[RFC PATCH 3/7] drm/msm/dpu: Disable MDP vsync source selection on DPU 5.0.0 and above

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Sun Jan 1 12:28:11 UTC 2023


On Sat, 31 Dec 2022 at 23:52, Marijn Suijten
<marijn.suijten at somainline.org> wrote:
>
> On 2022-12-31 22:50:02, Marijn Suijten wrote:
> > Since hardware revision 5.0.0 the TE configuration moved out of the
> > PINGPONG block into the INTF block, including vsync source selection
> > that was previously part of MDP top.  Writing to the MDP_VSYNC_SEL
> > register has no effect anymore and is omitted downstream via the
> > DPU/SDE_MDP_VSYNC_SEL feature flag.  This flag is only added to INTF
> > blocks used by hardware prior to 5.0.0.
> >
> > The code that writes to these registers in the INTF block will follow in
> > subsequent patches.
> >
> > Signed-off-by: Marijn Suijten <marijn.suijten at somainline.org>
> > ---
> >  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 33 ++++++++++--
> >  .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |  1 +
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c    | 52 +++++++++++++------
> >  3 files changed, 66 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > index 39d4b293710c..1cfe94494135 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > @@ -407,7 +407,7 @@ static const struct dpu_mdp_cfg msm8998_mdp[] = {
> >       {
> >       .name = "top_0", .id = MDP_TOP,
> >       .base = 0x0, .len = 0x458,
> > -     .features = 0,
> > +     .features = BIT(DPU_MDP_VSYNC_SEL),
> >       .highest_bank_bit = 0x2,
> >       .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> >                       .reg_off = 0x2AC, .bit_off = 0},
> > @@ -436,7 +436,7 @@ static const struct dpu_mdp_cfg sdm845_mdp[] = {
> >       {
> >       .name = "top_0", .id = MDP_TOP,
> >       .base = 0x0, .len = 0x45C,
> > -     .features = BIT(DPU_MDP_AUDIO_SELECT),
> > +     .features = BIT(DPU_MDP_AUDIO_SELECT) | BIT(DPU_MDP_VSYNC_SEL),
> >       .highest_bank_bit = 0x2,
> >       .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> >                       .reg_off = 0x2AC, .bit_off = 0},
> > @@ -512,6 +512,31 @@ static const struct dpu_mdp_cfg sm6115_mdp[] = {
> >       },
> >  };
> >
> > +static const struct dpu_mdp_cfg sdm8150_mdp[] = {
>
> Sometimes it is only possible to spot such things _after_ sending,
> probably the thing that makes us human :)
>
> sm8150_mdp*, not sdm.
>

With this name fixed:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

-- 
With best wishes
Dmitry


More information about the dri-devel mailing list