[RESEND PATCHv2 2/2] i915/display/dp: SDP CRC16 for 128b132b link layer

[Arun R Murthy]

Enable SDP error detection configuration, this will set CRC16 in
128b/132b link layer.
For Display version 13 a hardware bit31 in register VIDEO_DIP_CTL is
added to enable/disable SDP CRC applicable for DP2.0 only, but the
default value of this bit will enable CRC16 in 128b/132b hence
skipping this write.
Corrective actions on SDP corruption is yet to be defined.

v2: Moved the CRC enable to link training init(Jani N)
v3: Moved crc enable to ddi pre enable <Jani N>

Signed-off-by: Arun R Murthy <arun.r.murthy at intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 254559abedfb..fa995341614d 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -2330,6 +2330,18 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 				 crtc_state->port_clock,
 				 crtc_state->lane_count);
 
+	/* DP v2.0 SCR on SDP CRC16 for 128b/132b Link Layer */
+	if (intel_dp_is_uhbr(crtc_state))
+		drm_dp_dpcd_writeb(&intel_dp->aux,
+				   DP_SDP_ERROR_DETECTION_CONFIGURATION,
+				   DP_SDP_CRC16_128B132B_EN);
+		/*
+		 * VIDEO_DIP_CTL register bit 31 should be set to '0' to not
+		 * disable SDP CRC. This is applicable for Display version 13.
+		 * Default value of bit 31 is '0' hence discarding the write
+		 */
+		/* TODO: Corrective actions on SDP corruption yet to be defined */
+
 	/*
 	 * We only configure what the register value will be here.  Actual
 	 * enabling happens during link training farther down.
-- 
2.25.1