[PATCH 1/2] Mips: ls2k1000: dts: add the display controller device node

[Krzysztof Kozlowski]

On 23/02/2023 09:21, suijingfeng wrote:
> 
> On 2023/2/23 16:05, Krzysztof Kozlowski wrote:
>> On 23/02/2023 08:58, Krzysztof Kozlowski wrote:
>>> On 23/02/2023 04:19, Sui jingfeng wrote:
>>>> Hi,
>>>>
>>>> On 2023/2/23 02:32, Krzysztof Kozlowski wrote:
>>>>> On 22/02/2023 17:55, suijingfeng wrote:
>>>>>> The display controller is a pci device, it's pci vendor id is
>>>>>> 0x0014, it's pci device id is 0x7a06.
>>>>>>
>>>>>> Signed-off-by: suijingfeng <suijingfeng at loongson.cn>
>>>>>> ---
>>>>>>    .../boot/dts/loongson/loongson64-2k1000.dtsi  | 21 +++++++++++++++++++
>>>>>>    1 file changed, 21 insertions(+)
>>>>>>
>>>>>> diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>>>>>> index 8143a61111e3..a528af3977d9 100644
>>>>>> --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>>>>>> +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
>>>>>> @@ -31,6 +31,18 @@ memory at 200000 {
>>>>>>    			<0x00000001 0x10000000 0x00000001 0xb0000000>; /* 6912 MB at 4352MB */
>>>>>>    	};
>>>>>>    
>>>>>> +	reserved-memory {
>>>>>> +		#address-cells = <2>;
>>>>>> +		#size-cells = <2>;
>>>>>> +		ranges;
>>>>>> +
>>>>>> +		display_reserved: framebuffer at 30000000 {
>>>>>> +			compatible = "shared-dma-pool";
>>>>>> +			reg = <0x0 0x30000000 0x0 0x04000000>; /* 64M */
>>>>>> +			linux,cma-default;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>>    	cpu_clk: cpu_clk {
>>>>>>    		#clock-cells = <0>;
>>>>>>    		compatible = "fixed-clock";
>>>>>> @@ -198,6 +210,15 @@ sata at 8,0 {
>>>>>>    				interrupt-parent = <&liointc0>;
>>>>>>    			};
>>>>>>    
>>>>>> +			display-controller at 6,0 {
>>>>>> +				compatible = "loongson,ls2k1000-dc";
>>>>>> +
>>>>>> +				reg = <0x3000 0x0 0x0 0x0 0x0>;
>>>>>> +				interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
>>>>>> +				interrupt-parent = <&liointc0>;
>>>>>> +				memory-region = <&display_reserved>;
>>>>> NAK.
>>>> Err :(,  please give me a chance to explain
>>>>> Test your code against the bindings you send.
>>>> I can guarantee to you that I test may code more than twice. The code
>>>> used to testing is listed at link [1].
>>> I wrote - test against the bindings. I don't believe that it was tested.
>>> Please paste the output of the testing (dtbs_check).
>> OTOH, dtschema has some hickups on loongsoon DTS, so I doubt you could
>> even test it. Anyway, where is above property memory-region described in
>> the bindings?
> 
> Yes, you are right. I forget to write memory-region property.
> 
> but the code provided in  loongson64-2k1000.dtsi is correct.
> 
> I do run dt_binding_check, the results seems good.

dt_binding_check checks the binding. We talk about your DTS.

> 
> there are some problem when make dtbs_check, but it seems not relevant 
> to me.

Yeah, the dtbs_check hash troubles with interrupt cells and it does not
give reasonable warning message.

Best regards,
Krzysztof