[PATCH 10/32] drm/amdgpu: add gfx11 hw debug mode enable and disable calls
Felix Kuehling
felix.kuehling at amd.com
Thu Feb 16 23:19:00 UTC 2023
On 2023-01-25 14:53, Jonathan Kim wrote:
> Implement the per-device calls to enable or disable HW debug mode
> for GFX11.
>
> Signed-off-by: Jonathan Kim <jonathan.kim at amd.com>
> ---
> .../drm/amd/amdgpu/amdgpu_amdkfd_gfx_v11.c | 39 +++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v11.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v11.c
> index 7e80caa05060..34aeff692eba 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v11.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v11.c
> @@ -30,6 +30,7 @@
> #include "soc15d.h"
> #include "v11_structs.h"
> #include "soc21.h"
> +#include <uapi/linux/kfd_ioctl.h>
What is this needed for? Maybe for a later patch?
>
> enum hqd_dequeue_request_type {
> NO_ACTION = 0,
> @@ -606,6 +607,42 @@ static void set_vm_context_page_table_base_v11(struct amdgpu_device *adev,
> adev->gfxhub.funcs->setup_vm_pt_regs(adev, vmid, page_table_base);
> }
>
> +/**
Use /* here.
> + * Returns TRAP_EN, EXCP_EN and EXCP_REPLACE.
> + *
> + * restore_dbg_reisters is ignored here but is a general interface requirement
Typo: registers
With those fixed, the patch is
Reviewed-by: Felix Kuehling <Felix.Kuehling at amd.com>
> + * for devices that support GFXOFF and where the RLC save/restore list
> + * does not support hw registers for debugging i.e. the driver has to manually
> + * initialize the debug mode registers after it has disabled GFX off during the
> + * debug session.
> + */
> +static uint32_t kgd_gfx_v11_enable_debug_trap(struct amdgpu_device *adev,
> + bool restore_dbg_registers,
> + uint32_t vmid)
> +{
> + uint32_t data = 0;
> +
> + data = REG_SET_FIELD(data, SPI_GDBG_PER_VMID_CNTL, TRAP_EN, 1);
> + data = REG_SET_FIELD(data, SPI_GDBG_PER_VMID_CNTL, EXCP_EN, 0);
> + data = REG_SET_FIELD(data, SPI_GDBG_PER_VMID_CNTL, EXCP_REPLACE, 0);
> +
> + return data;
> +}
> +
> +/* Returns TRAP_EN, EXCP_EN and EXCP_REPLACE. */
> +static uint32_t kgd_gfx_v11_disable_debug_trap(struct amdgpu_device *adev,
> + bool keep_trap_enabled,
> + uint32_t vmid)
> +{
> + uint32_t data = 0;
> +
> + data = REG_SET_FIELD(data, SPI_GDBG_PER_VMID_CNTL, TRAP_EN, keep_trap_enabled);
> + data = REG_SET_FIELD(data, SPI_GDBG_PER_VMID_CNTL, EXCP_EN, 0);
> + data = REG_SET_FIELD(data, SPI_GDBG_PER_VMID_CNTL, EXCP_REPLACE, 0);
> +
> + return data;
> +}
> +
> const struct kfd2kgd_calls gfx_v11_kfd2kgd = {
> .program_sh_mem_settings = program_sh_mem_settings_v11,
> .set_pasid_vmid_mapping = set_pasid_vmid_mapping_v11,
> @@ -622,4 +659,6 @@ const struct kfd2kgd_calls gfx_v11_kfd2kgd = {
> .wave_control_execute = wave_control_execute_v11,
> .get_atc_vmid_pasid_mapping_info = NULL,
> .set_vm_context_page_table_base = set_vm_context_page_table_base_v11,
> + .enable_debug_trap = kgd_gfx_v11_enable_debug_trap,
> + .disable_debug_trap = kgd_gfx_v11_disable_debug_trap
> };
More information about the dri-devel
mailing list