[PATCH 5/5] arm64: dst: qcom: sm8450: add dp controller

[Konrad Dybcio]

On 6.02.2023 11:17, Neil Armstrong wrote:
> Add the Display Port controller subnode to the MDSS node.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8450-hdk.dts |  4 +-
>  arch/arm64/boot/dts/qcom/sm8450.dtsi    | 82 +++++++++++++++++++++++++++++++--
>  2 files changed, 82 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> index 5bdc2c1159ae..1b4ef79f74b3 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
> @@ -480,7 +480,9 @@ &mdss_dsi0_phy {
>  	status = "okay";
>  };
>  
> -&mdss_mdp {
> +&mdss_dp0 {
> +	data-lanes = <0 1 2 3>;
> +
>  	status = "okay";
>  };
This belongs in a separate patch.

>  
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 757b7c56d5f5..8d83545d5e4a 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -2745,13 +2745,20 @@ ports {
>  
>  					port at 0 {
>  						reg = <0>;
> -						dpu_intf1_out: endpoint {
> -							remote-endpoint = <&mdss_dsi0_in>;
> +						dpu_intf0_out: endpoint {
> +							remote-endpoint = <&mdss_dp0_in>;
>  						};
>  					};
>  
>  					port at 1 {
>  						reg = <1>;
> +						dpu_intf1_out: endpoint {
> +							remote-endpoint = <&mdss_dsi0_in>;
> +						};
> +					};
> +
> +					port at 2 {
> +						reg = <2>;
>  						dpu_intf2_out: endpoint {
>  							remote-endpoint = <&mdss_dsi1_in>;
>  						};
> @@ -2789,6 +2796,75 @@ opp-500000000 {
>  				};
>  			};
>  
> +			mdss_dp0: displayport-controller at ae90000 {
> +				compatible = "qcom,sm8350-dp";
> +				reg = <0 0xae90000 0 0x0fc>,
Trim the leading zeroes from the size part, please.

> +				      <0 0xae90200 0 0x0c0>,
> +				      <0 0xae90400 0 0x770>,
> +				      <0 0xae91000 0 0x098>;
> +				interrupt-parent = <&mdss>;
> +				interrupts = <12>;
> +				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
> +					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
> +					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
> +					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +			                      "ctrl_link_iface", "stream_pixel";
Make this a vertical list, please.

Konrad
> +
> +				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
> +						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&usb_1_qmpphy 1>,
> +							 <&usb_1_qmpphy 2>;
> +
> +				phys = <&usb_1_qmpphy 1>;
> +			        phy-names = "dp";
> +
> +			        #sound-dai-cells = <0>;
> +
> +				operating-points-v2 = <&dp_opp_table>;
> +				power-domains = <&rpmhpd SM8450_MMCX>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port at 0 {
> +						reg = <0>;
> +						mdss_dp0_in: endpoint {
> +							remote-endpoint = <&dpu_intf0_out>;
> +						};
> +					};
> +				};
> +
> +				dp_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +
>  			mdss_dsi0: dsi at ae94000 {
>  				compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
>  				reg = <0 0x0ae94000 0 0x400>;
> @@ -2966,8 +3042,8 @@ dispcc: clock-controller at af00000 {
>  				 <&mdss_dsi0_phy 1>,
>  				 <&mdss_dsi1_phy 0>,
>  				 <&mdss_dsi1_phy 1>,
> -				 <&usb_1_qmpphy 0>,
>  				 <&usb_1_qmpphy 1>,
> +				 <&usb_1_qmpphy 2>,
>  				 <0>, /* dp1 */
>  				 <0>,
>  				 <0>, /* dp2 */
>