[PATCH v2 2/5] arm64: dts: qcom: sm8350: switch to combo usb3/dp phy

Neil Armstrong neil.armstrong at linaro.org
Fri Feb 10 10:34:51 UTC 2023


The first QMP PHY is an USB3/DP combo phy, switch to the newly
documented bindings and register the clocks to the GCC
and DISPCC controllers.

Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 40 ++++++++++++------------------------
 1 file changed, 13 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 04bb838189a6..d490ce84a022 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -652,7 +652,7 @@ gcc: clock-controller at 100000 {
 				 <&ufs_mem_phy_lanes 0>,
 				 <&ufs_mem_phy_lanes 1>,
 				 <&ufs_mem_phy_lanes 2>,
-				 <0>,
+				 <&usb_1_qmpphy 0>,
 				 <0>;
 		};
 
@@ -2601,37 +2601,24 @@ usb_2_hsphy: phy at 88e4000 {
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy-wrapper at 88e9000 {
-			compatible = "qcom,sm8350-qmp-usb3-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x20>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_1_qmpphy: phy at 88e9000 {
+			compatible = "qcom,sm8350-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: phy at 88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
 		};
 
 		usb_2_qmpphy: phy-wrapper at 88eb000 {
@@ -2727,7 +2714,7 @@ usb_1_dwc3: usb at a600000 {
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy 0>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -3092,8 +3079,7 @@ dispcc: clock-controller at af00000 {
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
 				 <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
-				 <0>,
-				 <0>;
+				 <&usb_1_qmpphy 1>, <&usb_1_qmpphy 2>;
 			clock-names = "bi_tcxo",
 				      "dsi0_phy_pll_out_byteclk",
 				      "dsi0_phy_pll_out_dsiclk",

-- 
2.34.1



More information about the dri-devel mailing list