[PATCH 2/3] drm/i915/hwmon: Enable PL1 limit when writing limit value to HW

[Ashutosh Dixit]

Previous documentation suggested that the PL1 power limit is always enabled
in HW. However we now find this not to be the case on some platforms (such
as ATSM). Therefore enable the PL1 power limit (by setting the enable bit)
when writing the PL1 limit value to HW.

Bspec: 51864

Signed-off-by: Ashutosh Dixit <ashutosh.dixit at intel.com>
---
 drivers/gpu/drm/i915/i915_hwmon.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 85195d61f89c7..7c20a6f47b92e 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -385,10 +385,11 @@ hwm_power_max_write(struct hwm_drvdata *ddat, long val)
 
 	/* Computation in 64-bits to avoid overflow. Round to nearest. */
 	nval = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_power, SF_POWER);
+	nval = PKG_PWR_LIM_1_EN | REG_FIELD_PREP(PKG_PWR_LIM_1, nval);
 
 	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
-					    PKG_PWR_LIM_1,
-					    REG_FIELD_PREP(PKG_PWR_LIM_1, nval));
+					    PKG_PWR_LIM_1_EN | PKG_PWR_LIM_1,
+					    nval);
 	return 0;
 }
 
-- 
2.38.0