios
> -  - extcon
>    - ports
>
>  additionalProperties: false
> @@ -139,8 +165,11 @@ examples:
>                  };
>
>                  port at 1 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
>                      reg = <1>;
> -                    it6505_out: endpoint {
> +                    it6505_out: endpoint at 0 {
> +                        reg = <0>;
>                          remote-endpoint = <&dp_in>;
>                          data-lanes = <0 1>;
>                      };
> @@ -148,3 +177,49 @@ examples:
>              };
>          };
>      };
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        dp-bridge at 5c {
> +            compatible = "ite,it6505";
> +            interrupts = <8 IRQ_TYPE_LEVEL_LOW 8 0>;
> +            reg = <0x5c>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&it6505_pins>;
> +            ovdd-supply = <&mt6366_vsim2_reg>;
> +            pwr18-supply = <&pp1800_dpbrdg_dx>;
> +            reset-gpios = <&pio 177 0>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                port at 0 {
> +                    reg = <0>;
> +                    it6505_dpi_in: endpoint {
> +                        remote-endpoint = <&dpi_out>;
> +                    };
> +                };
> +                port at 1 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    reg = <1>;
> +                    ite_typec0: endpoint at 0 {
> +                        reg = <0>;
> +                        mode-switch;
> +                        data-lanes = <0 1>;
> +                        remote-endpoint = <&typec_port0>;
> +                    };
> +                    ite_typec1: endpoint at 1 {
> +                        reg = <1>;
> +                        mode-switch;
> +                        data-lanes = <2 3>;
> +                        remote-endpoint = <&typec_port1>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> --
> 2.39.1.519.gcb327c4b5f-goog
>