[PATCH v4 2/6] drm: lcdif: Drop unnecessary NULL pointer check on lcdif->bridge

Liu Ying victor.liu at nxp.com
Fri Feb 17 06:54:03 UTC 2023


A valid bridge is already found in lcdif_attach_bridge() and set
to lcdif->bridge, so lcdif->bridge cannot be a NULL pointer. Drop
the unnecessary NULL pointer check in KMS stage.

Reviewed-by: Alexander Stein <alexander.stein at ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu at nxp.com>
---
v3->v4:
* Add Alexander's R-b tag.

v2->v3:
* No change.

v1->v2:
* Split from patch 2/2 in v1. (Marek, Alexander)

 drivers/gpu/drm/mxsfb/lcdif_kms.c | 33 +++++++++++--------------------
 1 file changed, 12 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/mxsfb/lcdif_kms.c b/drivers/gpu/drm/mxsfb/lcdif_kms.c
index 262bc43b1079..e54200a9fcb9 100644
--- a/drivers/gpu/drm/mxsfb/lcdif_kms.c
+++ b/drivers/gpu/drm/mxsfb/lcdif_kms.c
@@ -394,7 +394,7 @@ static void lcdif_crtc_mode_set_nofb(struct lcdif_drm_private *lcdif,
 	struct drm_display_mode *m = &lcdif->crtc.state->adjusted_mode;
 	u32 bus_flags = 0;
 
-	if (lcdif->bridge && lcdif->bridge->timings)
+	if (lcdif->bridge->timings)
 		bus_flags = lcdif->bridge->timings->input_bus_flags;
 	else if (bridge_state)
 		bus_flags = bridge_state->input_bus_cfg.flags;
@@ -463,30 +463,21 @@ static void lcdif_crtc_atomic_enable(struct drm_crtc *crtc,
 	struct drm_display_mode *m = &lcdif->crtc.state->adjusted_mode;
 	struct drm_bridge_state *bridge_state = NULL;
 	struct drm_device *drm = lcdif->drm;
-	u32 bus_format = 0;
+	u32 bus_format;
 	dma_addr_t paddr;
 
-	/* If there is a bridge attached to the LCDIF, use its bus format */
-	if (lcdif->bridge) {
-		bridge_state =
-			drm_atomic_get_new_bridge_state(state,
-							lcdif->bridge);
-		if (!bridge_state)
-			bus_format = MEDIA_BUS_FMT_FIXED;
-		else
-			bus_format = bridge_state->input_bus_cfg.format;
-
-		if (bus_format == MEDIA_BUS_FMT_FIXED) {
-			dev_warn_once(drm->dev,
-				      "Bridge does not provide bus format, assuming MEDIA_BUS_FMT_RGB888_1X24.\n"
-				      "Please fix bridge driver by handling atomic_get_input_bus_fmts.\n");
-			bus_format = MEDIA_BUS_FMT_RGB888_1X24;
-		}
-	}
+	bridge_state = drm_atomic_get_new_bridge_state(state, lcdif->bridge);
+	if (!bridge_state)
+		bus_format = MEDIA_BUS_FMT_FIXED;
+	else
+		bus_format = bridge_state->input_bus_cfg.format;
 
-	/* If all else fails, default to RGB888_1X24 */
-	if (!bus_format)
+	if (bus_format == MEDIA_BUS_FMT_FIXED) {
+		dev_warn_once(drm->dev,
+			      "Bridge does not provide bus format, assuming MEDIA_BUS_FMT_RGB888_1X24.\n"
+			      "Please fix bridge driver by handling atomic_get_input_bus_fmts.\n");
 		bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+	}
 
 	clk_set_rate(lcdif->clk, m->crtc_clock * 1000);
 
-- 
2.37.1



More information about the dri-devel mailing list