[PATCH] drm/gem: Expose the buffer object handle to userspace last

Christian König christian.koenig at amd.com
Tue Feb 14 13:59:38 UTC 2023


Am 14.02.23 um 13:50 schrieb Tvrtko Ursulin:
> From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
>
> Currently drm_gem_handle_create_tail exposes the handle to userspace
> before the buffer object constructions is complete. This allowing
> of working against a partially constructed object, which may also be in
> the process of having its creation fail, can have a range of negative
> outcomes.
>
> A lot of those will depend on what the individual drivers are doing in
> their obj->funcs->open() callbacks, and also with a common failure mode
> being -ENOMEM from drm_vma_node_allow.
>
> We can make sure none of this can happen by allocating a handle last,
> although with a downside that more of the function now runs under the
> dev->object_name_lock.
>
> Looking into the individual drivers open() hooks, we have
> amdgpu_gem_object_open which seems like it could have a potential security
> issue without this change.
>
> A couple drivers like qxl_gem_object_open and vmw_gem_object_open
> implement no-op hooks so no impact for them.
>
> A bunch of other require a deeper look by individual owners to asses for
> impact. Those are lima_gem_object_open, nouveau_gem_object_open,
> panfrost_gem_open, radeon_gem_object_open and virtio_gpu_gem_object_open.
>
> Putting aside the risk assesment of the above, some common scenarios to
> think about are along these lines:
>
> 1)
> Userspace closes a handle by speculatively "guessing" it from a second
> thread.
>
> This results in an unreachable buffer object so, a memory leak.
>
> 2)
> Same as 1), but object is in the process of getting closed (failed
> creation).
>
> The second thread is then able to re-cycle the handle and idr_remove would
> in the first thread would then remove the handle it does not own from the
> idr.
>
> 3)
> Going back to the earlier per driver problem space - individual impact
> assesment of allowing a second thread to access and operate on a partially
> constructed handle / object. (Can something crash? Leak information?)
>
> In terms of identifying when the problem started I will tag some patches
> as references, but not all, if even any, of them actually point to a
> broken state. I am just identifying points at which more opportunity for
> issues to arise was added.

Yes I've looked into this once as well, but couldn't completely solve it 
for some reason.

Give me a day or two to get this tested and all the logic swapped back 
into my head again.

Christian.

>
> References: 304eda32920b ("drm/gem: add hooks to notify driver when object handle is created/destroyed")
> References: ca481c9b2a3a ("drm/gem: implement vma access management")
> References: b39b5394fabc ("drm/gem: Add drm_gem_object_funcs")
> Cc: dri-devel at lists.freedesktop.org
> Cc: Rob Clark <robdclark at chromium.org>
> Cc: Ben Skeggs <bskeggs at redhat.com>
> Cc: David Herrmann <dh.herrmann at gmail.com>
> Cc: Noralf Trønnes <noralf at tronnes.org>
> Cc: David Airlie <airlied at gmail.com>
> Cc: Daniel Vetter <daniel at ffwll.ch>
> Cc: amd-gfx at lists.freedesktop.org
> Cc: lima at lists.freedesktop.org
> Cc: nouveau at lists.freedesktop.org
> Cc: Steven Price <steven.price at arm.com>
> Cc: virtualization at lists.linux-foundation.org
> Cc: spice-devel at lists.freedesktop.org
> Cc: Zack Rusin <zackr at vmware.com>
> ---
>   drivers/gpu/drm/drm_gem.c | 48 +++++++++++++++++++--------------------
>   1 file changed, 24 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
> index aa15c52ae182..e3d897bca0f2 100644
> --- a/drivers/gpu/drm/drm_gem.c
> +++ b/drivers/gpu/drm/drm_gem.c
> @@ -356,52 +356,52 @@ drm_gem_handle_create_tail(struct drm_file *file_priv,
>   			   u32 *handlep)
>   {
>   	struct drm_device *dev = obj->dev;
> -	u32 handle;
>   	int ret;
>   
>   	WARN_ON(!mutex_is_locked(&dev->object_name_lock));
>   	if (obj->handle_count++ == 0)
>   		drm_gem_object_get(obj);
>   
> +	ret = drm_vma_node_allow(&obj->vma_node, file_priv);
> +	if (ret)
> +		goto err_put;
> +
> +	if (obj->funcs->open) {
> +		ret = obj->funcs->open(obj, file_priv);
> +		if (ret)
> +			goto err_revoke;
> +	}
> +
>   	/*
> -	 * Get the user-visible handle using idr.  Preload and perform
> -	 * allocation under our spinlock.
> +	 * Get the user-visible handle using idr as the _last_ step.
> +	 * Preload and perform allocation under our spinlock.
>   	 */
>   	idr_preload(GFP_KERNEL);
>   	spin_lock(&file_priv->table_lock);
> -
>   	ret = idr_alloc(&file_priv->object_idr, obj, 1, 0, GFP_NOWAIT);
> -
>   	spin_unlock(&file_priv->table_lock);
>   	idr_preload_end();
>   
> -	mutex_unlock(&dev->object_name_lock);
>   	if (ret < 0)
> -		goto err_unref;
> -
> -	handle = ret;
> +		goto err_close;
>   
> -	ret = drm_vma_node_allow(&obj->vma_node, file_priv);
> -	if (ret)
> -		goto err_remove;
> +	mutex_unlock(&dev->object_name_lock);
>   
> -	if (obj->funcs->open) {
> -		ret = obj->funcs->open(obj, file_priv);
> -		if (ret)
> -			goto err_revoke;
> -	}
> +	*handlep = ret;
>   
> -	*handlep = handle;
>   	return 0;
>   
> +err_close:
> +	if (obj->funcs->close)
> +		obj->funcs->close(obj, file_priv);
>   err_revoke:
>   	drm_vma_node_revoke(&obj->vma_node, file_priv);
> -err_remove:
> -	spin_lock(&file_priv->table_lock);
> -	idr_remove(&file_priv->object_idr, handle);
> -	spin_unlock(&file_priv->table_lock);
> -err_unref:
> -	drm_gem_object_handle_put_unlocked(obj);
> +err_put:
> +	if (--obj->handle_count == 0)
> +		drm_gem_object_put(obj);
> +
> +	mutex_unlock(&dev->object_name_lock);
> +
>   	return ret;
>   }
>   



More information about the dri-devel mailing list